Repairs of School building 1 Nos in Package No.2 at Sundakudi PUE School building (South face)

Amount

Chipping of concrete and roughening the surface away from the site including all labour charges etc.,s.r p.no-30

Dismantling the existing damaged pressed tiles and removing away away from the site including all labour charges etc.,s.r p.no-30

Dismantling RCC by manual / by using deploying machineries away from the site including all labour charges etc.,s.r p.no-30

Supplying and erecting steel centering for sides and soffitscomplete complying with standard specifications.

Supplying and fabrication of steel for R.C.C.works including cost and conveyance to site and all labour charges etc., complete.

Reinforced cement concrete 1:112:3 mix using 20mm ISS HBG metal including including cost and conveyance and all labour charges

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed 2% of weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete. Complying with standard specifications for 10sqm.50% new and 50% old

Plastering with C.M.1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc.,

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work

Plastering with C.M.1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc.,

Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

BALA painting including cost and conveyance

Distembering two coats with cement plaster surface including cost and conveyance to site and all labours etc., complete.

Wall painting two coats with Emulsion paint including cost and conveyance to site and all labours etc., complete.

Painting two coats with approved colour ready mixed paint including cost and conveyance to site and all labourc etc,complete

Black board Painting two coats with approved colour ready mixed paint including cost and conveyance to site and all labourc etc,complete

Provision for Rain water pipes

Provision for Rain water structure

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110)

Supply and fixing of single box type 4'40 W flu fitting complete with copper chokecopper leads from terminals tot he fitting with tube(SD 89) and condensor with conduit pipe suspension from the ceiling with PVC unsheathed

Provision for Cappal stand and Cubboard Arrangements

Provision for Repairing doors

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SELVARAJ P (BID ID -1563570)