Periodical services to Md accn under AGE B/R-I of GE (N) Bikaner at Military Station Bikaner

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement including taking down cement plaster of any description, any thickness from internal surface complete, all as specified and as directed.

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4, 2nd layer mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, including taking down cement plaster of any description, any thickness from external surface complete, all as specified and as directed. Note : - Supply only integral liquid water proofing compound shall be measured and paid for separately.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement including taking down cement plaster of any description, any thickness complete, all as specified and as directed.

Supply only integral liquid water proofing compound (ISI marked) complete, all as specified and as directed.

M&L for preparation of newly plastered/putty surfaces by brooming down or steel wire brushing scraping down of walls and applying two coats of oil emulsion distemper/OBD of approved tint over a coat of wall primer by using roller/spray machine complete all as specified and as directed.

M&L for preparation of newly plastered/putty surfaces by brooming down or steel wire brushing scraping down of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for preparation of newly plastered/putty surfaces by brooming down or steel wire brushing scraping down of ceiling and applying two coats of oil emulsion distemper/OBD of approved tint over a coat of primer by using roller/spray machine complete all as specified and as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc external surfaces of walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc with mechanical means/grinder (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and as directed.

M&L for applying acrylic wall care putty 1mm average thickness using 1Kg/Sqm in external walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc (thickness vary as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sanding of surface with mechanical wall sander (having mechanical vaccum mechanism & RPM not less than 1500 with sand pad of 240 grit) after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and as directed. Notes: (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer in-Charge through site order.

M&L for applying Two or more coats of water based 100% Premium acrylic emulsion exterior paint of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, anti algai properties of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces applied with roller/fully automatic airless spray machine, allow 6-8 hours to dry the surface in between subsequent coats of paint or primer complete all as specified and as directed.