Providing and fixing of LED Garden Focus Lights and LED Flood Lights for Hoarding Boards for illumination and beautification at View Point of Bhubaneswari OCP, Bhubaneswari Area

Amount

Providing and fixing following capacity TP&N disconnector fuse switch unit inside theexisting panel board with ISI marked HRC fuses including drilling holes in cubicle panel,making connections, etc. as required. 63A TP&N

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V"C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Excavation for cable trenches of depth upto1.2m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. Cable -0.5*0.3*350 m = 52.5 Cum

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sqmm

Providing of LED Spike focus garden light (9-12W) having outdoor type Aluminium body, IP 66 rating water proof , high quality COB chip, 270 rotation angle, multicolour options, BIS approved and 2 years warranty.

Providing of HDPE flexible electrical concealed pipe 1 inch

Providing of Cable Junction box for cable jointing and termination.

Providing of 2.5 Sqmm, 2 core, PVC 1.1Kv grade LT Copper cable

Providing 06 sqmm, 2 core 1.1Kv grade LT Aluminium Service Cable

LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 50 watts

Structural steel work in single section, fixed with connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Total impact of GST for the purpose of CTC

Upendra Singh. (BID ID -1211202)

OMM SHANKAR TRANSPORT (BID ID -1211212)