REPAIR TO DRAIN, BOUNDARY WALL, FENCING, GATES, HARDSTANDING, RAIN WATER HARVESTING SYSTEM ETC IN OTM ACCN IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

Taking down cement plaster or cement lime plaster of any descrption on brick/stone surface of wall or ceiling including racking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

Demolition of brickwork or stone / boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer in Charge.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified and as directed by Engineer in Charge.

,---ditto--- all as per item No 3 herein before but except brick complete all as specified and as directed by Engineer in Charge.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M & L for stone walling of squared rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 except stone complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses max depression 20mm & uses lime or sand stone extra over stone walling complete all as specified and directed.

M & L rendering 15mm thick on brick masonary surfaces on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar (1:4) on stone masonay surface or surface other than fair faces of brick work, finished even and smooth without using extra cement complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in coping apex stone, bed plates, parapets, cills slightly rounded or chamfered angles and throatings including necessary formwork as in coping complete all as specified and directed.

M & L for preparation of new plastered wall surfaces of wall, AC sheet, soffits, chajjas, RCC Jallies, retaining walls etc and applying two coats of cement base paint over and including a coat of alkali resitant primer all as specified and as directed.

M &L preparation of new plastered surfaces of walls , AC sheet, soffits of chajjah of any description and at any position and applying two coats of 100% premium acrylic emulsion exterior paint of required shade (Company Depot Tinted) over and including a coat of primer as per IS 15489:2004 complete all as specified and directed

M &L complete removal of existing treatment using mechanical means on old surfaces of walls , AC sheet, soffits of chajjah of any description and at any position and applying two coats of 100% Premium acrylic emulsion exterior paint of required shade (Company Depot Tinted) as per IS 15489:2004, complete all as specified and directed

M &L complete removal of existing treatment using mechanical means on old surfaces of walls and applying two coat of cement base paint (1st quality) of any tint complete all as specified and as directed.

M&L preparation of old concrete/ brick/ stone surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded aggregate) as in surfaces channel and drain complete all as specified and as directed

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement incl form moulds mitred, stoped end etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl form moulds mitred, stoped end etc. complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) any description in any position not otherwise specified not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab ( for manholes etc ), chajjas, drain cover and shelves and similar articles with plain faces complete all as specified and as directed by. Note : Reinforcement shall be measured & paid separatel.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

,---dittio--- all as per item No 22 above but 6mm to 8mm dia complete all as specified and as directed.

Dismantling Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately), one way complete all as specified and as directed.

M&L providing precast cement concrete (1:2:4) louvers and jallies 25mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4 complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L plain cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) in sub base of floors complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as plinth protection finishing even and smooth without using extra cement complete all as specified and as directed

M & L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded agg) complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and incl 25mm thick sand cushion layer complete all as specified and directed.

,---dittio--- all as per item No 33 above but except tiles (Paver block) complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L rubber moulded chequered cement concrete tiles 20cm x 20cm x 20mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed

,---ditto--- all as per item No 36 above but except tiles complete all as specified and directed.

M&L chequered stone finished exterior coloured heavy duty/Endura tiles 300mm x 300cm x 10mm thick as in floor/matte finishes etc. laid over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Dholpur stone 16 to 18 mm cladding gang saw cut with macnine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one mumber SS clamps (grade-202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fasterner, polishing, rubbing & including silicon treatment complete all as specified and directed.

M&L for polishing, rubbing including silicon treatment etc for old surface of dholpur stone cladding complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick, size of kota stone 450x450 mm, over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling wrought iron or mild steel work or structural steel work of any description and any position not otherwise specially provided for complete all as specified and directed.

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts complete all as specified and directed.

S&F rolled mild steel work as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-290 GdeE-165 complete all as specified and directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and as directed.

S&F as in repair galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed. Note : Each line wire to be measured.

M & L for Restraining resecuring including making good staples etc complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for chain link fening (in new or old) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F framed such as grills, gratings, etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk way, railings, frame work of water tankand similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

M & L Structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

S & F mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W complete all as specified and as directed.

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240 complete all as specified and as directed.

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed.

M&L pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L- type or J- type or cranked hook bolts complete all as specified and directed.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

M&L for digging out debris, broken stone, soil from rain water harvesting pit upto depth 5 meter from natural ground level and all necessary equiipment arrange by contractor complete all as specified & directed

M&L Boring hole in rainwater harvesting pit 250mm dia in any type of soil for installation of PVC/SWR 150mm bore pipe upto 105m deep from GL and boring start from bottom of RWH Pit etc complete all as specified and as directed

S&F 150mm Bore dia PVC/SWR pipe in bore hole complete all as specified and directed

S&F 150mm Bore dia perforated PVC/ SWR pipe in bore hole complete all as specified and directed

M&L for stone aggregate gravel of gauge 3.60 mm, deposited & filling around pipe complete all as specified .

M&L for prearation of new steel surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over and including a coat of red oxide primer all as specified

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/S ROHIT CONSTRUCTION

ANKIT BUILDERS

S.R.Enterprises

M/S MAYANK ASSOCIATE

Rakesh Choudhary Contractor

UNIVERSAL INFRAPROJECT PVT LTD

Shiv Construction Company

J.J.ENGINEERING

MSR INFRATECH