Construction of District Fire Office building and Fire and Rescue Service station building with development works at Shevapet in Salem City under announcement made by the Honble C.M. of Tamil Nadu on 20.04.2023 21.04.2023.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.8 : Earth work excavation for SDR for open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

55.2 : Flat Back Urinal

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

73.1 : 6 way - D.B

73.2 : 4 way - D.B

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket of size 8" x 6" x 4"

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112 : S & F of Exhaust Fan 300 mm dia

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.2.1.1 : Standardised concrete Mix M25 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First floor

c. In Second floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

15.1.1: Cuddappa slab 20 mm tk.for C/B slab. (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

15.2.1: Cuddappa slab 40 mm tk.for C/B slab. (using crushed stone sand) a. In Ground Floor

b. In First floor

c. In Second floor

16.1.2 : Precast Jally Ventilator 50mm thick. Using standardised M25 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

16.2.1 : Supplying and fixing of Terra cotta jally (Not below 50mm thick) of best quality and fixing in position with cement paste and red-oxide putty including cost of all materials as directed by the departmental officers. (The Terra cotta Jally quality and design shall be got approved by the Executive Engineer before use) a. In Ground Floor

b. In First Floor

c. In Second Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

f. For Curved surface

g. Double centering portico area

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.2.1: Supplying and fixing of solid core flush door shutter of thickness 35mm b) Door size 1500mm x 2400mm (Double Leaf)

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1200mm x 2400mm (Single Leaf)

22.1 : TW panelled single door shutter (without brass fittings) a. 1000 x 2400mm. (Single leaf)

22.1.1 : TW Double leaves panelled door shutter (Aluminium fittings brass screws) a. 1800 x 2400mm.

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.2.1 : Supply and fixing 5.5mm thick plain sheet glass with T.W beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M25) a). Providing pit

b) Augering 30cm dia

44.6.1 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe (UPVC special clamp)

50.1.1 : Supplying and fixing of Precast slab 50mm thick made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including the cost of slab, moulding, laying, curing, transportation, pointing for approach slab and other similar works as directed by the departmental officers.

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1 : Gully Trap using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.3: Supplying and fixing of 63Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.1: Providing additional strutting to centering of plain surface

98.3.2 : TW panelled single door shutter (without brass fittings) a. 900 x 2400mm. (Single leaf)

98.5.4.2: TW Panelled door shutter with brass fittings (Double leaf) a. 1500mm x 2400mm.

105.1 : 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection.

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.4.2.1: Supply and fixing of Granite slab of size 4'x2', 18 to 20mm Thick (Ruby red) laid over in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick a) In Ground Floor

ANNEXURE - II A1: Providing single nosing to the edges of granite slab including required tools and plants etc., all complete.

A2: Supply and Laying of Granite tile of 10mm thk (wall Cladding) in C.M 1:2 Incl. Cost of Materials, Labours etc., all Including (Ruby Red or Satheleri Grey or Jet Blacky ) for lift potion

A3: Supply and fixing of Stainless Steel Health Faucet approved quality with ISI mark including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

A4: Supplying of following LTUG Cable from meter board to fornt of the block and EB pole top for EB service connection etc.., a) 3.5 core 95 sqmm LTUG cable

b) 3.5 core 25 sqmm LTUG cable

A5: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers.

A6: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 25 Sq.mm and 2, 3, 3 1/2, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A7: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable a) Lugs suitable for 95.0 Sqmm UG cable

A8: Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 95.0 Sq mm UG Cable

A9: Supplying and fixing 3 Nos. 63Amps 500 volts porcelain fuse unit

A10: Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type) of size 5.5' x 6.5' x 1' with bus bar chamber Incoming: 3 Nos. 300 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 8 nos. metering chamber.

A11: Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type) of size 5.5' x 6.5' x 1' with bus bar chamber Incoming: 3 Nos. 300 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 4 Nos. metering chamber.

A12: S&F of SINGLE PHASE 4 way DISTRIBUTION BOARD WITH MCBs 4 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 4 ways single phase DB (Higher end) No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 2

A13: S&F of SINGLE PHASE 8 way DISTRIBUTION BOARD WITH MCBs 8 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 8 ways single phase DB (Higher end) No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 6

A14: S&F of VERTICAL THREE PHASE 4 way DISTRIBUTION BOARD WITH MCBS 4 way vertical TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links 4 ways 3 phase DB (Higher end) No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 12

A15: Supply and fixing of 100 amps TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and PWD earthing

A16: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

A17: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

A18: Supplying and fixing of SFRC manhole Cover with frame of size 600mm x 600mm with locking arrangements including of all cost etc., all complete and as directed by the departmental officers.

A19: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A20: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A21: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A22: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A23: Supply, Erection and Commissioning of 1No of Passengers lift (8 Persons - 554 Kgs.) at site (Speed: 1 Metre/Sec, No. of floors: GF + 2 Floors, 3 Landings) according to the standard specification.

A24: Supplying and fixing of following size of Aluminium Dye casting letters with MRF Powder Coating including labour charges for fixing in position cost and conveyance of all materials, T.W plugs, screws metal paste and labour charges etc.,. a) 9" height letters

A25: Supplying and fixing of 15" height TNPHC Emblem (Tamil Stainless Steel letters)

A26: Supply & installation of 2.0 Ton Split Type AC Unit - 5 Star Rated with Copper Coil.

A27: Supplying and fixing of 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling including cost of materials and labour charges etc., all complete and as directed by the departmental officers.

A28: Providing Cornice Work for Gyp Board False Ceiling including cost of materials and labour charges etc., all complete and as directed by the departmental officers.

A29: Supplying and fixing of green chalk board of size 4'x3' feet

A30: Supplying, fixing of 65mm dia GI pipe for hose drying yard including cost of pipe and welding fabricating etc. all complete.

A31: Supplying and laying of Country wood planks for vehicle inspection duct chamber covering

A32: Supplying, fixing & delivery of steel cupboard rack arrangements of following sizes H round frame made up M.S angle 50x50x3mm and cupboard racks made up 0.90x0.60, 16 gauge M.S sheet including cost of labours for fixing in position. Painting the racks two coats over one coat of primer and transportation charges etc., i) 6 Nos. of racks size 1.00x2.10 m

A33: Column gurard and Stickering with Supply retro reflectorised signs made out of High intensity prismatic grade sheeting confirming to IRC 67-2010 and ASTMD495609, Type IV specification and fixed over 3mm thick ACP sheet.

A34: Providing vinyl Board (18" x 4" ) for all rooms the rates includes cost of vinyl board labour for fixing etc,. all complete and as directed by the Departmental Officers.

A35: Supplying and fixing of Gong bell 12'' size suitable for 250V including cost of fittings and labour charges for fixing etc., all complete and as directed by the Departmental Officers.

A36: Supplying and fixing 48W LED street light fittings with necessary connections etc.,(LED OUTDOOR FITTINGS) Higher End Philips /Havells/Equivalent

A37: Supplying and fixing LED Flood Light 150W with Integrated Driver etc., (The brand shall be got approved from the Executive Engineer before use)

A38: Supplying and fixing of PVC Trims at tiles corner with necessary connections etc., (The brand shall be got approved from the Executive Engineer before use)

A39: Supplying and fixing of PVC SWR 160mm dia with ISI mark type- A for Rain water down fall pipe (Using special clamp)

A40: Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

A41: Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

A42: Supply and installation of Advanced Early Streamer Emitter type Lightning arrestor made of AISI 316 Stainless steel NFC 102-17 Standard 79mtrs radius protection

A43: Supply and installation of 50mm dia G.I mast of 5m length with insulators

A44: Supply and Installation of copper 18mm dia Copper rod size of 8 feet length buried in earth

A45: Supply and installation of 70Sq.mm Copper barbed/solid sheathed cable run on the external wall from terrace to the ground floor.

A46: Supply and installation of copper flat size 25 mm x 3 mm run on the external wall

A47: Supplying and laying of Hand drawn copper conductor 8 Gauge on wall/below ground level etc., all complete and as directed by the departmental officers.

A48: Supply and installation of copper plate of size 330 X 330 X 3mm thickness.

A49: Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

A50: Supply and fixing of MS stand for fixing outdoor unit, including cost of all materials etc., all complete and as directed by the departmental Officers.

A51: Providing Ordinary Vertical blinds for windows

A52: Supplying and fixing of 18W LED Fitting (3000K Round type recessed fittings with LED)

A53: Supplying, Fabricating and fixing in position of Bare Galvalume sheet including 4" Dia Vertical post, 3" Dia Truss, 2" x 2" Square tube purlin and 1.5" x 1.5" dia Stiffner, cost of labour charges etc.., all complete.

A54: Drilling of 6" dia (150mm) vertical bore well in Overburden soil including labour charges for insertion of casing pipe in the scheme area to required depth etc., all complete and as directed by the departmental officers.

A55: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the worksite in hard rock areas and developing the borewells etc., all complete and as directed by the departmental officers. a) Up to 150m below Ground Level

b) From 151m up to 180m

c) From 181m up to 210m

d) From 211m up to 240m

A56: Supplying, delivery and fixing of 160mm dia PVC casing pipe 6kg/cm2 of approved quality with ISI mark conforming to IS specifications as per IS 12818/1992 for borewell with average wall thickness of 6.10mm and with inner/outer threaded ends at standard length etc.,

A57: Supplying and fixing of 160mm dia PVC end cap for borewell of best approved quality with ISI mark conforming to IS specifications including cost of materials conveyance to site and labour charges for fixing in position etc., all complete.

A58: Supply of 3 Phase 7.5 HP Submersible Pump without panel board suitable for Borewell Duty - 50lpm x 225m

A59: Supply and delivery of 3.0 HP Submersible Pump without panel board suitable for openwell/Sump

A60: Supply & Fixing of Panel board for 3 H.P Open well submersible motor with two level guard auto start with ISI mark.

A61: Supply & Fixing of Panel board for 7.5 H.P Submersible Pump set with two level guard auto start with ISI mark.

A62: Supply and laying of 3 core of 4 Sqmm submersible PVC Flat cable including cost of all materials etc., all complete and as directed by the departmental officers.

A63: Labour Charges for erection of 7.5 HP Submersible Motor with proper clamps upto the starter. above 5 HP to 10 HP

A64: Labour Charges for erection of 3.00 HP open well Submersible Motor

A65: Supply & laying of 50mm dia UPVC - Column pipe approved quality with ISI mark

A66: Supply & fixing of borewell MS Clamp sets suitable for 150 mm dia borewell etc., all complete

A67: Supplying and fixing of 32mm dia adopter (SS) for connecting submersible pumpset with UPVC pipe etc.

A68: Supplying and delivery of following dia GI, GM, CI, PVC and MS specials of best and approved quality having ISI mark etc., all complete. a) 50mm dia GI Coupling

b) 50mm dia GI Elbow

c) 50mm dia GI Union

d) 50mm dia GI Hex Nipple

e) 50mm dia Gun Metal Gate valve

f) 50mm dia GI Bend

g) 50mm dia GI Tee

h) 50mm dia Non return valve

i) 80mm dia GI bend

j) 80mm dia GI Coupling

k) 80mm dia GI Elbow

l) 80mm dia GI Union

m) 80mm dia GI Hex Nipple

n) 80mm dia Gun Metal Gate valve

o) 80mm dia Non return valve

p) 32mm dia Gun Metal Gate valve

A69: Supplying of 25 mm dia PVC pipes 10 Kg/cm² including all specials etc., completed for casing pipes for 4.0 sq mm submersible flat cable and as directed by the departmental officers.

A70: Labour charges for laying and jointing the 25mm dia PVC pipes as per 10 kg/cm², 150 mm thickness and etc., complete and as directed by the departmental officers.

A71: Supplying and laying of GI pipe "B" class with ISI mark for Below ground level including cost of Eatrh work excavation and refilling ,labour charges, etc complete, all complete and as directed by the departmental officers a) 80 mm dia GI 'B' class pipe

b) 100 mm dia GI 'B' class pipe

A72: Supplying and laying of GI pipe "B" class with ISI mark for above ground level including cost of clamping and labour charges, fixing GI pipes etc complete, all complete and as directed by the departmental officers. a) 80mm dia GI pipe "B" class

b) 50mm dia GI pipe "B" class

A73: Supplying, laying, fixing and jointing the following UPVC pipe as per ASTM-D-1785 of schedule 40 including cost of materials and labour charges for earth work excavation, laying, jointing and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. (Below Ground level). a) 50mm Dia UPVC pipe below GL

A74: Supplying and delivery of following dia UPVC specials of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 50mm dia elbow

b) 50mm dia tee

c) 50mm x 32mm dia reducer Elbow

EEE PEE S AND CO

ASR CONSTRUCTIONS

Jagathesbabu

V P M PROJECTS