REPAIR/REPLACEMENT OF INTERNAL ELECTRIC WIRING, FITTING AND FIXTURES FOR MD AND OTM ACCN AT MIL STN SANGRUR.

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ complete all as specified and directed. in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for switch point control by 2 way switches, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M & L for Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through existing surface non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for all as specified and directed.

All as per item No 7 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 7 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 7 above, but for switch point control by 2 way switches, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 7 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 2 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W -AC 230 Volt Modular type all as specified and directed.

Supply & fixing modular white cover plate with frame for fixing of modular switches for 12 module, complete all as specified and directed.

All as per Serial item no 19 but of 8 module complete all as specified.

All as per Serial item no 19 but of 3 module complete all as specified.

All as per Serial item no 19 but of 1 module complete all as specified.

S& F blank spacer plate for single module, complete all as specified and directed.

Switch piano, flush type, 5 amps, 240 V single pole, one way all as specified.

Switch piano flush type single pole two way, 5 Amps fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring).

Supply and fix only Switch piano, flush type, 15 amps, 240 V single pole, one way all as specified

Socket outlet, 3 pin , 5 amps multipurpose, piano flush type, complete all as specified and directed.

S&F Socket out let flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 V all as specified & directed.

Bell push, flush type, 6 Amps , single pole, one way fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring).

Supply and Fix in replacement of electronic fan regulator stepped type, necessary connections with suitable copper cable including taking down of unserviceable existing all specified.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing for sub main wiring two single core FRLSH PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit of size not less than 25 mm in dia with 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring, and making good the disturbed suface, complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If necessary cutting / chasing and making good disturbed surfaces of wall, floors etc shall be deemed included in quoted rate.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job, complete all as specified and directed.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing t5 tubelight with G5 lamp holders to give glare free light with separate led driver of capacity 18W 865 1148mm LED including neccessary electric conection with batten .

Supply & fix in replacement of existing unserviceable batten with BOX TYPE Pre-coated CRCA body, heavy duty regaL Batten for LED tube universal batten for G13 t8 lamps including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size, complete all as specified and directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.

Supply & fix in replacement of existing unserviceable Vertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way VTPN, with MCCB of capacity 100 Amp FP as incomers and MCB's as out going with rated bus bar 200 Amp link 230 volt : i) Connnections of the MCCB's / MCB'S with cable shall be made through appropriate size of pin / bottle type copper thimble (properly crimpled). ii) The DB shall be flushed, fixed and the disturbed surface shall be made good as per exting surface and it is deemed included in quoted rate.

Supply and fix in replacement of MCCB TPN 40 Amp, 4 pole, 415 volts, 16 KA, complete all as specified and directed.

LED batten Tube light fitting 1 X 9 / 10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.5 Sqmm copper cable all as specified & directed after taking down old unserviceable tube light fitting of any description.

LED Bulk head luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket including LED 1x7 watts after taking down old unserviceable light fitting of any description.

S&F in replacement E-LITE LED Green tube light fitting, pre wired batten type 18 W, 230 V, 50 Hz, 6500K, complete all as specified and directed.

M&L G I tube 40mm dia with suitable clamps, nut, bolts, etc complete all as specified and directed.

Taking down ceiling fan of any type and refixing on the location as directed after cleaning, oiling, overhauling, greasing, replacement of rubber bush, quarter pin etc. including connection with three core flexible PVC conductor cable of size 23/0.0076, complete all as specified and directed.

m/s s.n. builders

R D Bansal

KUNAL ENTERPRISES

AR CONSTRUCTIONS

m/s panchmukhi builders

M/s Harmans