Public Health renovation work in Pre Nursery School and Creche in House No.75 and 76 in Police Line, Sector 26 Chandigarh.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: .4.2

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.2.3

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). .4.2.8

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level .5.1

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) .5.1.2

Centering and shuttering including strutting, propping etc. and removal of form for .5.9

Suspended floors, roofs, landings, balconies and access platform .5.9.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. .5.22

Cold twisted bars .5.22.3

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade , colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. .8.2

Granite stone slab of colour black, Cherry/Ruby red .8.2.2

Area of slab upto 0.50 sqm .8.2.2.1

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300mm x 600mm) .8.31

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), ransparent or dyed to required colour or shade, with nuts and screws etc. complete : .9.96

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.97

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: .10.14

Profile B .10.14.1

Fixing with adjustable lugs with split end tail to each jamb .10.14.1.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. .11.41

Size of Tile 600x600 mm .11.41.2

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. .15.2

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Floor area .15.2.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : .15.12

Of area 3 sq. metres and below .15.12.1

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. .15.6

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3

W.C. pan with ISI marked white solid plastic seat and lid .17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7

White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap .17.7.7

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: .17.1

Kitchen sink without drain board .17.10.2

610x460 mm bowl depth 200 mm .17.10.2.2

Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13

Orissa pattern W.C. pan of size 580x440 mm .17.13.2

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19

10 litre (full flush) capacity-white .17.19.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28

Flexible pipe .17.28.2

32 mm dia .17.28.2.1

Providing and fixing heel rest sanitary bend .17.4

100 mm dia .17.40.1

Sand cast iron S&S as per IS - 3989 .17.40.1.2

Providing and fixing collar : .17.57

Sand cast iron S&S as per IS - 3989 .17.57.1.2

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.6

100 mm inlet and 75 mm outlet .17.60.2

Sand cast iron S&S as per IS - 3989 .17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall .18.1

20 mm dia nominal bore .18.10.2

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : .18.11

15 mm dia nominal bore .18.11.1

Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : .18.17

20 mm nominal bore .18.17.1A

Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21

30 cm length .18.21.1

15 mm nominal bore .18.21.1.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46

15 mm diameter bore .18.46.1

20 mm diameter bore .18.46.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 .18.49

15 mm nominal bore .18.49.1

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. .18.52

15 mm nominal bore .18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53

15 mm diameter bore .18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. .18.62

20 mm nominal bore, 120 mm long, weighing not less than 198 gms .18.62.2

Cutting holes up to 30x30 cm in walls including making good the same: .18.76

With common burnt clay F.P.S. (non modular) bricks .18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. .18.77

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards. .NSR

15 mm nominal bore .

Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect .NSR

Providing and fixing CP Towel rail 600 mm complete in all respect as per entire satisfaction and approval of make by EIC. .NSR

Providing and fixing of CP brass revolving joint shower, CP cup with arm complete in all respect .NSR

Providing and fixing C.P. Soap dish holder complete in all respect as per entire satisfaction and approval of make by EIC. .NSR

Providing and fixing C.P Cup heavy duty .NSR

Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) .NSR

Providing and fixing of CP Brass towel ring complete at site for WHB as per approved make complete in all respect as per entire satisfaction and approval of make by EIC. .NSR

Providing and fixing SFRC Inspections chamber cover 600x600x35 mm thick made out of M.S angle iron size 35x35x5 mm and TMT bars 10mm i/d both sides including cutting welding and fixing with cement concrete 1:1/2:3 complete. .NSR

Providing and fixing of SFRC G.T cover 375x375x25 mm thick made out of M.S angle iron size 25x25x5 mm thick with fixing wire mash 1"x1" of 10 gauge including cutting welding and fixing with cement concrete 1:1/2:3 .NSR

Providing and fixing of tank nipple complete in all respect. .NSR

Providing and fixing 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete .NSR

Providing and fixing CP waste 32mm x 150mm long complete in all respect. .NSR

Providing and fixing PVC Pipe 4" (100mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect .NSR

Providing and fixing C.P long bend 32 MM complete in all respect .NSR

Providing and fixing of HCI P trap 4" dia complete in all respect. .NSR

Providing and fixing ISI marked water proof 30 mm thick flush door shutter of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core ,fungus resistant,eco friendly with 1mm thick lamination on both side with phenol formaldehyde resin conforming to IS:848,complete in all respect .NSR

Please Enable Macros to View BoQ information