CONSTRUCTION OF NEW KITCHEN CUM STORE ROOM FOR ICDS CENTERE NO- 366 AT BANIPUR- I GP ( BOOTH NO-176) WITHIN SANKRAIL DEVELOPMENT BLOCK. UNDER AMADER PARA AMDER SAMADHAN (APAS) -2025 FUND.(ID NO-APAS/01/174/176/0012) (PRIORITY SEQUENCE NO-12)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge.

Ordinary Cement concrete (mix 1 : 1.5 : 3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Brick work with 1st class bricks in cement mortar ( 1 : 6 ) In foundation and plinth

125 mm thick brick work (1:4) with cement sand mortar

Artificial stone in floor, dado, staircase etc with cement concrete ( 1 : 2 : 4 ) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). p-114/1

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floorp-117/1

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).( Excluding cost of chipping over concrete surface ). 20 mm. thick plaster, in ground floor

Appl;ying decorative cement paiint of approved quality after preparing the surface including scraping the same thoroughly

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel I. Other than SAIL/TATA/RINL.

Photo taking, fitting & fixing display board etc.

Including GST @ 18%

Including Cess @ 1%