Karnataka

To Be Opened

Works

Lift Irrigation Scheme

Rejuvenation of Kadlur Lift Irrigation Scheme in Raichur Taluka of Raichur District

Minor Irrigation Department

Minor Irrigation Division Koppal | KOPPAL, Karnataka

Amount: ₹2.0 CrCloses: 30 May 2026Closed

Timeline

Published17 May 2026
Pre-Bid Meeting22 May 2026
Closed30 May 2026
Bid Opening3 Jun 2026

Tender Value

₹2.0 Cr

EMD Value

₹3 L

Closing Date

30 May 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

BASAVARAJ S PATIL

Mobile Number

Work Description

Rejuvenation of Kadlur Lift Irrigation Scheme in Raichur Taluka of Raichur District

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT11141

Reference Number

MI/2025-26/LI/WORK_INDENT11141

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Koppal

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredContractor Registration Certificate

RequiredAnnual turnover certificate along with Balance sheetcertified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

RequiredWork done Certificate issued by competent authority not less than the rank of the Executive Engineer

RequiredDetails of existing commitments and on-going works as per standard bid document KW-1

RequiredLatest address and contact number for communication to be furnished

RequiredValid GST, ESI & EPF certifcate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The necessary Certifcates / documents in support of eligibility criteria fulflled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in the website for all modifications or corrections if any

The contractor should mention their recent correct postal address & mail address in declaration forms

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Department

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any

Typographical errors, if any, will not be the ground for any claims by the Contractor.

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification when demanded, otherwise the tender will be treated as non responsive bid and rejected

original certificate / documents shall be produced for verification when demanded, otherwise the tender will be treated as non responsive bid and rejected

Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

Incomplete tender documents will be rejected

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills.

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

The contractor should furnish the name of the individual / firm / company with address & telephone No with place of registration, year of incorporation etc

Original documents shall be produced for verification at the any stage of tender process, Failure to produce original documents will lead to disqualification. work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:01-04-2023

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill

The agencies participating in the tender shall be registered in the Construction Labor Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labors only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deem fit by the authority.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works.

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

The tenderer shall also disclose if there are any bankruptcy proceedings against him

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states).

Sub-Leasing/G.P.A of Work is Prohibited

Each Item Of BOQ To be read as with all lead and lifts and including loading and unloading charges and all other charges and as per the direction of Engineer in charge.

Uploaded drawings are for TENDER PURPOSE ONLY.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPPP Portal on or before the last date and time of bid submission

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled

All other terms and conditions as per KW-4 tender documents.

The tenderer has to quote his rate by excluding GST. However contract will be concluded for the AMOUNT (Exclusive of GST) but Applicable GST will be paid extra prevailing at the time of execution.If the GST rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment/recovery

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years (2021-22 to 2025-26) i.e. Executed in any one year the minimum quantities of work: 1) Earth work(Excavation, Embankment) etc1430.40 Cum, 2)RCC(M10 ABOVE)526.744 Cum 3) RCC STEEL 8.48 tonne

Work Done Certificate

Satisfactorily completion (at least 90% of the contract value), as Prime contractor, at least one similar nature of work such as CONSTRUCTION / IMPROVEMENTS / REJUVENATION TO LIFT IRRIGATION SCHEMES from Single Contract of value not less than Rs. 99.79 Lakhs during the last five years (2021-22 to 2025-26). (Workdone of previous years shall be given a weightage of 10% per year to bring them to the price level of FY 2026-27)

Work Done Certificate

Liquid assets and or availability of credit facilities of not less than Rs.81.30 Lakhs (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc

Line of Credit

Capabilities of Vendor

Contractor Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

List of existing commitments and ongoing works

Others -- certified vopy

Reports on the financial standing of the tenderer, Such as profit and loss statements and auditors reports for the last five year

Others -- certified vopy

Financial Status

EPF & ESI Registration Certificate & Previous month ESI Payment challan.

Others -- Valid ESI certificate Valid EPF Certificate GST Registration

Achieved in at least two financial years from last five (2021-22 to 2025-26) a minimum financial turnover (In all classes of Civil Engineering Construction works) of Rs. 399.16 Lakhs (Financial Turn over of previous years shall be given a weightage of 10% per year to bring them to the price level of FY2026-27).

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,990

EMD Fee Amount

₹3 L

Important Dates

Last Activity

17 May 2026

Published

17 May 2026

Bid Opening

3 Jun 2026

Download Ends

29 May 2026

Pre-Bid Meeting

22 May 2026

BOQ Preview

•

Rejuvenation of Kadlur Lift Irrigation Scheme in Raichur Taluka of Raichur District

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm central bulb type PVC water stop in single line supporte...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...

•

Available rubble stone/boulder filling between or behind abutment/below apron including cost of labour, hand packing, finishing top surface & all necessary works as directed and complete as per specif...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. -complete with all lead and lifts including loading and unloading and as pe...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

•

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. A) Upto 600 mm dia complete with all lead and lifts including loading and unloading and as per specif...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel raising main pipe of specified diameter and ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barri...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel w...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding jo...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding jo...

•

Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...

•

Providing and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP set ...

•

Supplying, installing, testing and commissioning ( SITC ) Cast steel double flanged dual plate Check valve Class 300 conforming to API 594 of approved make of specified diameter and to withstand speci...

•

Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make body and seat ring of bronze PN 1.0 conforming to IS: 14845 of specified diameter with all fixtures including cost of al...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe- 410 grade ) delivery pipes of specifie...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

•

Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangem...

•

Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder ...

•

Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed,galvanised,steel strip confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC oute...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

250 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor type with off load tap changer in steps ...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. complete with all lead and lifts including loading and unloading and as pe...

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing cohesive non-swelling ( CNS ) soil lining to canals using soil from borrow area including cost of all materials, labour, machinery, spreading soil in layers of thickness not more than 150 mm...

•

Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...

•

Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour, c...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

e_payment.doc

Sample Submission Guidelines • 0.19 MB

11141 FINAL.docx

Tender Document • 1.49 MB

detailed_specificatio.doc

Instructions to Tenderers • 0.61 MB

e_payment.doc

Instructions to Tenderers • 0.19 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Lift Irrigation Scheme

Rejuvenation of Kadlur Lift Irrigation Scheme in Raichur Taluka of Raichur District

Minor Irrigation Department

Minor Irrigation Division Koppal | KOPPAL, Karnataka

Amount: ₹2.0 CrCloses: 30 May 2026Closed

Timeline

Published17 May 2026
Pre-Bid Meeting22 May 2026
Closed30 May 2026
Bid Opening3 Jun 2026