Renovation of Main Building Including Wallpaper, Supply for Furniture, Garden Umbrella for unit B Type Qtr. Two Unit Staff Qtr. and Boundary Wall at Honble Chief Justice Residence Kanke Road, Ranchi for the Year-2021-22

Amount

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Taking down chowkhat in windows including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement concrete of specified grade1:3:6(1cement:3 coarse sand(zone-iii):6graded stone aggregate 40mm nominal

Providing and laying Double charge vitrified floor tiles in ,different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing with grey cement slurry@ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc.complete.size of tiles 600x600mm

Providing chequred precast concrete tiles 22mm thick in footpath coutyard jamted with cement slurry mined with pigment to match to shade of tiles including rubbing and cleaning etc complete 20mm thick bed of cement mortar(1:4)medium shed using 50% white cement &50% grey cement.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powdercoating 50 micron

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyesster powder coating50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Supplying of 4mm thick ACP approved quality including all complete job as per direction of E/I.

steel work welded in built up sections/framed work,including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings,frames,guard bar,ladder,railings,brackets ,gatesa and similar works.

Providing and fixing 1mm thick M.S.sheet door withframe of 40x40x6mm angle iron and 3mm M.S gusset plates allthe junction and corners,all necessaryfittings,complete including applying a priming coat of approved steelprimer using M.S.angle 40x40x6mm for diagonal braces.

Supplying, fitting and fixing 20 mm dia M.S. bar 1 meter long holding down bolt with nuts washers 100x100x6mm plate fitted and fixed with cement concrete (1:2:4) as per approved design all complete as per building specification and direction of E/l.

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Providing and Fixing factory made uPVC white colour sliding glzed window upto 1.5m in height dimension comprising of UPVC multi-chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanised steel section made from roll forming process of required length (shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazeing beads and UPVC extruded interlocks,EPDM gasket,wood pile,zinc alloy(white powder coataed)touch locks with hook,zinc alloy body with single nylon rollers(weight bearing capacity to be 40kg)G.I.fastyeners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc profile of frame & sash hall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealelnt over backer rod of required size and of approved quality,all completeas per approved drawing & direction of E/I.(single/double galss panes,wire mesh and silicon sealant shall be lpaid separately) Note_For UPVC frame and sash extruded profiles minus 5% tolerance indimension i.e.indepth & width of profile shall be acceptable.Three track three panels sliding windows with fly proof S.S.wire mesh( two nos,glazed & one no wire mesh panels ) made of (big series) frame 116x45mm& sash 46x62mm both having wall thickness of 2.3±0.2mm and single glazing bead/double glazing bead of appropriate dimension.(area of window above 1.75sqm)

Providing and Fixing factory made uPVC white colour sliding glzed window upto 1.5m in height dimension comprising of UPVC multi-chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanised steel section made from roll forming process of required length (shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazeing beads and UPVC extruded interlocks,EPDM gasket,wood pile,zinc alloy(white powder coataed)touch locks with hook,zinc alloy body with single nylon rollers(weight bearing capacity to be 40kg)G.I.fastyeners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc profile of frame & sash hall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealelnt over backer rod of required size and of approved quality,all completeas per approved drawing & direction of E/I.(single/double galss panes,wire mesh and silicon sealant shall be lpaid separately) Note_For UPVC frame and sash extruded profiles minus 5% tolerance indimension i.e.indepth & width of profile shall be acceptable.Three track three panels sliding windows with fly proof S.S.wire mesh( two nos,glazed & one no wire mesh panels ) made of (big series) frame 116x45mm& sash 46x62mm both having wall thickness of 2.3±0.2mm and single glazing bead/double glazing bead of appropriate dimension.(area of window above 1.75sqm)

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Providing and applying white cement based birla putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below. 1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand kpaper of 160/180nos 2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs 3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Supply of stainless steel wire guage (Grade 304) aperture 1.4mm and 0.50mm dia wire including all complete job as per direction of E/I.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing two coats of synthetic enamel paint over a coat of red oxidized paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l.

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for platforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels. Granite any colour,area of slab over 0.50sqmm

Providing and fixing Granite Stone of approved shadestone slab with table rubbed, edges rounded andpolished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embeddingthe stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)as per direction of Engineer-in-charge and finished smooth

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying rectified glazed ceramic wall tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed of cement mortar 1:4(1cement:4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and fixing Ist quality conforming to IS:15622 of (Thickness to be specifed by the manufacturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of c ement mortar 1:3(1cement:3COARSE SAND) AND JOINTING WITH GREY CEMENT SLURRY @ 3.3KG PER SQM INCLUDING POINTING IN WHITE KCEMENT MIXED WITH PIGMENT OF MATCHING KSHADE COMPLETE. job as per direction of E/I

Labour for fitting and fixing G.C.I, or C.A. sheet roofing in proper slope including the cost of "J" or "L" hooks, limpet and bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of E/l.

Supplying of Corrugated 6mm thick C.A.sheet ridge approved quality including all cost of taxes,roayalty,carriage etc complete job as per direction of E/I.

Labour for fitting and fixing G.C.I: or C.I. sheet ridge including the cost of "J" or "L" hooks, limpet and bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of E/l.

Supplying of C.A.sheet ridge vally 1M long(plain wing adjustable)approved quality including all cost of taxes,roayalty,carriage etc complete job as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 -160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete .The vital physical and chemical parameters of the membrane shall be asunder : Joint strength in longitudinal and transverse direction at 23°C as350/300 N/5 cm. Tear strength in longitudinal and transverse direction as60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane

Extra for covering top of membrane with Geotextile,120 gsm non woven,100% polyseter of thickness 1 to 1.25 mm bonded to the membrane wit6h intermittent touchby heating the membrane by Butane torchas per manufactures recommendation

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4(1cement :2coarse sand(zone-iii):4 graded stone aggregate

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: old work (two or more coats applied @ 1.67ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

local sand lead 3K.M

Stone Metal 20 km lead

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .

(a) 15 mm dia A) BRASS STOP COCK

Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.

(A) Horizontal non return valve (1)15 mm dia wt not less tham 150 gms

(2) 20 mm dia wt not less than 250 gms

(B) Vertical non return valve (2) 20 mm dia wt not less than 250 gms

(3) 25 mm dia wt not less than 375 gms

Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l

(A) C.P. SHOWER (d) 125 mm dia P.V.C shower

Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l.

(b) C.I. body brass spindle

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

(a) 20mm dia wt not less than 400 gms

(a) 25 mm dia wt not less than 500 gms

Cutting chajja or concrete for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

(a) Glass shelf with C.P brass rail 2) 450x125mm glass shelf complete

(b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror

(2) 450x300 mm size

( c) C.P brass towel rail 20 mm x 600 mm with bracket container

(2) C.P brass shop dish container medium quality with screw and hinges etc.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(a) 580mm longwith 10.0 lit. low level P.V.C. cistern

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Single Tee with door 75x75x75mm

Single Tee with out door 75x75x75mm

Bend 87’5 75mm dia

Providing and fixing stainless steel A ISI 304(18/8) kitchn sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever required(610x460x200mm)(big size)

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

15mm nominal outer dia pipes

20mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

20mm dianominal outer dia pipes

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Providing and fixingPTMT Grating of appoved quality and colour

C.P.Gratings circular type-125 mm dia

Providing & fixing of modular kitchen cup board 19mm thick BWP board of century ply on front top side with rack 1.5mm thick laminate laminated 2’0”x1’6”x0’9” steel rock hing bocket with teak wood beads and copping provision of all fitting of modular kitchen component such as shutters, channel rail ,nut bolts, hings glass all modular fitting all as pr building specification and direction of E/I Century mark ply & laminate,channel lock Handle and other fittings are hettich make, door closer Godrej & edge brinding with PVC all complete job(Including frame work of cocking plate form)

S/F/F upper head cabinet,Rack,or wall unit file cabinet including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1mm thick green Lam/century Lam, inside Laminate-0.8mm thick Green lam/century Lam channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC

Supplyinga fitting and fixing wall paper approved quality including all complete job as per direction of E/I.

Supplying and fixing vinyl flooring approved quality including all complete job as per direction of E/I.

Providing and fixing choukhatpaneeling with wooden framed by 12mm thick both side best quality ply and 4mm thick venner both side pasting finishing with all materials and labour all complete as per building specification and direction of E/I.

S/F/F Roller Blind-megatech Blackout roller blind megatech (Mega-850)-Product IS 5116877-52029198049 Opening style 1 Roll uup/Roll down.Mounting arrangement brackeet systems-toinstall functional roller blind mechanism,types of roller blind Blackout roller blind,shading solution single roller blind-utilise one layer of fabric(called outer layer),operating mechanism pull tab on the bottom of the fabric (provideds easy manipulation of the blinds without touching fabric) Roller blind fitting option outside mount(Arc fit)-that fits over the window frame.

S/F/F wooden visitor chair-NKSH(NKSVC 200)Product ID 5116877-5656179217,Type of material(other then wood) used in polythenc cane chair solid wood. Size of maatgerials 40mm teak wood ,chair Height ±15(mm) 1000nn seat Dept±10(mm)500mm seat width±10(mm) 470mm seat Height in mm ±5(mm)500 ,Backrest width±10(mm) 480mm,,Backrest Height ±10(mm) 500mm,Arm length ±5(mm)250 mm,Arm width ±2(mm)60 mm

S/F/F SAI Enterprise Newspapper and Magazine stand wrought Iron 1380mm and 1300mm tapered,Sai Enterpriser (sai enterprise),product id:5116877-20883675834 country of origin India,Local content (MII),100% Frame stand made up of Mild steel frame thickness 18SWG mild steel shelves made up of MS perforated sheet shelves thickness 19mm(commercial board) Tray mataerial 19mm commercial boarad Header boarad material 19mm commercial board including all complete job as per direction of E/I

S/F/F wooden Book Case- product id:5116877-31884736725,ISI Marked,three layer prelaminated particle Boarad conforming to Grade II Type III of IS 12823/2013 laminated with 0.6,0.8mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5mm thick on the back side ,Number of shelves(nos)5,Number od doors(nos)2,Height in mm(±10mm)1550,Depth inmm( ±5mm)450 mm widthin mm(±10mm)910 including all complete job as per direction of E/I.

S/F/F Sofa couch approved quality including all complete job as per building specification and direction of E/I.

S/F/F Podium approved quality including all complete job as per building specification and direction of E/I.

S/F/F side Table-Teak wood(Marble top) approved quality including all complete job as per building specification and direction of E/I.

S/F/F Teak Laung-chair with coushion approved quality including all complete job as per building specification and direction of E/I.

S/F/F Bed stud/Table approved quality including all complete job as per building specification and direction of E/I.

S/F/F Photo Frame -5'x4' approved quality including all complete job as per building specification and direction of E/I.

S/F/F cage as per building specification and direction of E/I

S/F/F Garden Umbrela for seating 7x8 with grante as per building specification and direction of E/I

S/F/F Garden Hut including repair and polish as per building specification and directionn of E/I

S/F/F Jhoola in Garden(Reinstallation) as per building specification and direction of E/I

S/F/F Digital Granite tool-16Pc Granite on top side as per building specification and direction of E/I.

S/F/F Digital Granite tool-1Pc Granite on top side as per building specification and direction of E/I.

S/F/F Wooden Tool as per building specification and direction of E/I.

S/F/F Bambu partition including painting in Garden area as per building specification and direction of E/I.

S/F/F Tower Bolt(Long size) as per building specification and direction of E/I.

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

BIRENDRA KUMAR PANDEY