REPAIR/REPLACEMENT OF SIGN BOARDS, OUTDOOR DECORATIVE LIGHTS, LT POLES AND ALLIED ITEMS AT GRID,BML,SUB STN NO 7,8,PCKT 7 AND NEW CANTT OFFICE AREA UNDER GE(N) PATIALA

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Supplying and fixing 100mm nominal bore Galvanised mild steel pipe /tubing, light grade for protection of earth lead / passing cable complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified of the following bore (Excavation & Earth work , Mild steel clamps, bolts , nuts and washers shall be measured and paid separately)

M&L burnt clay fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Material and labour for white river sand, unwashed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)

Site cleaning in soft/loose soil of surrounding areas of 2/4 poles plinth mounted transformer / E/M substation including removing of tree branches, plants, brushes etc. Complete all as specified.

S&F in repairs 3 core , stranded copper conductor cable 2.5 sqmm, PVC insulated and PVC sheathed , 1100 Volts grade for making connections to street light fittings complete all as specified and directed.

Dismantling and taking down of LT U/G cable of any size/type

Supply & Laying jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor cable of size 10 Sqmm, 4 core through pipes, induct, on poles, in trenches etc

S&F in repairs 3 Mtr Clear height Decorative Ornamental Pole duly PU (Poly Urethane) Painted (RAL color code as per client choice), made of high tensile Steel Pipe, Galvanised before PU Painting. Pole shall be in minimum 2 Sections, where Bottom section dia-114mm minimum upto 1200mm height from base plate. Top section dia-60mm minimum. The Top section of pole must have Cast Aluminium Embleshments throughout the length. Base Plate size 200x200x10mm with PCD of 200mm. Foundation bolts set of M16x450mmx 4 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitabe size should be provided at bottom section for termination and connection with provision of mounting backelite sheet and connector, MCB SP, 10 amps, 240 Volts , 10 KA, 'C' curve rating including RCC base etc. Similar to Bajaj Model No- BJPL ECO 3M PT Pole Note: Manufacturer should have their own manufacturing and galvanising plant ,the certificate for the same should be submitted by contractor prior to purchase. Poles and post top lights should be of same make Make: Bajaj,Havells,Phillips

S&F in repairs 45W 3000K Ring Type decorative Post Top Light, Pressure Cast aluminium PU Painted housing with casted aluminium heat sink, having Optical grade PC diffuser with Symmetrical arrangement of LED's. Suitable for upto Ø76mm OD pole.Light fixture should be protected by In-Built Surge protection of 4kV and External Surge protection of 10kV. Light should be rated with IP65 and IK08. Operating temperature range of light should be -10°C to +50°C. Make: BAJAJ (BGCPNP 45W LED WW- ARCHNER PLUS POST TOP),Havells,Phillips

S&F in repairs Triple head type decorative Post Top Light each of 20 watt 3000K with LED integrated lamp holder including tripple head mounting , Pressure Cast aluminium PU Painted housing with casted aluminium heat sink, having Optical grade PC diffuser with Symmetrical arrangement of LED's. Suitable for upto Ø76mm OD pole. Light fixture should be protected by In-Built Surge protection of 4kV and External Surge protection of 10kV. Light should be rated with IP65 and IK08. Operating temperature range of light should be -10°C to +50°C. Make: BAJAJ,Havells,Phillips

Supply of Decorative Laser Cut designed 15W Bollard Light of minimum Dimentions of 150mm x 150mm and of height 900mm having colour temp. of 3000K. Light should be made up of Graphite Grey Powder Coated MS Body in Rectangular design shaped emitting light through multiple number of designes cut using Laser technology. Logo / Name of MES to be engraved at the top of all 4 sides of light fixture using Laser cut Technology. Make: BAJAJ (MUSTER BOLLARD), Havells,Phillips

M&L for preparation of old painted surfaces of erected steel tubular swaged poles / Rails/Girder poles of LT over head line ( Except embedded portion) , 9 M long including all MS work mounted on pole , earth protection & water pipe ( if exists) and providing one coat of aluminium paint and providing 04 Nos bands/ straps with two coats of Retro Reflective paint ( black and red 30 cm wide each) from top of plinth block and numbering of poles with white Retro Reflective paint on yellow Retro Reflective piant ground (50mm wide and 100mm high letters) including encircling the letters or figures complete all as specified

Dismantling and taking down outdoor type bollard,fluorescent tube light single/double of any wattage or size compleate all as directed by engr-in-charge.

S&F FRP pole mounting type junction box factory made of size 300x200x105mm with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB SP 10 Amps, 'C' curve10 kA, suitable for domestic loading -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.(MCB shall not be measured and paid separately and shall deemed included in the unit rate)

Taking down of existing unserviceable MCB and S & F Miniature circuit breakers TPN, 32/40 Amps, 415 Volts , 10 KA, 'C' curve rating and to be housed in existing sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast RCC cover 40 mm thick in plain cement concrete 1:2:4 type B1 duly reinforced with 8mm dia TMT bars @ 150mm c/c with 10mm dia MS round bar as in lifting handles, mild steel angle iron frame for pit cover made out of 40x40x5mm thick duly painted with two coats of ssynthetic enamel paint over a coat of priner , excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 03 of SSR Part I

Dismantling of ACSR from overhead lines service feeder or distributor span

Supplying only aluminium conductor steel reinforced (ACSR) of any size for HT/LT poles

Supplying, transporting, erecting and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long)compleate all as directed by engr-in-charge.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregated as in foundation, filling and mass concrete using necessary form work complete all as directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregated as in foundation, filling and mass concrete using necessary form work complete all as directed by Engr-in-Charge.

All as per item srl No 01 but in depth beyond 1.5 Mtr and n. exc 3.00 Mtr and taking out in any type of soil.

Dismantling concrete poles/ struts, any size from ground after necessary excavation etc and removing including making good disturbed ground complete all as specified

Dismantling the existing unserviceable sign board and S & F sign board of size 6.1 x 1.2 meter with 8 inch lasure cut yellow colour letters having LED strip light emebbeded on board with blue base including suitable MS stand structure, 4 legs, nut bolt and washers mounted on ground,pillar,buildings with proper RCC base at power houses complete all as directed by engr-in-charge. NOTE:- Name on Boards as follow including MES logo and Ashok stambh on each corner :- (i) (MILITARY ENGINEER SRVICES GARRISON ENGINEER (N) PATIALA BML ELECTRIC SUB STATION) (ii) (MILITARY ENGINEER SRVICES GARRISON ENGINEER (N) PATIALA SUB STATION NO 7) (iii) (MILITARY ENGINEER SRVICES GARRISON ENGINEER (N) PATIALA SUB STATION NO 8) (iv) ((MILITARY ENGINEER SRVICES GARRISON ENGINEER (N) PATIALA SUB STATION PCKT NO 7) (v) (MILITARY ENGINEER SRVICES GARRISON ENGINEER (N) PATIALA SUB STATION NO 3) (vi) (MILITARY ENGINEER SRVICES ASSISSTANT GARRISON ENGINEER E/M (N) PATIALA NEW CANTT)

S&F 40 mm nominal bore GI pipe brackets made out of light grade pipe of required length not less than 1.20 M consisting adapter to suit the opening of street light on one end alongwith integrated fabricated adaptor round cup type with 4 Nos studs on outer side to fix the bracket on top of existing steel tubular pole four way with necessary MS clamps with one coat of red oxide and two coats of aluminium paint upon fabricated adopter including nuts, bolts and washers complete all as specified .

S&F LED Flood light 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant compleate with driver and lamp. Make:- Eveready,Bajaj,Havalls

R D Bansal (BID ID -3492593)

Mohinder Pal and Sons (BID ID -3491852)

AR CONSTRUCTIONS (BID ID -3497373)

ANIL KUMAR AND CO (BID ID -3498597)

Jawandha Enterprises (BID ID -3498673)

Arneja Builders (BID ID -3497248)