Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC ALIPURDUAR | ALIPURDUAR | WEST BENGAL | 735204 | L1 | Accepted-AOC DUE TO BEING L1 AND REASONABLE | |
| 2 | L2₹25.7 L+₹2.0 L (8.50%)Rejected-Finance | L2 | Rejected-Finance DUE TO NOT BEING L1 AND REASONABLE | |
| 3 | L3₹28.1 L+₹4.4 L (18.6%)Rejected-Finance | L3 | Rejected-Finance DUE TO NOT BEING L1 AND REASONABLE | |
| 4 | L4₹28.4 L+₹4.8 L (20.1%)Rejected-Finance BHARDA KALAN P O TEH AKHNOOR DISTT JAMMU J K | AKHNOOR | JAMMU | JAMMU AND KASHMIR | 181201 | L4 | Rejected-Finance DUE TO NOT BEING L1 AND REASONABLE | |
| 5 | L5₹32.6 L+₹8.9 L (37.6%)Rejected-Finance | L5 | Rejected-Finance DUE TO NOT BEING L1 AND REASONABLE |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) AKHNOOR
GE (SOUTH) AKHNOOR C/O 56APO
REPAIR TO SECURITY WALL, PATH ALONGWITH ALLIED WORKS NEAR DIV HQ AREA UNDER AGE B/R-I UNDER GE (SOUTH) AKHNOOR
2022_MES_572044_1
GES/AKH-61/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AKHNOOR
MES EN-LISTED CONTRACTOR WITH CLASS D AND ABOVE WITH CATEGORY a(i)
9 documents required · 9 mandatory
₹500
GE (SOUTH) AKHNOOR
₹80,000
9 Feb 2023
29 Dec 2022
28 Jan 2023
29 Dec 2022
26 Jan 2023
12 Jan 2023
Amount
Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-In-Charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed gound, posts embedded in concrete surface, complete all as specified.
Removing excavated materials/ soils, to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.
Plain cement concrete Nominal Mix M-7.5 (1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as in or as mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.
Plain cement concrete Nominal Mix M-10 (1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in fixing of angle iron fencing post , complete all as specified and as directed by Engineer-In-Charge.
Mild steel work in as flat iron fillets ( for securing chain link fencing) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-In-Charge.
S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing chain link fencing and wier mesh) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm long, dia of neck 16 to 20mm, complete all as specified and as directed by Engineer-In-Charge.
Supply only mild steel galvanized chain link fencing of any mesh, size and any type (as decided and approved by GE) complete all as specified and directed by Engineer in Charge. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly. BOO duly countersigned by GE shall be enclosed with final bill.
Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, round bars, straining bolts etc including provision of binding wire compete all as specified and directed by Engineer in Charge. Note : (i) Supply of chain link and line wire shall be measured and paid seperately. (ii) Whereever required the cost of Grubbing up bushes , tree trunks portion not exc 30CM girth including cutting of trees/bushes grown in over wall and roofs digging out roots and making good disturbed area with earth filling and levelling shall be deemed to be included in the quoed Unit Rates.
Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending in FE 410-W (Gde E-250) quality -A complete all as specified and directed by Engineer in Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-In-Charge.
Mild steel square bar framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed by Engineer-In-Charge.
Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.
Demolition of cement concrete (reinforced) in any position and of any description, including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in replacement precast cement concrete M-15 (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregates) as in louvres and jallies, 35mm thick (measured solid), including all mouldings including frame, set in cement mortar 1:4, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Mild steel galvanised concertina coil fencing with punched tape concertina coil 900 mm dia, 10 metre openable length (total length 142 mtrs), having 50 Nos. rounds per 6.0 metre length, spring core wire (2.5 mm dia galvanised wire) of high tensile strength not less than 400-450 gm/ Sqmm with tape (0.52mm thick) and weight 2.0 Kg/metre and fixing the same with existing Y-shaped angle iron placed 2.0mtrs apart and with 6 horizontal R.B.T. (Reinforced Barbed Tape) wire, stud tied with G.I. staple sand, 125 to 127 Nos. of G.I. clips in one coil, to retain horizontal, including necessary nuts and bolts, including taking down existing rusted/damaged concertina coil complete all as specified and as directed by Engineer-In-Charge.
Galvanised, 2-strand, steel barbed wire 2.24mm dia barbed with 2.0 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down existing rusted/damaged barbed wire, complete all as specified and as directed by Engineer-In-Charge.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed by Engineer-In-Charge.
Complete removal of existing treatment and Preparation of old plastered or unplastered surfaces of walls and applying two coats of acrylic smooth exterior paint of required shade @ 1.67KG/10SQM including exterior primer @ 2.20Kg/10SQM, complete all as specified and as directed by Engineer-In-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed by Engineer-In-Charge.
Rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed by Engineer-In-Charge.
M&L Cement concrete M-15, type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work, all as specified.
Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed by Engineer-In-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed by Engineer-In-Charge.
Machine pressed precast conctete interlocking paver block glossy finished any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over and including 30mm thick well rammed sand cushion laid over and including sub base of 100mm thick of plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate), with grey cement and no pigment, complete all as specified and as directed by Engineer-In-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required , complete all as specified and directed.
PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, laid in trenches/floors/fixed to walls fixed in repair, complete all as specified and as directed by Engineer-In-Charge.
PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed by Engineer-In-Charge.
M&L 100mm thick Moorum/red bajri filling in floors or pavings, filling at Road side berms conslidated to gradient and camber required incl surface dressing of berms or removing vegitation,spread, levelled and rammed including watering, complete all as specified and as directed by Engineer-In-Charge.
Plain cement concrete Nominal Mix (1:3:6) M-10, type C-2 (using 40mm graded crushed stone aggregate) in surface channels and drains, complete all as specified and as directed by Engineer-In-Charge.
Excavating in post holes (or imilar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified.
M&L for applying two coats of cement base paint over newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.
M&L for applying two coats of cement base paint over old plastered surfaces of walls including complete removal of existing treatment complete all as specified and directed.
Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coat of cement paint, complete all as specified and as directed by Engineer-In-Charge.
Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-In-Charge.
All as per Srl item No -36 but except bricks, complete all as specified and as directed by Engineer-In-Charge.
Chequered cement concrete coloured tiles size 300mmx300mmx20/25mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 laid over and including 75mm thick sub base of Nominal Mix PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate, complete all as specified and as directed by Engineer-In-Charge.
Dismantling fencing wire mesh, Chain Link Fencing of any type, all as specified.
Amount of Schedule of credit of for Rs 75,468.00 shall be deducted from quoted amount.
M/s Vishwakarma Enterprises
M/S Mahajan Construction Co.
JR CONSTRSTRUCTION CO.
M/s Rajesh Kumar Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .