REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION AND PETTY REPAIRS AT CESR A ENGR REGT PIONER UNITS AND ADJACENT AREA UNDER AGE EM II OF GE 865 EWS

Amount

Taking down carefuly copper / aluminium point wiring (Light, Fan, socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surcaces of walls, floors etc as directed by Engr-in-Charge.

M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth lead and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 2.00 here-in-before but 1.5 Sqmm for one 3 pin 6 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 2.00 here-in-before but 1.5 Sqmm for one 3 pin 6 Amps, 230 volts socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No 2.00 here-in-before but 1.5 Sqmm forone bell piont controlled by one bell push including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 2.00 here-in-before but 1.5 Sqmm for one 3 pin 15 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

S&F for ceiling rose, surface backlite three terminals complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch socket combination outlet 3 pin 6 Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch socket combination outlet multi purpose 5 pin 6 Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Switch socket combination outlet multi purpose 5 pin 15 Amps flush type 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular switch 1 way 10 Amps 230 volt,1 module complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular switch 1 way 16 Amps 230 volt,1 module complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular switch socket combination outlet multi purpose 2/3 pin 16 Amps 2 module flush type 230 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular switch socket combination outlet multi purpose 2/3 pin 6/16 Amps 2 module flush type 230 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement of electric bell (multi music type) AC, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement of electric bell push AC, 230 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular white cover plate with frame of 03 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular white cover plate with frame of 08 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular white cover plate with frame of 06 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of modular white cover plate with frame of 04 module suitable for 5 pin 6 Amps and 16 Amps 230 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement of lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

S&F in replacement of Lamp LED 9 Watt, 230 volt, 50 Hz, AC complete all as specified and directed by Engr-in-Charge.

Sub main wiring in replacement with two run of 6.00 Sqmm (2x6 sqmm) single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

Sub main wiring in replacement with two run of 4.00 Sqmm (2x4 sqmm) single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 4.00 Sqmm (1x4sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2x4sqmm), one run of 4 Sqmm (1x4 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

Sub main wiring in replacement with two run of 2.50 Sqmm (2x2.50 sqmm) single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 2.50 Sqmm (1x2.5sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.50 Sqmm (2x2.50sqmm), one run of 2.50 Sqmm (1x2.50 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in replacement of MCB SPN 5 to 32 Amps, 'C' series, 230 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: As per PS.

S&F in replacement of MCB SPN 40 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: As per PS.

S&F in replacement of MCB SPN 63 Amps, 'C' series, 240 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: As per PS.

S&F in replacement of MCB single pole and neutral 5 to 32 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement of MCB single pole and neutral 40 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement of MCB single pole and neutral 63 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv MCB Triple Pole and Neutral 415 Volts 63 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv MCB Four Pole 415 Volts 100 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement of MCB distribution board Double door, single pole, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 Amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: As per PS.

S&F in replacement of MCB distribution board Double door, regal grey, single pole, sheet metal enclosure, SPN 240 volts 12 way with 200 Amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: As per PS.

S&F in replacement of MCB distribution board Double door, single pole, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 Amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make: As per PS.

S&F in replacement of old unsv MCB DB double door 4 way TPN with suitable Amp rated busbar 415 V complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv Gang box 2 in 1, 5 Pin 5/15 Amp flush type complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old unsv Gang box 3 Pin 5 Amp flush type universal complete all as specified and directed by Engr-in-Charge.

Repairing and rewinding of burnt windings of Exhaust fans of size up to 450 mm size including dismantling from location and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling completely. (Spare parts replaced will be measured &paid seperately)

Supply and fixing in replacement of Flexible twin twisted copper wire two core of size 23/0.0076mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Ball bearing suitable for Exhaust fan up 450 mm sweep any make complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Condensor 2.5 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Condensor 4 MFD 230 V suitable for Exhaust fan of any sweep/size complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in replacement Gun metal Bushings suitable for Exhaust fan fan up to 450 mm sweep any make .complete all as specified and directed by Engr-in-Charge.

S&F replacement of louvers made out of metal sheets suitable for up to 450 mm sweep exhaust fanscomplete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of old U/S decorative durable LED batten fitting of any capacity , 4 feet long 20 Watt with decorative and caps, powder coated CRCA decorative for LED tube of any capacity, 4 feet long 20 Watt (white colour) tube having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge.

Supply & fixing in replacement of old U/S LED Mirror light fitting of any capacity and type 230 volts box type, 9 Watt with standard specification etc complete withh all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

Supply & fixing in replacement of LED Bulk head luminaire of any capacity 6.5 Watts with all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

S&F in replacement of LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make : As per PS.

S&F in replacement of old UNSV 1'x1' Recess mounting low depth warm LED Luminaires white powder coated CRCA sheet housing LEDs front frame with translucent cover fixed to the housing fixed in front frame 24 Watt LED extruded alluminium heat sink projected in false ceiling . Make-BAJAJ /Philips/Wipro/Crompton/Syska)

S&F LED decorative gate light made up of high grade unbrakable polycarbonate material suitable for retro fit LED Lamp base (Post top lamp) including other connected accessories for fitting in existing base/pole etc and elecrical connection complete all as specified and directed by Engr in Charge.

S&F 1100 V gde heavy duty cable pvc insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 4.0 sqmm complete all as specified and directed by Engr-in-Charge

S&F 1100 V gde heavy duty cable pvc insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 6.0 sqmm complete all as specified and directed by Engr-in-Charge

S&F 1100 V gde heavy duty cable pvc insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size10.0 sqmm complete all as specified and directed by Engr-in-Charge

S&F in replacement of old unsv Single core copper conductor of size 1.5 Sqmm (FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 2.5 Sqmm (FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 4 Sqmm(FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 6.0 Sqmm(FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of plug top 3 pin of capacity 5/6 Amp complete all as specified and directed by Engr in Charge.

S&F in replacement of plug top 3 pin of capacity 15/16 Amp complete all as specified and directed by Engr in Charge.

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 24 Watts complete all as specified and directed.

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 36 Watts complete all as specified and directed.

Material and labour for earthing in replacement complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

R B TRADERS

Rampal Singh Contractor

Ms Salaria Builders

M/S ZTECH

osho traders

SONAM ANGCHOK