Repairs to 02 cusec discharge, 45 mtr. head pump motor unit-III installed at LIS Zanihal along with allied works.

Repairs to 02 cusec discharge, 45 mtr. head pump motor unit-III installed at LIS Zanihal along with allied works.

Dismantling the 60 HP motor from base frame after decoupling it from pump of 2 cusec discharge and then dismantling the pump from base frame of unit-III at LIS Zanihal. Carriage of pump to road side using tools and tackles with the help of manual labour passing through nallah and hilly terrain (Approximately 800 mtrs.). Loading in mechanical transport for shifting to workshop for repair and carriage back to lift station in the same manner after conducting necessary repair. The job includes cost of manual labour, hire charges of tools and tackles, carriage charges through head load and mechanical transport (to & fro).Repairs to 02 cusec discharge 45 mtrs. head pump at workshop by way of dismantling it for extraction of old damaged and worn out parts i.e. bearings, sleeves, chuck nut, gland packing, gasket, gland bushes, pump shaft, impeller. Repair to impeller by way of brazing, turning and finishing to size, also fitting of new pump shaft of stainless steel by way of turning, machining, threading & finishing to the required size as per sample. P/F of Gland bush-01 no. Chuck nut-02 nos. bearings, and sleeves. Re-assembling all parts of pump with proper greasing and suitable gland packing, oil paper, nuts and bolts. Fabrication of new gland set and P/F of new coupling as per sample. Job includes cost of material, labour charges, installation and testing on full load condition at LIS Zanihal. Dismantling of the damaged 60 HP motor at workshop for repairs to rotor by way of rebuilding, turning of the rotor shaft and finishing to bearing size, making new keyway for coupling, p/f of new bearings as per sample and sleeves (DE & NDE). P/F of bearing end cover plate 01 no. Complete greasing of the bearings and assembling the rotor and stator. Complete job includes cost of material and labour charges. Repair to delivery pipe line of unit-III by way of providing and fitting of new flanges of suitable dia., on both sides along with new set of nuts and bolts for making connections along with repair to rising main manifold by means of welding / cutting at site as per requirement and providing of necessary supports to rising main by way of making concrete structure at 02 different location along the length of rising main.Repair of electrical systems including repairs to the damaged electrical wiring and other allied works at LIS Zanihal by way of extraction of old damaged point wiring along with burnt switch socket etc and providing of new point wiring with 01 sq mm copper cable for light / socket points approximately 08 nos. inside and outside pump room building in casing / capping of surface conduit. The job also includes providing and fitting of switch board, switches, sockets, holders, back sheets, LED bulbs and other fittings required for the purpose. Providing & fitting of 01 sq mm copper wire enclosed in a casing-capping / PVC conduit, along with providing / fitting of bulb holder- 06 nos., switches, sockets, LED bulbs- 06 nos., switch board and 01 no. led flood light of 50 watt standard make along with support stand for safety of workers and taking the service connection from nearby pole / panel by using service cable of 1/1.5 sq mm size of length 20 meters each making the station work smoothly at night. Job includes fastening of cables by using plastic clamps, drilling holes in the walls for crossing of the cable and other works required for execution of the job.Complete job includes cost of material, transportation, head load carriage, labour charges and testing on full load. Note:- The rates are inclusive of all taxes and the bidders are advised to visit the site and quote the rates and suitable rebate on old parts. Any modification/alternation if needed at the time of execution of job shall be carried out at site accordingly.

Rebate on Old Parts

M/S FASTTRACK ENGINEERS (BID ID -2207438)

Rishabh Electricals and Mechanical Works (BID ID -2207600)