Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹20.8 L+₹2,756.60 (0.13%)Rejected-Finance 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹21.3 L+₹47,434.65 (2.28%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹21.5 L+₹70,078.25 (3.37%)Rejected-Finance 245A 7A 1 JAYANTIPUR GOKUL AVAS YOJANA SULEM SARAI ALLAHABAD PRAYAGRAJ | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211011 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹25.1 L+₹4.4 L (20.9%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF BAMRAULI
HQ CWE AF BAMRAULI ALLAHABAD-211012
PROVISION OF CERTAIN WORKS SERVICES IN ACCN IN TOM MESS AT AF STATION BAMRAULI
2022_MES_528047_1
87193/C/E8
Open Tender
Civil Works
Item Rate
182 days
Bamrauli
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹48,000
Yes
24 Sept 2022
9 Jun 2022
3 Aug 2022
9 Jun 2022
27 Jul 2022
1 Jul 2022
Amount
Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm thick in soft/loose soil.
Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point.
Provide, plain cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in mass concrete, sub base and foundation etc complete all as specified and directed.
Providing Plain, cement concrete 1:2:4, type B1 (using 20mm graded crushed store aggregate) in copings, and the like including weathering, slightly rounded or chamered angles and throating, including necessary form work complete all as specified and directed.
Material and labour provide Reinforced cement concrete nominal mix, 1:1½ :3 type A-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note :- Reinforcement as required shall be measured and paid for separately under respective item of this schedule.
Material and labour provide 35mm thick precast cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) louvres and jallies, (measured solid), including all mouldings and frame complete all as specified and directed.
Material and labour Brick work with sub-class 'B' bricks (old size) straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:6) complete all as specified and directed.
Material and labour brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar (1:4) complete all as specified and directed.
Material and labour for fair cutting exc 10cm width or girth on exposed surfaces of brickwork as to fire place apertures, splayed angles, weathering, cornices, groins, etc. including rubbed finish complete all as specified and directed.
Material and labour form work formwork to chullah hoods, cha jjas, troughs and similar items in cluding edge complete all as specified and directed.
Taking down wooden Windows/Doors chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) including making good for fixing new frame. Note :- (i) Old shutters, frame guard bars etc shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor payment. (ii) Quoted rate shall deem to be included cost of making good jambs portion.
Taking down wooden Windows/Doors chowkats or frames exc not exc 1.5 sqm each (without taking off shutters from the frames) including making good for fixing new frame. Note :- (i) Old shutters, frame guard bars etc shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor payment. (ii) Quoted rate shall deem to be included cost of making good jambs portion.
Taking down wooden shutters of area exc 1.0 sqm but not exc 2 sqm each complete all as specified and dierected. Note :- (i) Old shutters, shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor payment.
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC (wood finish) ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing of MES SSR Part-II complete all as specified and directed. Note :-Frame for fixing shutter, hinges, builder hard ware shall be measured and paid for separately under repective item of this schedule.
Supply and fix 35mm thick second class hard wood (Bansum/Hollock/Sal) glazed & skeleton door shutters open rebated and prepared to receive glass/gauge etc. plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc edges of framing divided into squares with plain chamfered rounded, mitered and rebated sash bars, edges of framing The size of stiles and rails of shutter shall be maximum size specified in SSR Part I, section 8 clause 8.20 (a). Note :- (i) Quoted rates deem to be included cost of wooden beading to fix glass/wire gauge panes. (ii) Glass panes/wire gauge, builder hardware shall be measured and paid for separately at supply only.
Supply and fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc including teak wood beading on all edges. Note :- Thickness of beading for hinge sides shall be 25 mm and on other three edges 6mm thick. (ii) Builder hardware shall be measured and paid for separately at supply only.
Supply only Aluminium, anodised, barrel tower bolts of extruded section size 200 mm long complete all as specified and directed.
Supply and fix in repairs aluminium, anodised, barrel tower bolts of extruded section size 200 mm long complete all as specified and directed.
Supply and fix in repair aluminium, anodised, barrel tower bolts of extruded section size 150 mm long complete all as specified and directed.
Supply only 150 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.
Supply and fix in repair 150 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.
Supply only 300 mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply only 100mm size mild steel butt hinges with mild steel medium weight cold rolled complete all as specified and directed.
Supply only Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn spring, (overall length of cover plate) 140mm complete all as specified and directed.
Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn spring, (overall length of cover plate) 140mm complete all as specified and directed.
Supply and fix 300mm, long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fix in repair mild steel wardrobe hooks 150 - 200 mm long complete all as specified and directed.
Supply and fix 2 lever wardrobe lock, vertical type of 50 mm size complete all as specified and directed.
Supply and fix fancy type door seal / bead in repair of size 30 mm wide 2 mm thick aluminimum strip with holding arrangements of 10 mm wide strip of fibre brushes for door cill etc complete all as specified and directed.
Supply and fix in repair 17-19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including piano hinges, stainless steel handle, drawer knob and steel screw including fancy type stainless steel handles of suitable sizes complete all as specified and directed.
Supply and fix in repair 12 mm thick particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame medium density flat pressed complete all as specified and directed.
Supply and fix in repair 17-19 mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including piano hinges, stainless steel handle, drawer knob and steel screw including fancy type stainless steel handles of suitable sizes complete all as specified and directed.
Supply and fix in repair 12 mm thick prelaminated MDF board, medimum density, flat pressed, fixed with screws to timber frame work including piano hinges, stainless steel handle, drawer knob and steel screw including fancy type stainless steel handles of suitable sizes complete all as specified and directed.
Supply and fix drapery rod 19 mm inner dia (wall thickness not les than 1.6mm) stainless steel fancy type with grade of SS-304 and chromimum plated finish bracket fixed with rawl plug or screw on walls/beam and shall be provided with fency finial at ends as approved by Garrison Engineer complete all as specified and directed.
Supply and fix Stainless steel (S-306 grade) wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in as repairs and fixed with stainless steel wire stapples to aluminium frame.
Supply only Stainless steel (S-306 grade) wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in as repairs and fixed with stainless steel wire stapples to aluminium frame.
Material and labour mild steel TMT bars 10 mm dia, and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking, ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Material and labour Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
Material and labour mild steel framed work such as grills, grating etc with ends of bars shoulded, framed guard bars and similar work conforming to Fe-290 Gde E-165 fixed to frame with screws complete all as specified and directed.
Material and labour pressed steel frames of size 125 x 60 mm and 1.25 mm rhick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified and directed.
Material and labour pressed steel framesof size 105 x 60 mm and 1.25 mm rhick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified and directed.
Supply and fix Solid PVC door frame size 50mm x 47mm made out of 5mm plain colour (wood grain finish) PVC sheet reinforced with M S square tube as per specification & drawing on page No. 160 of MES SSR Part-I complete all as specified and directed.
Supply and fix steel window with side hung shutter with box type hinges, steel peg stay, lugs, steel handles, with glazing bars dovetailed or welded complete including one shop coat of red oxide primer complete all as specified and directed.
Supply and fix factory made steel ventilator with top hinge shutter including hinges, steel pag stay complete including one shop coat of red oxide primer complete all as specified and directed.
Supply and fix aluminium (powder coated) frame for doors with one or more rebates including necessary joining cleats, fastner etc to fix in existing opening complete Notes : (i) Thickness of powder coating (epoxy polyster) shall not be less than 50 micron. (ii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iii) Gaps between frame and masonary to be filled with silicon gel for water tightness. (iv) Rates quoted includes making good of jambs, soffits and cills etc. (v) Aluminium section shall be as per drg No. CE/ALD/TD-224 sheet No 1/1 for doors. However size of frame as per actual site requirement.
Supply and fix powder coated (thickness of powder coatibng not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified.
Material and labour aluminimum Aluminium anodised (epoxy powder coated) grill fixing with aluminium rail of channels 12-15mm complete all as specified and directed. Note :- (i) Shade/tint of powder coating shall be as approved by GE.
Material and labour 450mmX350mm X 7-8 mm thick glazed ceramic coloured tiles in vertical surfaces such as skirting, dado, etc set & jointed in neat cement slurry and pointed in white or colured cement to match over & including 10 mm thick backing coat in cement and sand mortar (1:4) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of backing coat.
Material and labour 300mmx300mm x 7-8 mm thick non skid coloured ceramic tiles in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement and sand mortar (1:4) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.
Supply and fix non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqmm and not exceeding 0.38 sqmm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over joint free and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.
Supply and fix non skid coloured, stain and scratch free GVT tiles 8-10 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqmm and not exceeding 0.38 sqmm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over joint free and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.
Material and labour 20-25mm thick machine cut kota stone slab size (550x550mm) in flooring mirror polished, set and jointed in neat cement slurry, pointed with grey cement slurry mixed with pigment to match the shade of the slab complete including rubbing and mirror polishing over and including 20mm thick cement and sand mortar (1:6) bedding layer including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and cement slurry shall be applied over existing concrete surface for bonding with new one as specified in MES SSR Part-I complete all as specified and directed. Note:- (i) Quoted rate shall deem to included cost of bedding layer, cement slurry, and roughening surfaces of old concrete floor.
Material and labour Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.
Material and labour granite (telephone black) 20mm thick machine cut, (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including15mm thick screed bed or bedding layer in cement mortar (1:4) over over existing RCC slab work in cooking platform steps etc including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed. Note :- (i) Quoted rate shall deem to be inlcude cost of cement bedding. (ii) Exposed edge of slab shall be rounded, bevelled, chamfered and cost of same be included in the quoted rate. (iii) Slab shall be single piece in width and length of platform.
Dismantling, floor, hearth or wall tiling including cement mortar bedding etc including preparation of surface to received new floor finish/wall tiles and removing rubbish outside MOD land.
Material and labour 10 mm thick rendering in cement and sand mortar (1:3) on fair faces of brick work or concrete surfaces on ceiling finished even and fair complete all as specified and directed.
Material and labour 15 mm thick rendering in cement and sand mortar (1:6) on fair faces of brick work surfaces finished even and fair complete all as specified and directed.
Material and labour 15 mm thick rendering in cement and sand mortar (1:4) on fair faces of brick work surfaces finished even and fair complete all as specified and directed.
Taking down cement plaster on brick walls, etc, including raking out joints, hacking for key, scrubbing down with water etc & prepare surface to receive new plaster complete all as specified and directed.
Material and labour preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
Material and labour complete removal of existing treatment from old wall surfaces and applying two coat of exterior emulsion paint over a coat of primer with 1.5 mm thick wall care putty complete complete all as specified and directed.
Material and labour complete removal of existing treatment from wall and applying two coat of oil emulsion distemper over a thin layer of 1.5 mm thick wall care putty complete all as specified and directed.
Material and labour preparing new plastered surfaces of wall and applying two coat of cement base paint over over a coat of primer complete all as specified and directed.
Material and labour preparing new plastered surfaces of wall and applying two coat of oil emulsion distemper over over a thin layer of 1.5 mm thick wall care putty complete all as specified and directed.
Material and labour preparing old decorated surfaces of wall with washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as specified and directed.
Supply and fix 4.8 mm thick sheet glass, ordinary quality in square not exceeding 0.5 square metre each pane complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality in square not exceeding 0.5 square metre each pane complete all as specified and directed.
Supply and fix in repair 3 mm thick sheet glass, ordinary quality in square not exceeding 0.5 square metre each pane glazing with oil putty including hacking out old glass pane complete all as specified and directed.
Material and labour preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for preparation old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour Preparing old treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fix 15mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings or laid in floors etc and testing. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.
Supply and fix 20mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings etc and testing. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.
Taking down 15mm bore GI tubing and connection fixture etc from wall complete. Note :- Old retrived pipes, fittings, taps, valve etc shall be contractor property and necessary amount as schedule of credit shall be deducted from the contractor due payment.
Taking down 20mm bore GI tubing and connection fixture etc from wall complete. Note :- Old retrieved pipes, fittings, taps, valve etc shall be contractor property and necessary amount as schedule of credit shall be deducted from the contractor due payment.
Supply and fix in repair soap dish chromimum plated brass fixed with brass nuts as in repair complete all as specified and directed.
Supply and fix in repair PVC (SWR) multi floor / nanhi trap, 75mm outlet dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed.and bedded in PCC 1:2:4 type B-1 complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor or fixed to wall. Note :- (i) Fitting such as bend, tee and cowl shall be measured and paid for separtely as supply only. (ii) Excavation and earth work shall be measured as paid for separately under respective item of this schedule.
Supply and fix 15mm bore stop valve cast copper alloy, fancy type, with long shank and cup (concealed type) chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends (externally threaded) for iron pipe or for unions and fixed.
Supply and fix 15mm bore angle stop valve cast copper alloy, fancy type, with long shank and cup (concealed type) chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends (externally threaded) for iron pipe or for unions and fixed.
Supply and fix PTMT grating doom of size 100 mm / 110 mm dia for trap complete all as specified and directed. Make :- Prayag Cat No 111 or equilavent make of Shakti / Polytuf
Supply and fix in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.
Supply and fix in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.
Supply and fix in repair vitreous china wash down water closet one peace (Pedestal Pattern) (ivory) including PVC seat cover, flushing cistern , flushing pipe, toilet paper holder, health faucet, 15 mm bore CP brass bib tap (two way) PVC braided connection, angular stop cock (valve) with flange P or S trap etc complete all as specified and directed.
Supply and fix in repair counter top ceramic wash hand basin vessel sink of minimum size 550mm x 330mm, white scratch proof excluding taps, waste chain, 32 mm dia PVC waste pipe of suitable length, 32mm bore chromium plated brass waste fitting, PVC braided connection, CP coupling, CP bottle trap etc complete all as specified and directed. Make :- Hindaware / Jaguar / Cera
Supply and fix in repair corner glossy glass self with heavy bracket fixed with SS screw in wall complete all as specified and directed.
Supply and fix fancy type mixer pillar / sink mixer tap hot / cold (swan neck type) of 15 mm dia size connecting legs and wall flanges with screwed down high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make :- Hindaware / Jaguar / Cera
Supply and fix in repair two way fancy type mixer pillar / sink mixer tap hot / cold with regular swinging spout with connecting legs and flanges of 15 mm dia size connecting legs with screwed down high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make - Jaguar cat part No QQP7309PM or equivalent make of Hindaware / Cera
Supply and fix in repairs perforated chromium plated brass shower rose with swivel joints, heavy pattern 120mm size round single flow ABS with grey face plateong brass chromium plated extension rod (fancy type) suitable for 15mm bore inlet complete all as specified and directed. Note :- Shower rose cat part No OHS-1989 of Jaguar or equivalent model of Hindaware / Cera
Supply and fix in repair 600mmx 900mm and 6mm thick bevelled edge looking mirror mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete.
Supply and fix in repair tubular towel rail 20 mm dia 600mm long chromimum plated fixed to wall with chromium plated stainless steel screws of grade IS - 202 and PVC sleeves complete.
Supply and fix in repair towel ring 200 mm dia of chromimum plated fixed to wall with chromium plated stainless steel screws of grade IS - 202 and PVC sleeves complete.
Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed multistranded copper conductor FRLS Cables as earth wire connected to earth dolly incl metal junction box, grid plate and base plate suitable for switches, sockets and switch for one light point /fan point/exhaust fan / calling bell controlled by one switch. Note : (i) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (ii) Switches, sockets, etc shall be measured and paid for separately.
Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed copper conductor earth wire connected to earth dolly suitable for bell push for one bell/buzzer point controlled by one switch on independent board. Note :-(i) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (ii) Switches, sockets, etc shall be measured and paid for separately under respective item of this schedule.
Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed copper conductor earth wire connected to earth dolly including metal junction box, grid plate and base plate suitable for 3 pin 5 Amp sockets for one sockets outlet on same board controller by one switch. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscreasing of the service fitting and fixture as directed and kept in safe custody for refixing i.e like fans, regulator, geysers, light fitting, DBs etc if not specified in this item of schedule. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (v) Switches, sockets, etc shall be measured and paid for separately.
Material and labour point wiring with PVC insulated, unsheathed single core, nominal area 4 sqm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 4 sqmm unsheathed copper conductor earth wire connected to earth dolly including metal junction box, grid plate and base plate suitable for modular switch, socket for one sockets outlet on independent board controller by one switch 15/16 Amps. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscreasing of the service fitting and fixture as directed and kept in safe custody for refixing i.e like fans, regulator, geysers, light fitting, DBs etc if not specified in this item of schedule. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) The cost of chases cutting on wall for concealing conduit, metal boxes, grid plate and base plate quoted rated are included in the unit. (v) Switches, sockets, etc shall be measured and paid for separately.
Supply and fix Switch modular flush 6 A single pole one way (one module)
Supply and fix Ceiling rose, surface bakelite, 60 x 25, mm three terminals.
Supply and fix socket 2 in 1, 16 Amp, 5 pin combined flush type (two module).
Supply and fix modular socket 6 Amp, 2 in 1, 2/3 Pin flush type ( two module).
Supply and fix Switch modular flush, 15/16 Amp, single pole, one way.
Supply and fix steped type electronic fan regulator modular type and connecting up. regulator shall be of make as specified in appendix 'B' to particular specifications.
Supply and fix power unit consisting of one 240 volt 25 Amp rating 10KA, one 25 Amp socket and one 25 Amp plug top prewired complete all as specified and directed.
Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.
Supply, fixing in and connecting wall mounted LED light fitting 1 x 20 Watt LED (6000K/6500K) (1200/1144mm) extruded aluminium heat sink provided for efficeint heat dissipation intergrated electronic driver including necessary electric connection complete all as specified and directed.
Supply, fixing and connecting wall mounted LED light fitting 2 feet long 10 Watt LED (6000K/6500K) (1200/1144mm) extruded aluminium heat sink provided for efficeint heat dissipation intergrated electronic driver including necessary electric connection including taking down old fittings complete all as specified and directed.
Supply, fix decorative LED fitting wall mounted with LED lamp opal glass shade esthatic look with premimum synthetic and metal combination including 10 watt LED bulb including connection complete all as specified and directed. Make :- Philips / Bajaj / CG
Supply and fix of exhaust fan steel body 300/308mm sweep, heavy duty, four blade, double ball bearing 1400 RPM minimum air delivery discharge 6120 CMH suitable for SP, 230/250 volts, 50Hz, AC supply with louver shulter complete making of hole for exhaust opening, grouting nut, bolts and connecting with and including 3 run 1.5 sqmm single core, PVC insulated but unsheathed FRLS multistranded copper conductor cable from ceiling rose to fan and making good the disturbed surface with existing matching schedule of finishes complete.
Demolition of brick masonry quions, arches, pillars etc, but excluding ashlar fackings, dressed stonewrk and precast concrete articles. Note : (i) Material retrieved under this item is contractor property and necessary amount as per schedule of credit shall be deducted from the contractor dues. (ii) Rubbish shall be removed out site MOD land.
Pleiad Complex On
M/s M A Traders
R.K.ASSOCIATES
GITANSH CONSTRUCTION CO.
Abhinav Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .