Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹20.2 LAccepted-AOC MAGADH COLONY ROAD NO 5 GAYA BIHAR PIN 823001 | GAYA | BIHAR | 823001 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹21.5 L+₹77,085 (3.72%)Rejected-Finance WZ 484 M S BLOCK HARI NAGAR NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹24.5 L+₹3.7 L (18.0%)Rejected-Finance EAST DIGHI TANK OLD LIC COMPOUND GAYA BIHAR 823001 | GAYA | BIHAR | 823001 | 3 | Rejected-Finance NOT LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823001
Repair /Maint to Joinery and Certain other works at Zone A at Mil Stn Gaya
2022_MES_521285_1
8011/GE/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GAYA
₹40,000
Yes
8 Jul 2022
30 Apr 2022
28 May 2022
30 Apr 2022
27 May 2022
14 May 2022
60 days
Amount
Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each
Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each
Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqm each
M&L for 35mm thick IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I)2001 ,complete all as specified and directed.
M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.
M&L for 35 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete.
S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work in cup board and pelmet boxes etc omplete all as specified and directed.
S&F 5 mm thick and 18/19 mm width 2nd class hard wood decorative edging/beading on exposed to view on sides & top complete complete all as specified and directed.
S&F 30-35 mm wide rubber door bottom sealing strip decorative type and fixed to bottom of door complete complete all as specified and directed.
S&F 100 mm long Stainless steel butt hinges with steel hinge pin etc.
S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed
S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed
S&F 150mm long aluminium anodised handle cast type and fixed D Type
S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.
S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed
S&F 75 mm long butt hinges medium weight cold rolled mild steel and fixed
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple (to be fixed upto four storey of bldgs) complete.
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple (to be fixed upto four storey of bldgs) complete.
S & F framed work such as grills, gratings and hold fasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 (Gde-E-165)
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs)
M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.
M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.
M & L for anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling all as specified
S&F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engr-in-Charge
S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete, all as specified.
M&L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.
Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed
M & L for preparation of newly plastered surfaces of walls and applying two coat of distemper complete.
MS HARI MOHAN GUPTA
M/s Vinay Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .