COMPREHENSIVE REPAIR MAINT OF OTM MD ACCN TO BLDGS LOCATED IN ZONE F AREA OF AGE BR II UNDER GE EAST LUCKNOW

Amount

Preparing old decorated surfaces of wall by brooming down or steel wire brushing including cornices,pilasters etc and applying one coat of white cement wash with portland cement slurry to a smooth bodied opaque finish complete all as specified and directed by engineer in charge

All as per description of serial item no. 1 above but applying applying two coat of white cement wash on wall surfaces complete all as specified and directed

Preparing old decorated surface of wall by brooming down,scrapping down smoke soot,moulds,moss and trading oil and greasy spots,washing,rubbing down,stopping distempered surface and applying one coat of oil bound distemper with roller application white or tinted complete all as specified and directed

All as per description of serial item No. 3 above but applying two coats coat of oil bound distemper on wall surfaces complete all as specified and directed

Preparing old decorated surfaces by brooming down or steel wire brushing, smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of wall including cornices,pilasters etc and applying one coat of cement base paint complete all as specified and directed

All as per description of serial item No. 5 above but applying two coats of cement base paint on wall surfaces complete all as specified and directed

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour complete all as specified and directed by Engr-In-Charge.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note for item No 07 to 09 above (a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer.

M&L for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for complete removal of existing treatment from walls and applying two coats of white wash complete all as specified and directed

M & L for preparing of old painted surfaces of wood and wood based materials of any description over 10 cm in with or girth and applying one coats synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed

M & L for writing letter or figured (Block, Roman, Italic or Indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface complete all as specified and directed .

M & L for preparing and applying two coats of cement base paint on new Plasterd surface of wall complete all as specified and directed.

M & L for preparation and applying three coats of white wash on newly plastered surface of walls complete all as specified and directed.

M & L for preparation and applying three coats of white wash on new plastered surface of ceiling complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm/600x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6. complete all as specified and directed

All as per item no 25 above but on vertical surfaces over and including 10 mm thick plaster in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item no 27 above but on vertical surfaces over and including 10 mm thick plaster in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

Supply only 38mmx3mm glass dividing strips as in floors complete all as specified. (fixing included in item of floor topping).complete all as specified and directed

M&L For Hard core of Broken bricks of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness complete all as specified and directed

M & L for 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand incl taking down existing paver blocks complete all as specified and directed.

S&F chequered tiles of size 300x300 mm, rubber moulded coloured decorative designed cement concrete tiles 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor incl 15 mm thick screed bed with CM 1:4 incl taking down existing tiles complete all as specified and as directed

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for RCC 1:2:4 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

M&L for form work to soffits of suspended slabs, such as shelves and similar work; not exc. 200 mm thick for flat rough finish surfaces complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for 20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over 20 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing, moulding edges wherever required, making hole for gas pipe etc complete all as specified and directed.

Dismantling brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

S&F in repair 22 to 25mm bore MS PVC Coated fancy type curtain rod with fixing brackets, stops, finials etc complete allied fittings complete all as specified and directed.

S & F in repairs stainless steel curtain rods 22 - 25 mm dia with and including fixing of two Nos SS brackets and decorative type SS finials at both ends of curtain rod, complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed

S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

S & F in repair 20 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc min weight 210 gms complete all as specified and directed

S & F in repair of 20mm dia gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F in repair 15 mm dia gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair long body 15mm bore fancy type bib tap of, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair 15mm dia concealed stop valves brass fancy type, chromium plated with long shank and cup complete all as specified & directed.

S&F in repair CP angle valve fancy type of, long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and directed.

S&F in repair brass chromium plated shower rose with swivel joints 125mm dia incl fixing to steel pipe or union.complete all as specified and directed

S&F in repair CP brass 15 mm dia hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S & F in repair CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, trap sets and neceassary fitting and fixtures and fixing with Cement concrete bedding (excluding flushing cistern and flush pipe) and making good the disturbed portion with tiles matching adjacent area complete all as specified and as directed.

S&F vitreous china wash down water closet pan pedestal pattern, including P/S trap and connection to drain (or outgoing pipe) excluding pvc seat cover, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, PVC connection, cantilever brackets incluiding taking down existing cistern etc complete fixed in repairs complete all as specified and directed

S&F in repair vitreous China wash hand basin white size 550 x 400mm including fixing with brackets complete all as specified and directed.

S&F in repair 32mm bore brass chromium plated Waste fittings for kitchen sinks, basins, etc. with long screwed shanks and fly-nuts, flange end complete all as specified and directed.

S&F in repairs PTMT waste coupling 32 mm dia, half or full threaded complete all as specified and directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F in repair CP grating with or witout waste hole size 100 mm fixed with white cement in tiles flooring complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

M&L in repair Stainless steel soap dish fixed to wall with plug and CP brass screw complete all as specified and directed

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (110 mm Bore) complete all as specified and directed

S&F in repairs 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (75mm Bore) complete all as specified and directed

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F of PVC (SWR) bends, 110 mm bore, any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed

All as per above item no 79, but 75 mm bore, etc complete all as specified and directed

S&F in repair PVC (SWR) floor trap, plain with stainless steel grating including jointing with solvent cement ( Diameter of outlet 75mm) complete all as specified and directed

M&L for welding in repair exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exceed 6 mm complete all as specified and directed

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed.

Taking down Shutter not exc 1 sqm each complete all as specified and directed.

Taking down Shutter exc. 1 sqm and not exc . 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges,hold fasts etc. complete all as specified and directed

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F frame work as in door or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting and hanging, alsofasteningand fixing complete all as specified and directed

S&F in repairs rolled steel section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and similar works conforming to grade Fe 410-w (Gde-E-250 quality A) complete all as specified and directed

M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed

M&L for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.upplied and fitted to chowkats complete all as specified and directed.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

M&L for plain cement concrete cast in situ 1:3:6 type C1 using 12.5 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete all as specified and directed

Description all as per item no 98 above but without glazing bars complete all as specified and directed

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay complete all as specified and directed

S & F, 100 mm size butt hinges, stainless steel, and fixed complete all as specified and directed

S & F, 75 mm size butt hinges, stainless steel, and fixed complete all as specified and directed

S & F in repair 100 mm size butt hinges, stainless steel, including taking down old shutter fixed with welding or screw in MS/wooden frames and refixing with screws/ welding complete all as specified & directed all as specified and directed.

Description all as per item no 103 above but size 75mm complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed

Description all as per item no 105 above but fixed in repairs complete all as specified and directed

Description all as per item no 106 above but fixed in repairs complete all as specified and directed

S&F of 250 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed

S&F in repair 250mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate including taking down old fixed with welding or screwing in ms/wooden frame by screw/welding complete all as specified & directed

S&F Aluminium handles cast type anodised of 150mm complete all as specified and directed

S&F Aluminium handles cast type anodised of 100mm complete all as specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed

Description all as per item no 113 above but fixed in repairs complete all as specified and directed

S&F in repairs 40 mm wide neoprene/EPDM gasket/door seal complete all as specified and directed

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel /aluminium frames, glazed with putty or fixed with beads.complete all as specified and directed

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified and directed

ditto all as per above item no 118 but forsted/pin headed glass complete all as specified and directed

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S&F in repair including taking down from rivet, Nut & Bolt /welding / wooden beading stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/wooden beading/ necessary welding complete all as specified and directed

M&L for two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth.complete all as specified and directed

M&L for two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed

S&F in repairs kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincl all necessary fitting as per site requitment as per make and specification mentioned as per drawing and complete all as specified and directed by Engineer-in-charge on site.

M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete all as specified and directed

S&F magnet ball catcher for cup board shutters complete all as specified and directed

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed

S&F stainless steel handle, fancy type 150mm length with smooth finish matching the requirment of relevant is code as approved by engr-in-charge complete all as specified and directed.

S&F in repairs Hasp and staple, 100 mm stainless steel, fancy type, including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F Pre - painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed

Dismantling wall and ceiling board( fiber, plug, insulation, etc) or insulation boards/ slabs/ blankets, any thickness incl cover fillets.complete all as specified and directed

M&L for false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4(20mm graded agg) as in lintel,cills, steps; Seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). complete all as specified and directed

Taking down existing aluminium door shutter with frame area exceeding 1.5Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete all as specified and directed

S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading complete all as specified and directed

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F door stopper of size 100 mm aluminium alloy body and tongue, double legged with rubber ends complete all as specified and directed.

S&F in repair double legged floor door stopper of aluminium alloy body and tongue, anodised, rubber base and fixed in floor, over all length 75 mm complete all as specified and directed.

M/s Sachkhand Traders (BID ID -3142823)

ANIL CONSTRUCTION (BID ID -3143387)

M/s Bhadoria Associates (BID ID -3143295)

M/s Durga Construction Company (BID ID -3143313)

M/S Dwivedi Construction Coy (BID ID -3141949)

Ajay Sahu & Sons (BID ID -3141763)

M/S Reliance Construction (BID ID -3143312)

M/s Chandra Mohan and Sons (BID ID -3142696)

m/s raghubar dayal (BID ID -3143298)

Supreme Builders (BID ID -3143012)