Prov LWSS from Salana Nallah to Harizan Basti Salana in G.P. Thari in Tehsil and Distt Shimla HP

Amount

Cutting in earth work in all kinds of soil such as pick work, jumper work, blasting work and chiselling work etc. and disposal of excavated earth as directed within all leads and lifts.

Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work, jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc.then disposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Prov. and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work i/c all leads and lifts :-a) Foundation and plinth.

Prov. and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work i/c all leads and lifts complete in all respect. :-

a)Foundation footings, bases of column and the like and mass concrete.

b) Walls (any thickness) but not less than 0.10 m thickness) attached pillasters, buttresses,plinth and string courses etc. from top of foundation level upto floor two level.

c)Suspended floors, roofs, landings,shelves and their supports balconies, beams, girders, bressumers and cantilevers upto floor two level.

d) Column, pillars posts and struts upto floor two level.

e)Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Prov. and laying cement concrete 1:5:10 (1cement:5sand:10graded stone agg. 40mm nominal size) with 15 % plum and and curing complete excluding cost of form work in breast walls and retaining walls. The size of plum shall usualy be 150mm to 300mm as per PWD specifications.including all leads and lifts

Prov. and laying cement concrete 1:5:10 (1cement:5sand:10graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth i/c all leads and lifts complete in all respect

Prov. Mild steel/Tor steel reinforced for RCC work including bending, binding and placing in position complete upto floor two level i/c all leads and lifts complete in all respect. :-a) Tor steel.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work complete in all respect i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

a) Foundation,footings, basis of columns, etc. and mass concrete.

b) Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

c)Flat surfaces such as soffits of suspended floors,roofs, landings, and the like:-i)Floors etc. upto 200mm in thickness.

d) Edges of slabs and breaks in floor and wall:- Under 20cm wide.

e)Column Pillars, posts and struts square rectangular polygonal in plan.

f)Beams, cantilevers, girders and lintels:- Sides and soffits of beam, beam haunching scantilevers, bressumers and lintels not exceeding 1 mtrs. in depth in all height from floor.

g) Slopping or battering surfaces including folded plates: Where inclination to horizontal plane exceeds 30 degrees.

h)Stair cases with sloping or stepped soffits excluding landing.

Prov. and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agg.40mm nominal size)and curing complete excluding cost of centring and shuttering in: a) Foundation and plinth.

Random rubble masonry/polygonal rubble masonry(uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6 :12 (1cement: 6sand:12graded stone agg.20mm nominal size) in retaining and breast wall.of approved quality in foundation and plinth including levelling up with cement concrete 1:6 :12 In Cement Mortar.1:6. (1cement:6sand).

Boulder filling behind the retaining walls.

Prov. and laying cement concrete work 1:1:2(1cement:1 sand:2 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement in reinforced concrete work i/c all leads and lifts complete in all respect.:- a) Foundation and plinth.

b) Walls (any thickness) but not less than 0.1 m thickness) including attached pillasters,buttresses, plinth and string courses etc.from top of foundation level upto floor two level.

Prov. in RCC work smooth finishing of the exposed surfaces with cement mortar 1:3(1cement:3sand).

Supplying cast iron cover without frame for main hole (For frames of 500mm internal dia meters C.I.cover medium duty the weight of cover to be not less than 58 kg).including all leads and lifts in:-

Prov. 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes with 200mmx 200mmx 100mm cement concrete 1:3:6 (1cement:3sand:6graded stone agg. 20mm nominal size).

Laying and jointing in trenches,galvanised mild steel tubes(Light grade)i/c tube fittings such as Tee, elbow, union & nipple.(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete in all respect.Labour rate only.

15mm dia nominal bore.

20mm dia nominal bore.

25mm dia nominal bore.

40mm dia nominal bore.

80mm dia nominal bore.

Prov. and fixing brass full way valve with wheel of superior quality including all leads and lifts In :-

15mm dia nominal bore.

20mm dia nominal bore.

25mm dia nominal bore.

40mm dia nominal bore.

Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint:-a) In gratings framed guard bars, ladders, railings, brackets and similar works.

b) In beams, joists, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Brick work using common burnt clay building bricks in foundation and plinth in:- cement mortar 1:6(1cement:6sand) . 2nd class bricks.

Providing and placing in horizontal layer filtering media duly graded ,screened, washed and

cleaned as specified by the Engineer-in-charge i/c all leads and lifts.

I. Top layer:- Fine sand (Eff.size 0.20mm to 0.40mm and uniformity-co- efficient 2.00 to 3.00).

II. Second layer:- Coarse sand 3mm to 6mm.

III.Third layer:- Bajri 6mmto 20mm.

IV. Fourth layer:- Bajri 20mm to 25mm.

V. Bottom layer:- Broken stone 50mm to 75mm size.

Half brick masonry in common burnt clay building bricks in cement mortar 1:4(1cement:4sand) Ist class bricks.

Providing and fixing pressed steel door frames manufactured from commercial, mild steel sheet of 1.25mm thickneess including hinge jamp lock jamb beed and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lungs with split and tails to each jamp including steel butt hinges 2.5mm thick with mortor guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge.a) Profile A+B+C.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws:-a) 40mm thick deodar wood 2nd class.

Providing and fixing wire gauge shutters using galvanised M,.S. wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for door windows and clear storey windows i/c bright finished black enemelled iron hinges with necessary screwes.

(a) 40mm thick 2nd class Deodar Wood.

15mm cement plaster in single coat on fair side on brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounding angles, chambers and or rounded angles not exceeding 80mm in girth and finished even and smooth:-

i) Cement mortor 1:6.

20mm cement plaster on rough side of bricks/stone walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth:-a)In cement mortar 1:6(1cement:6sand).

6mm cement plaster to ceiling a)Cement mortar 1:3(1cement:3sand).complete in all respect i/c all leads and lifts.

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust , mortar dirt and other foreign matter.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and i/c apriming coat with distempering primer of approved brand and manufacture after thoroughly brushing the surface free from mortor dropping and other foreign matter and also i/c preparing the surface even and sand papered smooth.Priming coat with distemper primer.

Finishing wall with water proofing cement paint or approved brand and manufacture as and of required shade on undecorated wall surfaces two coats to give an even shade after thoroughly brushing the surface to remove dirt and dust of remaining work.

Precast terraazzo tiles 20mm thick (with marble chips of specified shade and specified sizes)laid in floors,treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6(1 cement:6 sand ) jointing with neat cement slurry mixed with pigment to match the shade of tiles (wherever required including rubbing and polishing complete with tiles of following shade including all leads and lifts :-(a)Silver Grey.

Precast terraazzo tiles 20mm thick (with marble chips of specified sizes)in skirting and risers of steps not exceeding 30cm in height on 10mm th ick cement plalster 1:3(1cement:3sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required including rubbing and polishing complete with tiles of following shade including all leads and lifts:- a)Grey.

Applying priming coat over new wood and other wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter including all leads and lifts.

a) With ready made paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfafes, with ready mixed paint brushing to give an even shade including cleaning of all dirt dust and other foreign matter,sand papering and stopping:-including all leads and lifts.

a)With readymixed paint other than white.

P/F M.S. grills of required pattern in wooden frames of windows etc.with M.S.flats square or round bars with round headed bolts and nuts or by screws complete in all respect including all leads and lifts as per the direction of the Engineer-in-charge.

a)Plain grills.

Stone soling properly hand packed filling interstices with spalls and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding material moorum or earth etc. 100mm spread thickness (finished work including materials and labour) within all leads and lifts as directed by the Engineer-in-Charge.

Prov. and fixing anodized alumimium sliding door bolts anodized colour and shade bolts,nuts and screws etc. complete.

P/F aluminium Tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete.

P/F aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete.

Prov. 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts nuts and wooden plugs and embeding in cement concrete block 30x10x15cm.1:3:6 (1cement: 3sand:6graded stone agg. 20mm nominal size).complete in all respect as per the direction of the Engineer-in-charge including all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 cement :3sand:6 graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including all leads and lifts.

Providing and laying brick tiles over mumty roots grouted with cement mortar 1:3)11cement:3sand) over a 12mm layer of cement mortar 1:3(1cement:3sand) and finished neat.

1.80 mtrs. High fencing with steel post of built up section 2.50 metre centre to centre with nine horizontal lines and two diagonals of galvanised steel barbed wire (IS: 278-1962 type.I) weighing 9.38 kg/ per 100 metre (minimum)strained and fixed to posts with G.I staples, including coal tarring of ballies complete) cost of post, struts and straining bolts shall be paid for separately).

Painting two coats (excluding priming coat) on new steel and other metal surfaces with readymixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter i/c all leads and lifts and as per direction of Engineer-in-charge.:-

balwant Singh Panwar

GULAM MOHIDEEN MIR

Suneel Dutt

DEEP CHAND SHARMA

Bharat Panwar