Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹28.4 L+₹1,429 (0.05%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹28.9 L+₹50,366 (1.77%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹29.1 L+₹68,560 (2.41%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹29.9 L+₹1.4 L (5.05%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
3 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR
ADDN ALTRN TO BLDG NO P 484 AT UDAIPUR MIL STATION UNDER AGE I UDAIPUR
2022_MES_516728_1
82122/85/E8
Open Tender
Civil Works
Item Rate
180 days
UDAIPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) UDAIPUR
₹62,000
17 Jun 2022
5 Apr 2022
10 May 2022
5 Apr 2022
3 May 2022
19 Apr 2022
60 days
Amount
Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth & getting out in hard/dense soil.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.
Demolition of brickwork or stone/boulder masanory,laid dry below or above ground level and removing material from site complete all as specified and directed.
Material & Labour cement concrete in foundation filling incl mass concreting PCC (1:4:8) type D-2 using 40mm graded stone aggregate.
M&L for RCC type B1 1:2:4 (20 mm graded aggregate) nominal mix in Chajjas all as specified & directed
Material & Labour mild steel TMT bar 6 to 8mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia.
Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.
Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M & L for double charged vitrified ceramic tiles light shade of size 600x600mm 8-10mm thick (suqare/rectangular)polished in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.
M & L for double charged vitrified ceramic tiles light shade of size 600x100mm 8-10mm thick (suqare/rectangular)polished in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.
Material & Labour coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Material & Labour coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed.
Material and labour for Udaipur green marble polished in bathroom corner shelf, window cill and counter top for wash hand basin, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of green marble stone including half round moulding etc.
Material & Labour for 18-20 mm thick Granite slabs Jet Black/Telephonic Black on WHB plateform,window cill & Jambs etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing and half rounded at one corner complete all as specified and directed.
Material & Labour brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6.
Material & Labour for brick work with sub-class `B' bricks built in CM 1:4, straight or curved on plan exceeding 6 M mean radius using old size bricks in half brick thick wall etc.
Taking down cement/cement lime plaster any description on Brick or stone walls etc including raking out joints,hacking for key,scrubbing down with water etc.
Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed
Material & Labour rendering 5 mm thick in CM 1:4 on concrete surface of ceiling & finished even & smooth without using extra cement.
Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound, ISI marked complete all as specified and directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legsThe frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer andas per directions of Engineer-in-charge
Supply and fixing PVC factory made shutter solid, PVC moulded prelam coloured on both side door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.
Supply and fixing aluminium handle size & shape as per existing handle for aluminium door or 150 mm long etc. all as directed.
Supply and fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed
Supply and fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.
Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed .
Supply and fixing for stainless steel wire cloth, 0.36mm nominal dia of wire average width of aperture 1.40 mm and fixed with stainless steel wire staples.
Supply and fixing vitreous china premium quality/1st quality wash down water closet EWC with & incl flushing cistern of capacity 10 Ltrs complete one set white (closed pattern incl all necessary accesories like rag bolts/gel gasket etc.(excluding flushing cistern & flush pipe ) with ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding .
Supply and fixing plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device
Supply and fixing health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specied
Supply and fixing toilet paper holder with flat recessed type stainless steel fixed to walls with CP brass screws etc complete all as specified & directed.
Supply and fixing Vitreous China W.H.B. white oval type counter below type of size 570 x 445 mm, waste pipe and brackets etc.
Supply and fixing 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.
S/F waste coupling chromium plated size 32 mm with long thread.
Supply and fixing in repair 15mm bore angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
Supplying and fixing 15mm bore two way angle stop cock brass CP type complete all as specified and directed.
Supply and fixing aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed.
Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified.
S&F and repairs Brass CP wall mixer for mixing cold and hot water screwed down in pipe 15mm dia all as specified and directed.
S&F Brass CP Bottle trap of dia 40mm for Wash basins with inlet and outlet screwed for pipe or connections including necessary packing union cap and fixed as per directed.
S&F and repairs Brass CP wash basin mixer for mixing cold and hot water screwed down in pipe 15mm dia all as specified and directed.
S&F and repairs CP shower roses with or without swivel joints,any size including fixing to pipe or union as per directed.
Supply and fixing brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed.
Cutting existing water steel tubing 20mm bore galvanized iron pipe for alterations and provision for branch connection by inserting tee union elbow etc. complete all as required at site.
Screwing existing steel tubing 20 mm bore for alteration or additions etc all as specified
Material & Labour CPVC tubing 15 mm dia of pressure 10kgf/cm2 with all fittings and fixed complete to brick/stone wall or laid in floor concealed.
Material & Labour CPVC tubing 20 mm dia medium grade with all fittings and fixed complete to brick/stone wall or laid in floor concealed dia.
Supply and fixing gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as specified and directed.
Material & Labour PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed .
Material & Labour PVC (SWR) floor trap 75/110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed .
Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
Supply and fixing PVC (SWR) bends any radius 75mm dia complete all as specified and directed .
Supply and fixing PVC (SWR) bends any radius 110mm dia complete all as specified and directed .
Supply and fixing PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed .
Supply and fixing PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed .
Supply and fixing PVC (SWR) vent cowl 75mm dia complete all as specified and directed .
Supply and fixing PVC (SWR) vent cowl 110mm dia complete all as specified and directed .
Supply and fixing stack clamps out of 40mm by 4 mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore etc all as specified.
Supply and fixing in repair rotational molded polyethylene water storage tanks white in colour, tripple layered with threaeded lid/cover, weight of tank should not be less than 33.00 Kg (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.
Supply and fixing 20 mm PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed.
Material & Labour two coats of oil bound distemper (acrylic) white or tinted over a coat of priming over 1 mm thick wallcare putty including preparation of new pastered surfaces of walls etc.
Material & Labour two coats of oil bound distemper (acrylic) white or tinted over a coat of primer over 1 mm thick Asian/Birla/JK wall putty including preparation of new pastered surfaces of ceiling, complete all as specified and directed.
Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over wall of required shade and colour providing and applying 1mm thick putty over plastered surface to prepare even and smooth complete all as specified.
Supply & fixed Powder coated aluminium window/ventilator/Door shutter & partition with frame fixed/sliding type aluminium section weighing not less 0.55 Kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified.
Supply & fixed 4.8 mm thick plain or tinted glass, ordinary quality and glazing rubber beading in square n exc 0.5 sqm in each pane complete
Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.
Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately
Material & Labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame as per manufacturers instruction.
Supply & fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI > 78, solar reflection > 0.70 and intial emittance > 0.75 on waterproof and sloped surface terrace , laid on 20 mm thick cement sand mortar in the ratio of 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1 incl rubbing and polishing of the surface upto 3 cuts complete including providing skirting upto 150mm height along the parapet walls in the same manner
S&F Ist Class Teakwood plain,solid,straight chowkats and frames,wrought,framed rebated on the solid,rounded or chamfered put together with glue pinned a joints includinmg French polishing on surfaces of any description,width of girth incl cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.
Supply and fixing Ist class teakwood factory made 35mm thick plaindesign as per direction of Engr-In-Charge framed panelled shutters (Min 4 Panels),with panels of timber are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) inclunding French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including one coat of wood filler on new works with two or more coats.
Supply and fixing Ist class teakwood (hollock) factory made 35mm thick glazed skelton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including S&F bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed including cleaning and preparing the surface including one coat of wood filler on new works with two or more coats
Supply & fixed for powder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel all as specified and directed.
Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod complete all as specified and directed.
Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair, complete all as specified and directed.
Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.
Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair, complete all as specified and directed.
S&F double legged door stopper of aluminium alloy with rubber all as specifed and directed by Engr-in-charge
Material & labour for fabrication of pressed steel copboard shutter in repair using 1mm thick MS plan sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking a arrangement mortice lock, handle etc complete all as specified as per drg No CEJZ/TD/219 sheet 1/3 to 3/3
M&L for high durability SS glass railing stain/polished grade 304 height between 900mm to 1100mm size of railing 50mm dia 40mm x 40mm baluster and 20mm x 20mm supporting pipe etc encl glass clamps etc and as dir by Engr-in-charge
S&F 12mm thick toughened glass in area not exe 1.5 Sqm each in any shape with and encluding stainless steel cleat for fixing to jambs/ cill/ flooring etc as per dir of Engr-in-charge
M&L for grinding/ polishing/ itching and rounding of glass any type all as specified and directed.
M&L for two coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer cpmplete all as specified and directed.
S&F 0.50mm thick prepainted galvalume Al-Zn coating AZ-70 GI based corrugated steel coloured having tensile strength of 550MPa as an roof coveringe fixed with self tapping screws at every alternate corrigation as specified etc
M&L for steel work in tubular post, purlins and trushesh incl special shaped washer, gusset plate and nut bolts etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979.
Excating to post holes each n. exc. 0.50 Cum, getting out, returinig filling in any ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing a surplus soil to a distance n exc 50 m and making good surface complete
M&L cement concrete 1:3:6 type C -2 (using 40mm graded stone aggregate) in foundation filling and mass concrete of post including necessary formwork etc.
Providing precast cement concrete of type B0 1:2:4 (12.5 mm graded aggregate) set in cement mortar 1:4 louvres and jallies type ,25mm thick (measured solid), including all mould- ings but excluding frame all as specified & directed .
M&L for false ceiling with 12mm thick gypsum board in ceiling fixed with screws and including seamless framework of galvanised iron at 20x20x27 gauged galvanised section fixed at interval not more than 750mm and intersection of 20x43x27 gauge galvanised section not more than 450mm centre to centre. Suspended/screws from roof, all as true line and level, preparation of surfaces with Putty finish,sanding the surface till smooth surface is obtained and finally applying two coat of oil bound distemper paint over one coat of primer all as directed.
Material and Labour for POP decorative cornice moulding exc 10 cm but n exc 20 cm in width or girth fixing between junction of wall and ceiling at certain locations including two coats distempering all as spd and directed etc.
Material & Labour for Precast cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregates as in manholes cover slabs and set in cement mortar 1:4 complete.
Material & Labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 200mm bore of pipe plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) complete.
M&L reinforced concrete pipe 200mm dia class NP2, laid and jointed complete with collars
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in hard / dense soil complete.
Material & Labour for removing excavated material not exc. 50 m and depositing in soft/hard soil, where directed .
M&L Mild steel TMT bars 10mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, stirrups, spacers & binders & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for form work to soffits of suspended slabs for manholes tanks and similar works not exc 200mm thick (horizontal and sloping) and flat
M&L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6.
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge.
M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch. (a) One light point controlled by one 5 Amps switch
(b) One Fan point controlled by one 5 Amps switch
(c) One bell point controlled by one bell push switch
(d) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size
(e) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.
(f) One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size
(g) One light point controlled by two 2-way switch
(h) All the item no 2(f) above but for One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size for geyser point
(j) All as per items No 1 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.
S&F switch piano flush type single pole one way 5/6 Amps.
S&F switch piano flush type single pole two way 5/6 Amps.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd
S&F Bell push, flush type, 5 amp.
S & F Buzzer, Ding Dong AC. 230 volts, single pole.
S&F lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one.
S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make :
S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one.
S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one.
S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one.
Supply & fixing LED integrated batten tube light fittings 20 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.
Supply & fixing LED light decorative type 5/7watts 230 volts AC wall mounting/hanging type complete all as specfied and directed.
Supply & fixing LED Bed side lamp 2/3 watt flexible type 230 volts AC wall mounting type complete all as specfied and directed.
Supply & fixing energy meter 1phase digital type 440 volts with complete accesories all as specfied and directed.
Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection of Metal pipe connesctions as required at site, all as specified and directed by Engr-in-Charge.
M&L MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 12 way including dismantling old one.
S&F RCBo'S DP 30mA 230 Volts 32 Amps.
S&F MCB SPN 230 Volts 40 Amps.
S&F MCB SP 230 Volts 6- 32 Amps.
Supply & fixing 2 feet long 9 Watt complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.
Supply and fixing ceiling fan 1200mm sweep, BLDC (brush less DC motor) 230 volts AC with complete accessories with remote controllable all as specified and directed
S&F exhaust fans AC single phase 230/240Volts of size 150/200 mm sweep with complete accessories all as specified and directed by Engr-in-charge.
Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 3core
Taking out old unserviceable protection Pipe and supply and fix light grade 40 mm dia GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as directed
S&F Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x1.5 sqmm FR PVC insulated copper conductor, single core cable in surface/recessed as required.
S&F Submain wiring alongwith earth wire with the following sizes of 2x 4.0 sqmm + 1.25 sqm FR PVC insulated copper conductor, single core cable in surface/recessed as required.
S&F Submain wiring alongwith earth wire with the following sizes of 2x 6.0 sqmm + 1x 4.0 sqm FR PVC insulated copper conductor, single core cable in surface/recessed as required.
S&F LED security light luminaries of 10 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 1.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge,
Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.
Supply and replace on line booster pump single phase with automatic pressure regulation upto 4.0 kg / cm 2 MAKE : GRANDFOS /CRI/Cropmton Greaves
M/s SUNIL ENTERPRISES
m/s sharma constructions
M/s Ajay kumar Garge
naveen enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .