Provision of Iron Doors with connected works in certain sheds and provision of electric water cooler, OHT and connected works to provide drinking water facility near airmen mess at AFS AMLA

Amount

B/R Portion Taking down wooden chowkats or frames with shutters exceeding 4.0 Sqm and not exceeding 8.0 Sqm each (without taking off shutter from the frame) complete all as directed.

Demolition of cement concrete ( unreinforced) as in ground floor and paving not exc 15 cm thickness below or above GL

M&L for 150 mm thick PCC 1:2:4 Type B-I (40mm graded aggregate ) ,as in top finished fair and even complete all as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as directed.

M&L Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified.

S&F Framed work Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and heavy duty hinges or steel hanging door fittings, handles, locking arrangement (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing inlcuding welding complete as specified and direcetd

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Fe 410-W (Gde-E- 250) quality-A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified and directed.

M&L for preparation of old painted surfaces of any description wood, steel, iron, concrete, brick, stone, etc over 10 cm width or girth and applying two coat of fire resisting paint all as specifed. including cracks filling with exterior wall care putty where ever necessary and as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes etc not exc 10 sqm on plan and getting out in soft/ loose

M&L for PCC 1:4:8 type D-2, using 40mm graded stone agreaget as in foundation filling and mass concrete complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical for rough finished surfaces of concrete all as specified

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles & mass concrete complete

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 14 above herein but 5 mm dia and over upto 10 mm dia in stirrup

Use and waste of Formwork to sides of pillers, posts struts column and stainchions for rough finished surfaces of concrete all As specified

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate in pillers, posts struts column and stainchions etc all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc. also splays between floors and beam etc for rough finished surfaces of concrete all as specified

M & L for RCC M-25 (Design mix) using 20 mm graded aggegate in roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves over 1.5 mtr span

Material & labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and surface finished even and smooth W/O using extra cement all as specified and directed.

Supply Installation, testing and commissioning of Water Purification Plant of capacity 250 LPH for producing safe drinking water comprising of sand filter, carbon filter, MCF, suitable cap of pump and UV protection & ultra filtration module and Raw water tank 1000 liters including addition/alteration of pipe line & fitting all specified as under and as directed. The unit rate shall include the following: - Make: - M/s Supreme Technologics, M/s Kaustubh Solutions, M/s Earth water technologies

(A) Inlet water Characteristics: - (i) Temprature-Max, 40° C (ii) PH- 6-7 (iii) Color - Nil (iv) Turbidity - less than 1 NTU (v) Total Suspended Solids - Nil (vi) Total Alkality - 200 (vii) Total Hardness - 300 (viii) Total Dissolved Solids - 1000 (ix) Heavy metal, Fe, Silica - Nil (x) Oil & Grease - Nil

(B) Treated water Characteristics (i) Flow - 250 LHP (ii) PH - 6 to 7 (iii) Total Dissolved Solids - 700 PPM (iv) Total Hardness - Less than 250 PPM (C) Micron Cartridge Filter (i) Quantity - One No (ii) MOC of Housing - FRP/Big Blue make (iii) Filter Qty - 1 Nos (iv) Size - 20" x 4" (v) Flow -1200 LPH (vi) Pupose - for removing > 5 micron Suspended Particles

(D) Antiscalent Dosing Pump (i) Quantity - One No (ii) Dosing Rate - 6 LPH (iii) Type - E dose/I-DOSE/equivalent (iv) Chemical - Antiscalant Liquid (v) Dosing Tank - 100 Ltr white HDPV (vi) Pupose - Scaling Resistance for Membrane and increase Membrane Life (E) Low pressure Switch (i) Quantity - One No (ii) QP. Pressure - 0-5 kg/cm2 (iii) Make - Danfoss (iv) type - Inline (v) Function - One No (vi) Quantity - One No (vii) OP. Pressure - 0-5 kg/cm2

(F) Instrumentation (i) Quantity - One No (ii) Location - RO Product (iii) Make - GCS (iv) Pupose - TO check TDS in PPM through online digital system (G) Low Meter (i) Quantity - 2 Nos (ii) Type - Online (iii) Location - RO Product/Reject water (iv) MOC - Acrylic (v) Make - GCS (H) Pressure Guages (i) Quantity - 2 Nos (ii) Mounting - Bottom & Back water (iii) Type - Borden type tube (iv) Connection - ½ '' BSPT (v) Range - 0-150 Psi - Low pressure, 0-600 psi - High low pressure

Supply Installation, commissioning of water cooler fully stainless steel, electric driven single phase 230 V AC having approx. storage and nominal cooling capacity 120/150 ltr all as specified and as directed by Engr-in-Charge.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Samaksh Enterprises