Installation of fancy poles and 72-84 watt lights with single arm in ward 41 devpuram park

Supply and installation of Decorative Ornamental Pole. Total height of the pole shall be 4.5 m nominal above the ground. The pole is made out of grooved mild steel tube and Cast Iron in two steps. Cast Iron embellishments are fitted with the help of provided to accommodate a 6amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in attached drawing. The different sections of the pole are joined together by means of welded joints. MS PIPE POWER COATING. The Decorative Pole Shall be machined and Polish properly to give it a smooth surface. The Decorative Pole is duly pretreated by shot Blasting Process and Painted in U.V. ray resistant P.U. Coating in approved color shade. Devorative pole shall be installed at desired location including foundation of the pole by main Cement Concrete foundation of 1:2:3 (1 Cement : 3 Course sand : 6 Raded stone aggregate 40 mm nominal size) with the help of anchor bolts and 38 mm G.I. sleeve complete in all respect as required.

Supply and Installation of 72-84 W. LED based Decorative Luminaire. The Luminaire is made of Spun Aluminium A Polycarbonate Diffuser shall be fitted in the Luminaire. Luminaries should be IP 67, IK 08 rated Integrated suitable BIS approved LED Driver shall be fittedinside, luminous efficacy more than 120lm/W total more than 9000 lumens, the Led Post top light having efficiency> 85% , power factor shall be > 0.9, THD <=lOP» , with driver standard voltage withstand range of 100-300 V AC and inbuilt surge protection of Min. 4 kv.Theluminarie shall have external surge protection device of lOkV.A Suitable Led Driver shall be Fitted inside the Luminaire. The Luminaire body should be machined and polished properly to give it a smooth surface. The Luminaire shall be Suitable for the fitment on the required Single are brackets. The Luminaire shall be duly pretreated and painted in U.V. ray resistant polyurethane paint in approved color shade. A two way connector is provided for the mains connections. The Luminaire is suitable for 240v, single phase, AC, Decorative Luminaire shall be installed at the desired location on the Double arm brackets equvivalent to

Supply and Installation of Decorative Sigle Arm bracket. The decorative bracket is made out of mild steel, Cast – iron & cast Aluminium. The mild steel, cast iron & Cast aluminium part are joined together 7 are fabricated to get the desired design. The Decorative Bracket shall be machined and Polished properly to ghive it a smooth Surface. The Decorative Bracket is duly pretreated by Shot blasting Process and painted in U.V. ray resistant P.U. coating in approved color shade. The decorative bracket should have the arrangement to fix the required luminaire. The bracket should have the arrangement suitable to be fitted on the required pole complete in all respect.

Supply and laying of aluminium conductor PVC Insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On Surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer-Incharge 10sq mm x 4 core PWD SOR 2017-18 S.No. 501- (b)+ Labour Charges.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as required.

S/F and following Capacity of automatic Street Light cubicle control pannel painted with anticorrosive alkali and acid Proof paint consisting of time switch TSO 100 series with contractors, HRC Fuse, isolating switch metering instrument & instrument box with CTs etc in case of TPN, Complete in all respect 40 A SPN PWD SOR 2017-18 No. 807 (c) II

Supply and burring of sale earthing electrode T – 19 Zn- Zinc coated, length up to 2000 mm outer pipe 48.4 mm x 3.2mm, inner pipe 26.9 mm x 2.6 mm, terminal dia. 12 mm, coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 Kgs. activated soil (BFC) capable of reducing the coil resistivity with good mixture of retaining capacity along with 30 cm squarare C.I. frame with hinged cover & masonary housing. (From electode terminal to switch board, cost of 25x3 G.I. stip will be extra). Make : as approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B.

Providing and fixing 25 mm x 5 mm G.I. Stril in 40 mm dia G.I. Pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and re- filling etc. as required.

Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II Complete with Fitting and cutting, Jointing etc. Direct in ground (At suitable depth below ground level) etc. Complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal).

Supply and fixing of plain of pin type copper cable socket (Lug) S.No. 504.