REPAIRS TO TEMP ROOF AC SHEETS MANGALORE TILES LEACKAGE SEEPAGE FALSE CEILING AND ROOF TREATMENT AT HESTING LINE IMH LINE EME RECORD EME DEPOT BN OLD MERCURY LINE NEW MERCURY LINE ROBERT LINE ROBERT EAST AND ROBERT CENTRE UNDER GE SOUTH SECUNDERABAD

Amount

Dismantling of single layer mangalore pattern or similar tiles roofing inclduing ridges complete all as specified and directed.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified and directed.

M&L for except Roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified and directed.

Dismantling the battens for tiles of any size including tiling fillets spaced exc 15cm complete all as specified and directed.

S&F rolled Mild steel sections as in main and cross beams hip and jack rafters, purlines fixed independentlyof Fe-410W (Gde-250) quality A complete all as specified.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering incl ridges complete all as specified and directed.

M&L for 6mm thick AC corrugated sheets in roofs fixed with 'L' or 'J' type in cranked hooks bolts all as specified.

M&L for asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets complete all as specified and directed.

Dissmantling timber scantling 40 sq cm and over in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Hand rails, half round or other steel section nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes notching of wire, etc and similar work conforming to Fe-290 Gde E-165

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) .

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 20 mm graded aggregate ) as in floors complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 450x300x6mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar, or cement line mortar including all quoins, arches pillars etc.

M & L for brick work with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M & L for applying two coats of OBD including priming with alkali resistant primming paint over 3mm thick wall care putty and preparation of new surface complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying three coats of white washing all as specified.

M&L for applying three coats of white wash on ceiling including perpartion of new plaster surfaces complete all as specified and as directed.

M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation of surfaces over a coat of priming paint complete all as specified & directed

M&L for applying two coats colour washing on wall surfaces including prepartion of new surfaces complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqn each.compete all as specified an directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed.

S&F aluminium handles fabricated type, anodised, 150 mm size complete, all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.

M&L for providing false ceiling with anodised aluminium snap grid frame work with size of grid 605 x 605 mm with aluminium main tee size 25 x25 x1.60mm thick and, cross T section of size 25 x 25 x 1.60mm thick and wall angle of size 25x25x2mm thick fixed to roof with rawl plugs/GI wire suspenders complete all as specified and directed.

M&L 12 mm thick Gypsum board , 600mm x 600mm in size fixed aluminium frame work including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed.

M&L for plain cement concrete 1:5:10 type E-2 using 40 mm graded aggregates as in floor filling complete all as specified and as directed.

Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed by Engr-in-charge.(Note: WPC will be measured and paid separately)

M&L for providing water proofing APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. not ess than 150 gms/sqm) lland on primed surface by forced application complete all as specified by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed

M&L for 40mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in padding (level course) on roof finishinf cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishingcement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note : Water proofing compound will be measured and paid separately.

M&L for a coat of compatible primer @0.30kg/Sqm Providing and laying 4mm thick APP modified five layer water proofing membrane and weighing as detailed and not less than 3.6kg/sqm with non woven polyster matt black finished and application procedure as detailed in particular specifications and torch applicaton of membrane with 10cm overlap over a coat of bituminious 80/25 @ 1.2 Kg /Sgm and applying solar reflecting bituminious alluminum paint @0.10kg/sqm over membrane complete all as directed and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Supply only water proofing compound complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&Fin repair vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including 10 ltr capacity PVC flushing cistern and flush pipe,15mm PVC connection of size 450mm , complete all as directed and as specified by Engineer-in-charge.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and directed.

S&F in repair Stop valves, cp brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S & F in repair 15 mm dia stop valves cp brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75mm complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.

S&F PVC (SWR) bends 110mm all as specified and as directed.

S&F PVC (SWR) bends 75mm all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes and fixed to iron pipes.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

M&L for uprooting of wild trees such as grass/bushes etc from the roof/wall surfaces/AC sheets/soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the dameged plaster by providing CM 1:3 and finish the surfaces to match with existing surface complete all as specified and as directed.

M&L for crack filling with approved crack filler to arrest seepage and running water through masonry/RCC surfaces etc complete all as specified by Engineer-in-Charge .Make.Dr.fixit Leak Plug or its equivalent.

M&L for preparation of plastered surfaces and applying two coats of water proof coating(Dr.Fixit rain coat exterior water proof coating) over a coat of primer (Dr.Fixit prime seal diluted with potable water by volume in 2:1 ratio,2 parts of primer and 01 part of water) including filling of cracks upto 5mm width,with Dr. fixit crack-X,or Dr.fixit unifiller on external surfaces of wall to arrest the seepage/dampness and running water in the masonry surfaces complete all as specified and directed.Dr Fixit or its equivalent.

M&L Cutting the V groove on the existing concrete surface, priming the surface with water based Elastomeric modified liquid membrane shaliurethene BTD, manfactured bySTP or equivalent with the mixture of Shaliurethene BTD and water in 1:1 ratio and apply 400gms/sqm, allow it to dry, with slightly dampered surface apply shaliurethene BTD using brush or by roller on primed surface @1kg/sqm as first coat, spread polyster fleece/no-oven/50gms/sqm geo textile on top for 10-12 hours, apply second coat of shaliurethene BTD @1kg/sqm complete all as specified and as directed.

ATUL ENTERPRISES

G SATISH REDDY AND CO

M/S C MALLIAH & SONS

BEEGEE DESIGN SYSTEMS

harshraj and co

M/S DIVIJA BUILDERS

G.MADAN MOHAN