Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC OLD DHARM KHANTA NH 68 SANCHORE | SANCHORE | JALORE | RAJASTHAN | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.1 L+₹7.2 L (29.9%)Rejected-Finance | L2 | Rejected-Finance Other then Lowest | |
| 3 | L3₹31.2 L+₹7.2 L (30.2%)Rejected-Finance | L3 | Rejected-Finance Other then Lowest | |
| 4 | L4₹35.4 L+₹11.4 L (47.8%)Rejected-Finance | L4 | Rejected-Finance Other then Lowest | |
| 5 | L5₹37.4 L+₹13.4 L (56.1%)Rejected-Finance | L5 | Rejected-Finance Other then Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)-143530
Certain repair to Central Institutes, APS, other units and day to day maint of certain bldg at Tibri , Gurdaspur, DBN, Kasowal and Batala area under AGE B/R-I, GE Gurdaspur.
2022_MES_550907_1
GE GSR-16/2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE Gurdaspur
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹80,000
Yes
24 Nov 2022
10 Sept 2022
15 Oct 2022
10 Sept 2022
8 Oct 2022
26 Sept 2022
Amount
Dismantling of Brick tiles in terrace fixed in cement mortar in single layer
Demolition mud phuska in roofs any thickness including plastering and leeping all as spd
M&L for 40mm thick brick tiles laid over and including15mm thick bedding layer in CM(1:6) and joints grouted and pointing with CM (1:3) mixed with 5% crude oil by weight of cement.
All as per Srl item No 03 above but except tiles
Roughing the surface of old concrete floor picking sweeping cleaning and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
M&L cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding averaging thickness of 50mm or more complete all as specified and as directed.
M&L 10 mm thick cement plaster in CM (1:4) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and directed
Supply only integral water proofing compound
Taking down cement plaster on brick or stone walls, ceiling etc, including raking out joints, hacking for key, scrubbing down with water, etc.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement).
M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra cement) on ceiling surface.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even.
M&L for complete removal of existing treatment over old wall surface complete.
M&L preparation of new plaster surface and applying two coats of cement base paint.
M&L preparation of new plastered surfaces of wall with 1 to 2mm wall putty complete all as specified and directed.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43ltre/10sqm over and including priming coat of exterior primer applied @ 0.90 ltre / 10sqm over new surfaces after preparation of surface.
M&L for applying a coat of primer for distemper complete all as specified and directed.
M&L for applying two coats of oil bound distemper complete all as specified and directed.
M&L preparation of new surface and applying three coat white wash on ceiling complete all as specified & directed.
M&L preparation of new plastered wall surface and applying three coats of white wash .
M&L for preparation of old treated surface and applying one coat of cement based paint on wall .
Material and labour for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43ltre/10sqm over old surfaces after preparation of surface.
M& L for preparation of old treated surface and applying one coat of white wash on ceiling surfaces
M&L for preparation of old treated wall surface and applying one coat of oil bound distemper complete.
M & L for preparation of old decorated wall surfaces and applying one coat of white wash complete all as specified
M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint
All as per Srl item No 29 above but on steel surface
Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats.
Taking down chowkats with shutter exc 1.50sqm but n.exc 4 sqm each (without taking off shutter for the chowkats).
Taking down door shutter of any description, area exc.1sqm and not exc. 2 sqm each and refixing in same opening after making necessary repair, easing and adjusting complete all as directed.
Resecuring or easing & adjusting without taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.
S&F pressed steel frame for doors with one or more rebate including necessary lugs, hinges, lock strike, plate etc complete of size 105x60mm and filling PCC 1:2:4 (type-B0) in the frames complete all as spd.
All as per Srl item No 36 above but 125x60 mm complete all as specified
Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
S&F 30mm thick factory made Flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
S&F anodised aluminium door shutters, aluminium section weighing average not less than 1.00kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down old existing shutters complete all as specified.
S&F anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including taking down old existing shutters complete all as specified.
S&F anodised aluminium frame for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc. including taking down old existing frame complete all as specified
M&L in repair for block boards, 18/19mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame work for shelves, partitions and shutters complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples/ wooden beads complete all as specified and as directed
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples/ wooden beads complete all as specified and as directed
S&F aluminium anodized barel tower bolt of extruded section 150mm long
S&F aluminium handles, cast type, anodised 100 mm long
S&F in repair Aluminium alloy handles fabricated type size 125mm complete all as specified and directed.
S&F aluminium alloy handle fabricated type anodized of size 150 mm long
Supply and fix 150mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and as directed
Supply and fix 100mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and as directed
S&F mild steel butt hinge, medium weight, 75mm long cold rolled for cupboard
S&F in repair butt hinges 100mm size medium weight cold rolled mild steel to any frame as wooden/metal through nut & bolt/ welding complete all as specified and directed.
S&F butt hinges 75mm size medium weight cold rolled mild steel to any frame as wooden/metal through nut & bolt/ welding complete all as specified and directed.
S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws complete all as specified and as directed.
S&F 75mm size hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw all as specified and directed.
S&F in repair 100mm size hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw all as specified and directed.
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/bolts/ screws in metal/wooden frame complete all as specified and directed.
S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately
S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately
S&F 250mm size mild steel casement stays, with hinged joint and two plates, with studs complete
Hacking out old broken glass panes of any thickness description from wooden frame or stone concrete or steel frame, or brick surrounds, glazed with putty or fixed with beads and prepared to receive new glass panes complete all as specified .
S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares n.exc 0.50 Sqm in each pane.
All as per Srl item No 66 above but figured glass, pin head type
S&F 5.50mm thick black sheet glass ordinary quality in squares exceeding 0.50 sqm in each pane and glazing for aluminium door/window with rubber beading/ aluminium as required complete all as specified and directed.
S&F rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank complete all as spd.
S&F rotational moulded polytheylene triple layered white water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank complete all as spd.
S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.
Taking up or down GI steel tubing and connections 15mm bore
Taking up or down GI steel tubing and connections 20mm bore, for refixing or removal to store
Fixing only old steel tubing and connections 15mm bore in new or old position (walls, ceiling, floors, etc) with all fittings including cleaning
Fixing only old steel tubing and connections 20 mm bore in new or old position in walls, ceiling, floors, etc. with all fittings including cleaning
S&F GI tubing 15mm bore medium grade, fixed to wall,ceiling or in floor etc with all fittings complete all as specified and directed.
S&F GI tubing 20mm bore medium grade, fixed to wall, ceiling or in floor etc with all fittings complete all as specified and directed.
S&F in repair bib taps 15mm dia cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair angle/stop valve 15mm dia cast copper along chromium plated facny type with capastan head screwed both ends for iron pipe or for union and fixed in repairs all as specified and directed.
S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified and directed.
S&F in repair 15 mm stop cock screwed to iron pipe cast copper alloy CP concealed type with long shank and capstan head for Bath shower complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair shower rose 125mm size CP cast copper alloy with swivel joint fancy type complete all as specified and directed.
S&F in repair tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets with brass screws complete all as specified and as directed.
S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap including connection to trap and flushing pipe, etc and bedding in PCC 1:7:12 type F-2 complete all as specified and directed.
S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) white including plastic water closet seat white closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
S&F in repair vitreous china bowl urinal flat back size of 465 x 355x 265mm white with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, flush pipe grating and union for discharge pipe complete all as specified and directed.
S&F in repairs vitreous china wash basin white flat back, size 580mmx 450mm including brackets, cutting for and pinning in ends of brackets or erecting stand brass CP waste coupling call as specified and directed.
S&F in repair brass CP waste coupling 32mm dia (half and full threaded) for WHB complete
S&F in repair PVC low level flushing cistern 10ltr capacity, with syphonic action PVC float valve, brackets and 32mm bore PVC flush pipe etc. complete all as specified and directed.
S&F in repair PVC connections 15mm dia and 600mm long with PTMT nuts all as specified and directed.
Demolition of cast iron, PVC or SGSW drain pipes, jointed in cement mortar including fittings and taking out of trenches, if required
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ in floor complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ in floor complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single 'T') equal or unequal for 110 mm bore pipes with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.
S&F PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and as directed.
Supply and fix in repair for PVC (SWR) floor/ nahani trap 110 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
Supply and fix for PVC (SWR) floor/ nahani trap 75 mm dia of outlet, plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
Supply and fix for stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipe complete all as specified and as directed.
All as per Srl item No 105 above but for 75 mm bore.
M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.
M&L Brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L Brick work with sub class' B', old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Demolition of stone slabs, chequered tiles, interlocking tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.
Labour only for grinding of existing machine cut kota stone slab flooring including rubbing and polishing complete .
M&L for marble work of any shade 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms , stair case and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
M&L machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed bedding 20 mm thick in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing (with bees wax polish) complete all as specified and directed.
All as per Srl item No 115 above but Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement plaster 10mm thick in CM 1:4.
M&L 75mm thick cement concrete type D-2 , 1:4:8 (40mm graded aggregate) sub base complete all as specified and directed. (to raise level only)
Material and labour for providing 25mm thick precast cement concrete (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) (measured solid) as in louvers and jallies, including all mouldings, set in cement mortar (1:4) complete all as specified and as directed.
Providing, cement concrete , type B1 1:2:4, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including form work as directed
Demolition of cement concrete (unreinforced) in floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.
Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.
M&L for 40mm thick plain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded stone aggregate), as in flooring finished even and smooth without using extra cement complete all as specified and directed.
M&L ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and including 10mm thick screed bede in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dado including demolition existing tiles with screed complete all as specified and directed.
M& L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match over and including 15 mm thick screed bed in cm 1:6 including demolition existing tiles with screed complete all as specifed and directed.
M&L non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over including 15 mm thick screed bed in cm 1:6 complete including demolition existing tiles with screed all as specified and directed.
M&L screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishing complete all as specified and directed.
M&L for vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, outdoor, set, jointed and pointed in neat cement slurry with white cement and pigment as in path/ floor, pattern of tile as approved by GE including demolition existing tiles with screed complete all as specified and directed. Make: Somany Durastone, Kajaria Duratech, Johnson Endura or equivalent of Nitco, Varmora as approved by GE.
M&L 25mm thick layer of fine sand laid to the profile as filling under floors including watering and consolidation complete all as specified and directed.
M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
S&F in repairs Mortice lock ,aluminium vertical type size 65mm 2 levers complete all as specidfed and directed.
Supply and fix in repair for aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed
M&L for petty repair to existing in built Aluminium Door, locks, hinges including making the lock/Glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge including provision of duplicate keys as required.
Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and including reinforcement with 8mm dia. TMT bars as required in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces at height upto 12m complete all as specified. Note:- Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor.
S&F in repair floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, overall length of cover plate 140mm all as specified and as directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as complete.
S&F in repair 20mm dai. curtain rod, mild steel, PVC coated including brackets, stops, rollers, knobs etc. as per site requirement complete all as specified and directed.
S&F in repair PVC cabinet mirror for bathroom 40cmx50cm, fancy type, white or coloured complete all as specified and direcetd.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed
S&F in repair brass CP grating 100mm to 125 mm dia complete all as specified
S&F PVC cover with fittings of PVC water tanks of capacity exc 250 ltr but not exc 1000 ltr fixed in repairs complete all as specified.
Opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes/fittings to smooth flow of water from bib taps /showers/ WHB pillar tap/ stop valves complete by air pressure /water gravity pressure all as specified.
M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 250 ltr & n.exc 500 ltrs including disinfecting this tank, writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.
All as per Srl item No 142 above but exc 500but n. exc1000 ltrs
S&F in repairs SS coupling 100mm dia. for stainless steel kitchen sink complete all as specified & directed.
S&F in repairs PVC urinal waste pipe fixed complete all as specified & directed
S&F PVC waste pipe 32mm dia 800 to 1000mm long fixed to wash fitting of wash basin all as specified and directed.
S&F in repair new brass spindle with nylon washer and removing leakage of water of any bib tap/stop valve suitable for 15 to 20mm bore pipe complete all as specified.
S&F in repair new brass spindle with nylon washer and removing leakage of water of any concealed type suitable for 15 to 20mm bore pipe complete all as specified.
S&F in repair tap/valve head/ handle 15mm dia cast copper alloy fancy type chromium plated round/square hole complete all as specified and directed.
S&F in repairs PVC kit complete for 10 Litre low level PVC Flushing cistern complete all as specified and directed.
S&F in repair SS L-type jet spray with 1 m hose pipe for fitting in WC complete all as specified and directed by EIC.
Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
M/s. Nirmal Singh
MALKIT SINGH AND SONS
M/s kulwant singh and sons
KAILASH CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .