Construction of solid waste Management near play ground at Khurumpora P/H Trenz

Amount

Engagement of labour for clearance of site including disposal the same as per direction

Earthwork in bulk excavation by mechnical means in trenchs for foundation drains pipes cables etc( not exceeding 1.5metre in width and for shaft wells cesspits and the like not exceeding 10 sqm on plan) including dressing of sides, ramming of bottoms lift up to 1.5 m and 1 mtr from cutting edge including getting out excavated and disposal of surplus earth within 50 mtrs all kinds of soil

Providing and laying stone soling dry hand packed tightly including carriage from sourse to site of work

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) crushed aggregate including carriage of sand and bagree

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) incl. extra level and carriage of sand , and bricks from sourse to site of work

Providing and fixing of MS pipes 100 mm dia with 5mm thick for colums including welding charges fixed in proper position as per direction and carriage from sourse to site of work

Structural steel work in built up section, trusses and framed work , including ,cutting , hoisting , fixing in position including welding etc and applying a priming coat of approved steel primer and carriage

12mm thick cement plaster in mix1:4 ( 1 cement :4 fine sand) including carriages of sand from sourse to site o work

Providing and fixing precoated Galvanised iron profile sheets( size ,shape and pitch of corrugation as approved by engineer incharge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 gms per sqm as per IS 277, in 240mpa steel grade 5-7 epoxy primer on both side of the sheet and polyester top coate 15-18 microns sheet should have protective guard film of 25 microns minimum to avoide stratches during transportation and should be supplied in single length up to 12 mtr or asected by engineer in charge. the sheet shell be fixed using self drilling/ self tapping screws of size ( 5.5x 5.5mm ) with EMDM seal complete up to any pitch in horizantal/ vertical curved surface excluding the cost of purlins rafters and trusses including cutting of size and shape wherever required and carriage , lifts complete

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.

Providing and applying white cement based putty of specified thickness of approved brand and manafacture over the plastered wall surface to prepare the sth surface even and smooth complete 2mm thick

Providing and fixing I mm thick MS sheets for soffits eves boarding including frame work and scafffolding carriage

Providing and fixing sign board of size 2'x3' of angle iron including writing painting complate as per direction of site in charge including carriage

UBAID SHABIR

MOHD YOUSUF BHAT