Conversion of Existing 3nos Type A an 3nos Type B building to hostel

Amount

Part -A (Civil Construction Works) 1) Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below.

2) Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead

3) Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

4) Dismantling PVC or Asbestos rain water pipe of all diameter with fittings and clamps including the serviceable materials within 100 m lead as directed by the Engineer-in-charge

5)Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

6) Dismantling old ceiling plaster carefully and cleaning the surface for plaster including scaffolding disposal of rubbish to the dumping ground within 200 m lead etc. complete as directed by the Engineer-in-charge

7) Dismantling of RCC works including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

8) Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

9) Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead

10) Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

11) Dismantling the following dia of C.I pipes including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

11.1) 75 mm Dia to 200 mm Dia C. I pipe

12) Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc.

12.1) Debris up to 1 km.

13) Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge

13.1) Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand

14) Extra for Brick work in super structure above floor II level and up to and including 20 m height by lifting material

15) Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

16) Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

17) Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor

17.1) Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials

18) Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

18.1) Up to and including 300 mm Joists, 350 mm channels, and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials

19) Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

20) Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws

20.1) 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

21) Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

21.1) Second class teak wood

22) Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

22.1) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

22.2) Extra for colour anodizing

23) Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

23.1) With clear float glass panes of 4.0 mm thickness

24) Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

25) Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

26) Providing and fixing anodised aluminium tower bolts of size 300 X 12 mm (barrel type) ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.all as per specifications and as per drawings.

27) Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

28) Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

29) Providing and fixing Aluminium Hanging Floor Door Stopper, (With TwIn Rubber Stopper) ISI Marked, anodised (Anodic Coating Not less than grasde AC 10 as per IS: 1868 transparent or dyed to required colour and shade, with necessary brass / SS screws etc. complete

30) Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

31) Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

32) Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

32.1) Using Tiles of size 600 X 600 mm

33) Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

34) Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

35) Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting,window sills in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish complete as per specifications, drawings and as directed by the Engineer-in-charge

36) Extra for nosing in steps of treads Using Kotah stone

37) Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

37.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

38) Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15m C.P. brass pillar tap of approved make, 15mm x 600 mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fitting sand brackets ,cutting and making good the wall sand testing complete all as per specifications and as directed by the Engineer-in-charge (a) White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

38.1) White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

39) Providing and fixing stainless steel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 200 mm depth of approved make and model with C.I. brackets and stainless steel waste coupling, fittings, including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge

40) Providing and fixing 6mm thick mirrors of size 600x450mm of approved make with bevelled edges complete with 6mm thick asbestos sheet back ground fixe do walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

41) Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

42) Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

42.1) 15 mm dia bib cock of approved type and make .

43) Providing and fixing 150 X150 mm soap dish of white viterious Chinaware, of approved make including chasing walls making good the same after fixing the China Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge.

44) Providingand fixing C.P brass towel rail of approved make 600mm long complete fixed towalls with30mm Cpbrass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

45) Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

46) Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes.

46.1) 20 mm dia G.I pipes with C-Class TATA pipes

46.2) 25 mm dia G.I pipes with C-Class TATA pipes

46.3) 32 mm dia G.I pipes with C-Class TATA pipes

47) Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge

48) Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design.

48.1) 150 x 100 mm size gully trap "P" type

49) Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge

49.1) 15 mm n.b CP brass Angle cock of approved make

50) Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

51) Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

52) Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

53) Providing and fixing Heavy Quality C.P brass sink cock (table mounted model) of approved make as per specifications and as directed by the Engineer-in-charge.

54) Providing and fixing Heavy quality flexible PVC waste pipe of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge

54.1) 32 mm dia flexible PVC (semi-rigid) waste pipe

55) Providing & fixing 3 in 1 Mixer Cock for Bathroom of approved make (Hindware) with all fitting & fixtures completed as per specification and as directed by Engineer In-Charge.

56) Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter

57) Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.

57.1) 150 mm Dia RCC Hume pipe class Np2

58) Providing, supplying, fixing in position, under floors or in walls sand cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.1729 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site

58.1) 100 mm dia sand cast iron S&S pipe as per IS:1729 with 1.00 kg lead / joint

59) Providing and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item)

60) Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.

61) Providing cement based water proofing treatment to the new terraces, chajjas, cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherient holes, voids, honeycombs etc. in the concrete slab, setting brickbat coba in waterprrof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall up to a height of 300 mm in thew shape of vattas, with waterproof plaster finished smooth with trovel in cement / geru with false markings of 300 mm squares complete as directed by the Engineer-in-charge

61.1) Average 65 mm thick for chajjas using river sand / crushed sand

62) Providing Chemical based water proofing of modified acrylic emulsion Polymer and Elasomeric waterproofing coating of "M/s. INDOFIL"- MC-76 or approved equivalent product over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net complete including cleaning and preparation of surface and testing by ponding water complete with following operations 1. Removing of all loose materials by wiremesh and clean entire terrrace with clean water by using water jet wherever required. 2.Open all visible crack by plaster cutting machine in "V" shape 3. Dilute Indifil binder with water in the Ratio of 1:4 and pour on the bare slab to be treated 4. Apply Indfofil binder and cement in the ratio of 1:1 and water to obtain paste like consistancy and fill the cracks. 5.Apply Indofil bond coat of INDOFIL binder and cement in the ratio of 1:1 to entire terrace. 6. First coat of INDOFIL binder & cement at the rate of 1.48sq.m per litre of Indofil 7.Lay polycon based firous net (polester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding 8. Apply one miore coat of INDOFIL binder & cement above fibre net 9. Apply 2 coats of INDOFIL- FlexCote -WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water. 10.Test the surface for water tightness

63) Providing Rough cast plastering 25 mm thick for exterior masonry and concrete surfaces laid in 2 operations base coat with cement mortar 1:4, (using crushed sand), 15 mm thick and finishing coat with cement and gravel/ stone chips in proportion of 1:3, 10 mm thick including double scaffolding up to 10.00 metres height wherever necessary, curing and hacking of concrete surfaces, addition of water proofing compound @ 2% by weight of cement or as per manufacturers specifications for both the coats complete as directed by the Enginner-in-charge (water proofing compound to be supplied by the contractor)

64) Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

65) Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

66) Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item

67) Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

68) Providing and painting with two coats with oil bound distemper of approved make and manufacturer over new work to give an even approved shade and including priming coat with one coat of cement primer including preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge.

69) Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

70) Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

71) Providing and painting old walls (TWO coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

71.1) On rough cast plaster surfaces

72) Providing and applying varnishing on wooden surfaces, Two coats of glue sizing with approved make varnish over an under coat of flatting varnish with varnish of approved brand and manufacturer including preparation of the surface by sand paper and filling the inherrant holes with wood filler and two finish coats to get required finishing all as directed by Engineer-in-charge.

73) Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

74) Attending minor plumbing complaints such as bib tap, stop cock & pillar cock leakages (washer & tap replacement) flush tank repair (siphon repair, handle & nob repair work) & other misc. works related to plumbing etc. complete. Material will be supplied by the department free of cost. Tools and tackles shall be brought by the contractor.

75) Attending carpentary, complaints such as plaining of doors, repairs/replacement of hinges, locks, panels etc. & other misc. work related to carpentary etc. complete. Material will be supplied by the department free of cost. Tools and tackles shall be brought by the contractor.

76.1) From 0.0 to 1.5 m depth below average G.L.

77) Murum filling under floors of specified thickness in layers of not more than 150 mm thickness including supplying required materials and consolidation etc. complete (Murrum to be brought from out side campus of BARC)

78) Supplying, Stacking and Laying of 150 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

79) Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels

79.1) For Super Structure

80) Providing and fixing CPVC inlet connection pipes heavy quality suitable for hot and cold (Prince or equvalent make)

80.1) CPVC Pipes 15 mm OD SDR 11

81) Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge

81.1) Using 100% SFMC

81.2) Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment)

Part -B (Furnishing works) 1) Providing and fixing wardrobe of size 6’6’’(1980 mm) X4’(1220 mm) having two compartments of depth 1’9”(550mm) made out of 18mm thick waterproof marine plywood of approved make fixed with 1.0mm foremica of approved shade and make on both side back of wardrobe will have 8 mm thick approved make waterproof marine ply with 1.0 mm formica on both sides. Both units to have drawers made out of 12mm thick marine plywood. The drawers to be mounted on telescopic channels and with high quality locking arrangement with two nos. key. The unit to be provided with shutters and fixed shelves made out of 18 mm thick waterproof marine plywood. The unit to be provided with SS hanger rod of matt finish of approved thickness. Shutters to be provided with SS stopper chain, handles and magnetic lock at top of high quality make etc. complete as per drawing and as directed by Engineer-In- Charge.

2) Providing and fixing single bed in laminate finish of size 3’0”(915 mm )X6’6”(1980 mm ). The head board and the foot board to be 25 mm thick duly laminated on both sides with teak wood lipping Patti on edges. The size of head board and foot board will be 600 mm and 450mm respectively. The side rails to be made out of double 19mm thick marine plywood i.e 38 mm thick duly laminated on both the sides. The top of the bed to be 12 mm thick marine plywood laminated on both sides. The rails to be joined to the headboard and footboard with tongue and groove joint with additional aluminum L angle of size 100 mm x 3 mm and rails to be provided with Ist class BTC teak wood legs of size 38 mm x 38 mm and height as shown in the drawing. The top to be supported with 3 nos. teakwood members of 2’’(50 mm)X1.5’’(38 mm )at equal spacing etc complete as per specifications and as directed by Engineer-In- Charge.

3) Providing Study table of size 3’6’’ (1070 mm) X2’ (600 mm) X2’6” (760 mm) made out of 18 mm thick waterproof marine plywood fixed with sunmica on top. The table to be supported on 40 mm Ist. Class teak wood members with side rails of plywood of 200 mm width. The unit to have 2 drawers made out of 12mm thick marine plywood of depth 80 mm duly laminated on both sides with telescopic channel , handles and 6 mm thick back panels duly laminated on both sides etc. complete as per specifications and as directed by Engineer-In-Charge.

4) Providing Study chair made out of wooden frame work of 1 st class BTC as per sample. The seat /back of the chair to be upholstered with latex rubber covered with approved fabric etc. complete as per specifications and as directed by Engineer-In-Charge.

5) Providing arranging in position and fixing Shutter dimension as required in 19 mm thick.100% Waterproof Burch Plywood with Acrylic Surface, All Shutter to be Burch Plywood with Acrylic Surface with 19mm in front . Plywood internal surface to be Acrylic laminated. as per drawing & instruction of the EIC. All beadings, mouldings and Exposed wood work to be a teak wood (As per requirement of EIC). All teak wood moulding shall be finish in 3 coats of French polish. Rate include of all hardware (Hettich/Ebco/Godrej Etc.) and finished with approved laminate (in side 0.8 Acrylic Lam, outside 1mm Acrylic Lam) as per drawing approved drawing specification and direction of the Engineering in Charge

5.1) Cup board Shutter/ kitchen platform

6) Supplying, providing & fixing Sleepwell Starlite Glamour Extra Firm Bonded Foam Mattress (78 x 36 x 5 inch) as per specifications and as directed by the Engineer-in-charge . The Sleepwell Starlite Glamour Extra Firm Bonded Foam Mattress should contain folllowing accessories : I)Size - Single II)Brand - Sleepwell III)Construction Type- Foam Construction IV)Item Firmness Description- Extra Firm V)Weight- 34830 Grams VI) Primary Material- foam VII)Dimensions- 78 x 36 x 5 Inch.

Part -C (Electrical works) 1) Removal of complete electric wirings, switch boards, Holders, Celling rose, Celling Fans and other electrical fittings in the rooms of Type- IX flats Bldg No. 1, 2 & 3 in BARC Staff Colony, Tarapur. Total nos. of flats - 60 Nos.

2) Distribution Board Supply, Installation, testing and commissioning of Distribution Board made out of CRCA sheet steel duly painted with powder coating complete with Neutral link, Earthing Link, cable end box and accessaries of following Rating: wiring and interconnections is in scope of the contractors.

2.1) Lighting DB : 12 way SPN DB with Cable end box

3) MCB's /RCBO Supply installation, testing and commissioning of MCB's /RCBO of following ratings installed in the above mentioned DB.

3.1) 32A , 2 pole 4 Module RCBO(30mA)

3.2) 6-20A SP MCB

4) Supply, installation and Guarantee of 1.1KV grade, FRLS PVC insulated wire of following size and laying through casing caping or pulling through conduit pipe safely with out any joint in wire. All wires should be confirm IS:694 with latest amendments. (Red/Yellow/Blue, Black, Green colour )

4.1.1) 1.5 mm², flexible Multistrand single core copper wire

4.1.2) Installation

4.2.1) 2.5 mm², flexible Multistrand single core copper wire

4.2.2) Installation

5) Supply and Installation of PVC Casing Caping with all accessories such as T, inner outer bend, coupling, junction etc of following Size. Installation of Casing Caping by drilling hole and fixing with 35/8 screw and rawl plug.

5.1) 32 mm x 12 mm x 1.2mm

5.2) 25 mm x 12 mm x 1.2mm

6) Switch boxes Supply, installation of Modular Surface type switch boxes with cover plated of following sizes for installation of plate type switches/sockets/telephone sockets/data point junction boxes etc.

6.1) 12 module box with Cover Plate

6.2) 6 module box with Cover Plate

6.3) 3 module box with Cover Plate

6.4) 1/2 module box with Cover Plate

7) Controlling switch & socket boxes Supply Installation ,testing and commissioning of electrical control switche/socket/Regulator etc of following rating on existing terminal boxes

7.1) 20 A switch

7.2) 6/16 A socket

7.3) 6 A switch

7.4) 6 A socket

7.5) 20A SP MCB & 2 pin & E Socket with box

7.6) Bell Push Bell Push plate type switch

7.7) Blank Plate

8) Bell Suppy and fixing of bell with transformer

9) Lamp holder Suppy and fixing of angle lamp holder. Angle holder is to be fixed on PVC box.

10) Ceiling Rose Suppy and fixing of Round ceiling rose 3 plate. Ceiling rose is to be fixed on PVC box. Supply & installation of all items is in the contractor's scope.

11) Lighting Fixtures Supply Installation ,testing and commissioning of following lighting fixtures with all control accessories including interconnection from existing boxes.

11.1) LED Surface batten 25 watt LED Aluminium batten, 4feet

11.2) 9 Watt LED Lamps

11.3) 5 Watt LED Lamp

11.4) LED Flood light fitting : 26 Watt LED fitting along with driver unit.

11.5) 12 watt LED surface squre fitting

12) Fans 12.1) Ceiling Fans Supply Installation, testing and commissioning of 1050mm sweep, BLDC ceiling fan operate on 140-285V , 50Hz, AC supply with Fan regulator suitable to mounting on modular box conforming to relavent IS as per tender specification .

12.1.1) Supply

12.1.2) Installation on existing fan hook

12.1.3) Installation on mounting clamp / plate with anchor fastner etc. Mounting plate for installation of ceilling fan should be four hole square with 04 nos. Anchor fastner

12.2) Ceiling Fans Supply Installation, testing and commissioning of 1200mm sweep, BLDC ceiling fan to be installed on exsisting fan hook operate on 140-285V , 50Hz, AC supply, conforming to relavent IS as per tender specification .

12.2.1) Supply

12.2.2) Installation

12.3) Exhaust Fan Supply Installation, testing and commissioning of 200mm sweep, Exhaust fan operate on 230V , 50 cycles, AC supply, conforming to relavent IS.

12.3.1) Supply

12.3.2) Installation

13) Electric Geyser Supply, installation, testing and commissioning of 1 ltr, instantaneous type 3kW Geyser, including supply and installation interconnection with suitable size copper tube to water pipe line.

14) Water cooler :- Supply, Installtion , Testing & Commissioning of Potable water purification system with inbuilt water cooler, 80 liter storage capacity stainless steel body.

15) LED TV :- Supply, Installtion , Testing & Garrentee of 43" Full HD Smart Android LED TV with all acessareis

17) Supply and Installation of GI Cable Route Marker: GI cable route marker to be installed at LT Cable/ Telephone cable route made of GI angle should be grouted in concrete of size 200mm x200mm x200mm. Top of GI angle should be fitted with 100mm x150mm x8mm Aluminium casting plate written " Telephone cable "on it. The route marker total height is 1000 mm, it should placed at depth of 700 mm below ground level and 300 mm above ground level

18) Supply, Installation,Testing, Commisioning and Gurantee of 1.1KV LT Power Cable Stranded Aluminum conductor, XLPE insulated, PVC "ST-2" inner sheathed (extruded) Galvanised Steel flat strip Armoured and overall PVC "ST-2" extruded sheathed as per IS 7098 and as per specification given in the tender. The total length of the cable should be marked with / have embossing of size, voltage grade, make and length on every one meter length of the cable. of following size.

18.1) 50 Sqmm x 3.5 core

18.2) 25 Sqmm x 4 core

18.3) 16 Sqmm x 4 core

18.4) Laying of LT cable : Laying of LT cable 1.1 KV grade XLPE insulated, Aluminum conductor at a depth of 900 mm below the ground level, covering the same with sand and baked bricks at both sides of the cable and top, as directed by Engineer-in-Charge. (Excavation for under ground cable will measured separately under Excavation item 16)

18.5) End termination of LT cable: Supply and making end termination of 4 core, 25 Sqmm Aluminum Conductor, XLPE insulated, PVC sheathed (extruded) G.I. round wire armoured 1.1. KV grade cable with Heavy duty Cable gland and heavy duty long barrel copper lugs. Crimping should be done with hydraulic machine only. work should be done as directed by EIC.

19) Modification in existing service panel including painting, minor fabrication work and replacement/ fixing of the following: i) 160 A MCCB 4 Pole with phase barrier and spreader link - 1 No. ii)125A MCCB 4 Pole with phase barrier and spreader link - 1 No. iii)32A SP MCB- 07 Nos. iv) 15A Combine box - 01No. v) 9w led lamp with holder - 01No. vi) Neutral Link - 01No. vii) Earthing Link - 01No. viii) 32A C rail terminal block ( 6 nos.) with C rail suitable for terminate upto 10sqmm flexible wire ix) Internal wiring with 6sqmm FRLS Cu wire Note : Supply of all materials is in scope of the contractor and minor fabrication of the work is as per site requirement or as directed by engineer incharge.

M/S DATTATRAY CONSTRUCTION

RACHCON INFRAPROJECTS Pvt Ltd

MAHENDRA REALTORS AND INFRASTRUCTURE PVT LTD