Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.3 L+₹3.7 L (12.7%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹33.6 L+₹4.1 L (13.8%)Rejected-Finance HOUSE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L3 | Rejected-Finance Not Being lowest | |
| 4 | L4₹35.9 L+₹6.4 L (21.5%)Rejected-Finance SCO 248 GROUND FLOOR SEC 20 PANCHKULA HARYANA 134112 | PANCHKULA | HARYANA | 134112 | L4 | Rejected-Finance Not Being lowest | |
| 5 | L5₹39.3 L+₹9.7 L (32.8%)Rejected-Finance | L5 | Rejected-Finance Not Being lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
21 Mar 2022, 6:00 pmClosed
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-76/2021-2022 REPAIR TO RCC PARAPETS, CHHAJJA, PLASTER, ROOF, SOIL WASTE AND VENT PIPE AND INTERNAL AND EXTERNAL FINISHES OF OTM ACCN AND CERTAIN REPAIR TO DRAINS, FENCING, PATH/CULVERT UNDER AGE B/R II AT CHANDIMANDIR
2021_MES_492439_3
GE/CHM-76/2021-2022
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineeer
₹99,000
Yes
7 Apr 2022
24 Feb 2022
28 Mar 2022
24 Feb 2022
21 Mar 2022
7 Mar 2022
Amount
Demolition of reinforced cement concrete any thickness in any position complete all as specified.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Material and labour taking down, chipping and removing the loose, split, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforcement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 10 metre (Appx) complete all as specified and as directed. Note:- Make;- Dr fixit/ Sunanda/chemestik/fosrock.
Material and labour Welded steel wire fabric, fixed complete to steel members , Weight per square n.exc 4Kg metre complete all as specified and directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Material and labour rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement and including and providing necessary scaffolding , safety precautions and other requisite arrangements as per site requirement complete all as specified & directed. NOTE : water proofing compound to be measured and paid separately
Material and labour, 15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick wall surfaces finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
Material and labour 10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directed
Material and labour preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
Material and labour preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed
Material and labour for two coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed
Material and labour, preparation of old decorated surfaces by removing spoiled paint/scale dirt with wire brush or mechanical means/grinder including washing rubbing the surface and applying two coats of oil bound distemper over a coat of wall care putty interior grade in two coats smoothening the surfaces with sand papers and applying coat of wall primer complete all as specified and directed.
Material and labour, preparation of old decorated wall/ceiling surfaces by removing spoiled paint/scale dirt with wire brush or mechanical means/grinder including washing rubbing the surface and applying two coats of exterior emulsion paint over a coat of wall primer complete all as specified and directed.
Material and labour, preparation of old decorated wall/ceiling surfaces by removing spoiled paint/scale dirt with wire brush or mechanical means/grinder including washing rubbing the surface and applying two coats of exterior enulsion paint as per manufacturer instruction complete all as specified and directed.
Material and labour, preparation of old decorated wall surfaces and applying one coats of exterior enulsion paint as per manufacturer instruction complete all as specified and directed.
Material and labour one coat of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed
Material and labour, preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed
Material and labour for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
Material and labour preparation of old surfaces of walls and applying two coats of cement base paint, complete all as specified and directed
Material and labour one coat of white wash on old decorated ceiling surfaces including preparation of old surfaces complete all as specified and directed
Material and labour preparation of old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed.
Material and labour writing letter or figures (Block, Roman, Italic or Indian) not exc 10 cm Height, including stops, coma, dash, hyphens, brackets etc over black synthetic enamel painted surfaces complete all as specified and directed
Material and labour preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour applying one coat of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.
Material and labour, preparation of old decorated concrete or plastered surface exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.
Cutting down small trees / bushes from wall/roof/chajja of building including digging out the roots from brick work or any other structure portion of building including applying root killer chemical as per manufacturer instructions and making good the disturbed portion with PCC 1:2:4 to match the existing surface complete all as specified and directed
Material and labour for providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over the cement plaster / stone surface over base coat including necessary steel scaffolding work upto 25 meter height all as per manufacturer instructions complete all as specified and directed.
Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors fixed in repair complete all as specified and directed by Engineer-in-charge.
Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors fixed in repair complete all as specified and directed by Engineer-in-charge.
Supply and fix 110mm bore PVC (SWR) bends any radius, fixed in repair complete all as specified and directed
Supply and fix 75mm bore PVC (SWR) bends any radius, fixed in repair complete all as specified and directed
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
Supply and fix pre-painted galvalume aluminium zinc coating (AZ70) GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Supply and fix pre-painted galvalume aluminum zinc coating (AZ70) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Supply and fix rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 as grating over drain etc, complete all as specified & directed
Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish complete all as specified & directed .
Material and labour brick work with fly ash brick old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Material and labour brick work with fly ash brick old size bricks, straight or curved on plan exc 6 metre mean radius built, half brick thick walls built in cement mortar 1:4, complete all as specified & directed.
Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.
Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 40mm thick sand cushioning, including dismantling of old paver block and removal of debris to a distance n.exc 1.5 Km of any description complete all as specified and directed
Supply and fix concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris of any description complete all as specified and directed
Material and labour in repair chequered cement concrete tiles (endura tiles) 300x300x10mm thick as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6 all as specified and directed by Engineer-in-charge. makes: somany(Dura stone ), HR Johnson ,(Endura) or equivalent as approved by the GE.
Dismantling of posts or struts of RCC) any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed
Taking down existing barbed wire of any description and removing to store complete all as specified and directed.
Dismantling fencing wire mesh,any type ,complete all as specified & directed by Engineer-in-charge.
Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Supply and Fixing mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion , drilled and countersunk for balusters , nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.
Material and labour for mild steel round bars 10mm dia and over, cut to length fixed in chain link fencing complete all as specified.
Supply and fixing 2mm thick plain coloured FRP roofing sheet,transparent, cut to size, fixed in steel frame with self tapping screws/ coach screw complete att as specified and directed
Supply and fix for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, complete all as specified & directed.
Taking down and refixing after easing & adjustment mild steel frame work as in gates of ornamental / intricate design , framed and hung including pintol hinges, stops, hand made sliding bolt, locking arrangements and handles etc complete all as specified and directed.
Material and labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Supply and fix galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified & directed by Engineer-in-charge. (Note: - Each line wire to be measured).
supply only mild steel galvanished chain link fencing including line wires, any mesh, size & type as directed to any type of standard rails etc including provn of binding wire complete all s specified and as directed (Note-Mild steel round bars as in line wires for chain link fencing shall be measured and paid seperatly as supply only. Note : (i) Fixing included under item No 59 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
fixing only mild steel galvanished chain link fencing including line wires, any mesh, size & type as directed to any type of standard rails etc including provn of binding wire complete all s specified and as directed
Supply and fix PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls , valley, gutter, roof sheet etc with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed
Supply anf fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E-165 complete all as specified and directed.
Supply & fix in position ornamental type of sections straight or curved having x –section rounded, square or rectangular as in stainless steel railing, balusters, newal post, with matt finish and 304 grade as per Indian standard and including grinding, cleaning and filling the welded spots with SS finish including necessary fixing arrangement complete all as specified and directed (As per design approved by GE)
Gunjan and Gunjan Associates
m/s AR Construction co
VARUN TRADERS
JOGINDER NATH GUPTA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .