Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.8 L+₹84,953 (7.77%)Rejected-Finance NOT FOUND | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹11.9 L+₹94,110 (8.61%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹12.0 L+₹1.1 L (10.2%)Rejected-Finance 4 BY 8 BLOCK H NEAR VIJAY CHOWK EAST DELHI DELHI 110051 | EAST DELHI | DELHI | 110051 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹13.7 L+₹2.7 L (25.0%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
MILITARY ENGINEER SERVICES, GARRISON ENGINEER (AF) SIRSA-125055
REPAIR/MAINT/IMPROVEMENT OF WATER SUPPLY DELIVERY MAINS WITH ALLIED WORKS IN DOMESTIC AREA AT AF STN SIRSA
2023_MES_606945_1
GE/SRA/T-37/2023-23
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) SIRSA
₹20,000
Yes
7 Aug 2023
30 Jun 2023
21 Jul 2023
30 Jun 2023
20 Jul 2023
15 Jul 2023
1 Jul 2023 - 6 Jul 2023
Amount
Taking up or down Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :- (Note: Earthwork shall be measured and paid seperately)
100mm bore
80mm bore
50mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Relaying/Re-fixing Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush complete all as specified and as directed for the follwing size of pipes :- (Note: Earthwork shall be measured and paid seperately)
50mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed for the foll0wing size of pipes :- (Note: Earthwork shall be measured and paid seperately)
100mm bore
80mm bore
50mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Supply and Laying Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed for the follwing size of pipes :-
50mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for taking out/up and laying of Water Main /Pipe, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Surplus Soil providing Heaps along the Route of the Pipe Line in Soft/Loose Soil, complete all as specified and as directed.
S&F Gun metal gate valve as per IS : 778-84 Class-1 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed for the following size of pipes :-
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
Supply and fix in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm bore (Minimum weight 210 gms) complete all as specified and directed. (MAKE: PRAYAG, CAT NO: 152 /POLYTUF, CAT NO: 1012(b) / PEARL, CAT NO: BCC-302 or equivalent product in other makes specified in tender)
All as per item No. 08 above but of size 25mm (MAKE: PRAYAG, CAT NO: 153 /POLYTUF, CAT NO: 1012(c) / PEARL, CAT NO: BCC-303 or equivalent product in other makes specified in tender)
M&L Cast Iron Pipes Fittings such as Bends (any type, radius and angle) Tapers any type, (Straight, Bend, Increasing, Decreasing or Double Socket, etc.) Tee Pieces Single Branch, ‘Y’ Junction, Double Branch, Cross (all Sockets or Socket and Spigot) Collars, Caps and Plugs upto 200mm bore (dia) including taking down/out damaged Cast Iron Fittings, complete all as specified and as directed.
M&L for Opening the casing of CI Sluice valve of size 80/100 mm dia at site and taking out the gate including spindle and clamp and refixing the casing only in the original position for normal supply of water and carrying of gate, spindle and clamp to workshop by transport for neccessary repair and refixing the same at site after repairing at workshop complete all as specified and as directed.
M&L for Opening the casing of CI Sluice valve of size 150/200/250 mm dia at site and taking out the gate including spindle and clamp and refixing the casing only in the original position for normal supply of water and carrying of gate, spindle and clamp to workshop by transport for neccessary repair and refixing the same at site after repairing at workshop complete all as specified and as directed.
M&L for repairing existing Gun Metal Gate or Sluice Valve of any size by filling of suitable Metal including necessary Lathe Works for Threading, Re-fixing the same at Site(s), complete all as specified and as directed.
M&L for repairing existing Stainless Steel Spindle of Sluice Valve 80/100mm bore (dia) by filling of suitable Metal including necessary Lathe Works for Threading, Re-fixing the same at Site(s), complete all as specified and as directed.
M&L for repairing existing Stainless Steel Spindle of Sluice Valve 150/200/250mm bore (dia) by filling of suitable Metal including necessary Lathe Works for Threading, Re-fixing the same at Site(s), complete all as specified and as directed.
M & L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M & L preparing old painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S&F in repairs Pressure Gauge with Nipple 0-14 kgs rating complete all as specified and as directed.
Burning out lead joints in position of cast iron pipes, fittings and re-making using old retrived lead complete all as specified and directed for following size of pipes :- Note :- In case, inadequate lead is retrieved from burning out, for remaking joints, additional lead required shall be measured and paid separately as "Supply only".
100mm bore
150mm bore
Supply only run lead complete all as specified and directed.
S&F in repair Cast Iron Sluice valve of Class PN-1.6 long body type, heavy duty, ISI marked (IS 1538) flanged end with iron wheel and brass spindle including 3 mm thick rubber gasket joints, nuts, bolts etc complete all as specified and directed for the following size of pipes :-
80 mm bore
100 mm bore
150 mm bore
250 mm bore
S&F in repair Cast Iron non-return valve, Class PN 1.6, heavy duty, ISI marked (IS 5312), flanged end including 3 mm thick rubber gasket joints, nuts, bolts etc complete all as specified and directed for the following size of pipes :-
100 mm bore
150 mm bore
Supply only Anti-Scalent Chemical (Consumable) (as approved) for Preventing Scaling of Membrane of Plant complete all and as directed by Engineer in Chrge of (Make: ION EXCHANGE/THERMAX)
Supply only Micron Filter of size 4 Inch dia x 20 Inch Length with Filter capacity upto 1 micron (as approved) and Fixing-in-repairs, complete all as specified and as directed.
Supply only Membrane Module of size 8040 suitable for 5000 Litre Central RO Plant (as approved as existing) and Fixing-in-repairs, complete all as specified and as directed. MAKE : TORRAY/ ION EXCHANGE/ DOW
Scrubbing, cleaning etc thoroughly of PVC water tank 5000 ltrs capacity kept on staging including removal of sludge, sediments, mud or any other deposits, cleaning and flushing with chlorine water/bleaching powder and writing the date of cleaning with white enamel paint on outside of tank complete all as specified and directed.
Taking up /down 150 mm bore CI/DI water mains and connections/fittings of any type from trenches /walls/floors/(or any other location) for replacement /reuse in old/new location/diversion by burning out /removing of lead joints/tyton joints/rubber gasket joint complete all as specified and directed. (Note: Earthwork shall be measured and paid seperately)
Supplying, laying, jointing and testing Ductile iron (DI) pipe of size 150 mm dia with spigot/ socket ends centrifugally cast type K-9 ISI marked in any length, laid in trenches and connected to existing pipe line as required at site complete with jointing material (Rubber tyton joints) all as specified and directed (Note- Excavation, earthwork , fittings shall be measured and paid separately )
M&L for Repairing damaged/broken CI/DI/GI/Thin Wall Pipe Line of Size 80/100mm bore (dia) including loose Collar, Lead/Clamp Joint required to repairs the damaged/ broken Pipe Line to Stop the Leakage including necessary Earth Work as per Site requirement, complete all as specified and as directed.
All as per item No. 29 above but of size 150/200mm
Demolition complete damaged/broken sluice valve pit of any size including MS cover with angle iron frame and surplus material/soil disposed off to a certain distance not exc 50mts completed all as specified and directed by Engineer-in-Charge.
S&F in repair Bib tap, fancy type cast copper alloy with chromium plated, heavy duty of size 15mm incl taking down old u/s bib tap all as specified and directed by the Enginee-in-Charge.
All as per item No. 32 above but of size 20 mm.
All as per item No. 32 above but of size 25mm.
Routine Maintenance & Operation of CENTRAL REVERSE OSMOSIS TYPE WATER TREATMENT & PURIFYING PLANT having capacity of delivering Pure, Safe and Healthy Drinking Water 5000 LITRE PER HOUR by removing dissolved Solids like Calcium, Magnesium, Sodium Bicarbonate, Chlorides, Sulphides, etc. in Water by 90-95% and reducing Harmful Minerals like Arsenic, Fluorides, Lead, Bacteria, etc. and to bring Water Hardness Level to Safe Drinking Water Limits, Skid Mounted type including Routine Checking of Metering Equipments like Voltmeter, Ammeter, Flow Meter, Conductivity Meter (TDS Meter) PH Meter, Pressure Meter, etc. alongwith Routine Maintenance of RO Water Supply Pumping Set 3.0 HP capacity Each, complete all as specified and as directed. NOTE :- (a) The Contractor shall engage One Experienced Technician who will visit at an interval of EVERY 30 DAYS and/or as and when required/directed by the Engineer-in-Charge to examine and repair the Plant. The Technician will report to the JE E/M and Engineer-in-Charge for his Every Visit, failing which no Payment will be allowed to the Contractor. (b) The Plant shall not remain Non Operation more than 8 HOURS in any case either due to Break down or Maintenance otherwise a recovery @ Rs. 300.00 PER HOUR shall be charged from the Contractor beyond 8 HOURS for Non Operation of Plant. (c) The Quoted Unit Rate includes fixing only for non workable major parts as and when required basis. (d) The Quoted Unit Rate includes the Cost of Chemicals as recommended by Manufacturer for Flushing/Cleaning the System. (e) The Quoted Unit Rate is inclusive of Periodical Back Wash or as and when required to maintain as per the Treatment Guideline of Plant including Cleaning. (f) The Cost include the replacement of Minor Spares like Washers Nylon/ Lead, Teflon Tape, Bolt & Nuts, Gland Packing, Gasket, etc. other than specifically Priced. (g) Major Spares like Micron Filter, Membrane etc. will be Measured and Paid for separately.
M&L for cleaning of RCC semi under ground sump of capacity 50,000 gallons at main pump house involving the following cleaning process complete all as directed by the Engineer-in-Charge:- (a) De-watering by high pressure submersible pump. (b) Total removal of sludge by section pumps. (c) Cleaning of walls, ceiling and floors by high pressure jet pump of 80-180 bar pressure. (d) Removal of all dirt particles and sludge by vacuum pump specially designed. (e) Anti bacterial treatment of inside of Tank which is effective against all pathogens. (f) Preparation of internal wall & External walls and painting with one coat of weatherproof exterior emulsion paint all as specified as directed by Engr in Charge Note : Entire T&P should be arranged by the contractor at his own arrangements. Onely electric power and water shall be supplied by MES at the stipulated rate. (ii) Date of cleaning shall be written over the outer surface of tank with synthetic enamel paint with lettering not less than 100mm height. Cost of the same is deemed to be inclusive in the quoted unit rate of cleaning of Tank.
All as per item srl No 36 but capacity 100000 Gallons
M&L for Construction of brick masonry valve pit of size 1200mm x 1200mm x 1200mm (internal dimension) with PCC (1:4:8) type D2 in sub base, brick work in cement mortar (1:4 ),15mm thick internal plastering in cement mortar (1:4 ) complete with 2 mm thick MS sheet cover with angle iron frame ( 40 x 40 x 6 mm) duly painted with two coats of black bituminous paint over a coat of Red oxide primer including 2 nos of hinges with locking arragement including all necessary excavation and earth work PCC work complete all as specified and directed.
All as per item No 38 but Valve Pit of size 90x90x90cm complete all as specified and directed
M&L cleaning of RCC Over Head water tank of capacity 50,000 gallons at main pump house, Dumra PH and near AF school at any height including following cleaning process complete all as directed by the Engineer-in-Charge:- (a) De-watering by high pressure submersible pump. (b) Total removal of sludge by suction pumps. (c) Cleaning of walls, ceiling and floors by brushing & high pressure jet pump of 80-180 bar pressure. (d) Removal of all dirt particles and sludge by vacum pump specially designed. (e) Anti bacterial treatment of inside of Tank which is effective against all pathogens. (f) Preparation of internal wall & External wall for painting and painting with one coat of weatherproof exterior emulsion paint all as specified as directed by Engr in Charge. Note : (i) Entire T&P should be arranged by the contractor at his own arrangements. Proper safety precaution of labours employed shall be taken by contractor . Only electric power and water shall be supplied by MES at the stipulated rate. (ii) Date of cleaning should be written over the outer surface of tank with synthetic enamel paint with lettering not less than 100mm height. Cost of the same is deemed to be inclusive in the quoted unit rate of cleaning of Tank.
shiv shanker enterprises
Ajay Enterprises
AGGARWAL CONSTRUCTION CO.
Aditi Formation Company
YESH BUILDERS
STAR CONSTRUCTIONS
AMBIKA ENTERPRISES
BHATIA ENTERPRISES
RAGHAV ELECTRICALS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .