Construction 3080 MT capacity godowns including arch shaped galvalume sheet roofing, office block, roads and E.I. work at SWH, Kalanwali. (District Sirsa)

Amount

Extra for cost of plasticizer used in gutter beam for RCC work complete as per DNIT.

P/F CP brass bib cock 15mm dia Jaguar make model No. 39307 complete as per DNIT

P/F CP brass angular stop cock 15mm dia Jaguar make model No. 39053 complete as per DNIT

P/F PVC flexible tube connection 18" long best quality complete as per HSR

P/L Antitermite treatment complete as per DNIT

P/F PVC flexibli tube connection 18” dia best quality complete as per DNIT

Providing and fixing AC strips 40 x 6 mm complete as per DNIT

Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account

P/F Chromium plates with steel railing complete as per DNIT.

Providing and fixing CP brass towel rail 600mm long as per DNIT

P/F English seat wall hanging jaguar or other reputed make with concealed cistern as per DNIT

WBM 3” thick compacted using 53 to 22.4mm stone metal laid in one layer complete in all respects as per PWD specification.

WBM 6” thick compacted using 63 to 45mm and 53 to 22.4mm stone metal laid in two layer complete in all respects as per PWD specification.

Providing and fixing stainless steel wire gauge as per DNIT.

Providing & fixing peg stay including necessary screws complete as per DNIT.

Providing & fixing MS handle including necessary screws complete as per DNIT.

Supply of steel gates 6’X8’ size as per design & drawing of the Corporation.

Fixing of steel gates in gate size 6’X8’opening including cost of cement concrete 1:1½:3

Providing and fixing kotah stone strips 20to 25mm x50mm in flooring as per DNIT.

Providing and fixing marble stone strips 13to 17mm x50mm in flooring as per DNIT.

Labour for removal of P.H/ Saintary fitting & sewrage system with water tank as per DNIT

Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.

Providing and laying PVC socket 100mm dia for rain water pipe of ISI make

Providing & laying concertina coil of galvaniged iron with angle “Y” shape on b/wall as per DNIT

Providing and fixing finishing of surface using mechanical floater/ dic complete as per DNIT

Providing and fixing poly carbonate sheet 2 mm thick of lexan make complete as per DNIT.

P/L Dewatering system of C.C by vacuum vibrator surface trowel fix in complete complete as per DNIT.

P/F galvalume/Zincalume steel sheet verandah roofing 0.50mm thick (Total thickness) (only ±0.02 mm tolerance allowed) with tensile strength 550mpa, with coating mass @ 150gm/Sqm, of approved blue colour (RAL-5012) fixed self screw-sloping roof without curvature of TATA BlueScope , Jindal steel works(JSW) , Dongbu Steel Co. ltd(Korea) & Bhushan steel making with coating of 55% aluminium, 43.5% Zinc and 1.5% silicon as per IS code- 15961, 15965 and all other relevant Indian codes as per specification, drawing and design of the Corporation.

P/F arch shaped galvalume/Zincalume steel sheet roofing 1.00 mm thick (BMT)(only ±0.02 mm tolerance allowed) and total thickness 1.075mm (only ±0.02 mm tolerance allowed) with tensile strength 350MPa coating mass 150 gram per sq mt. etc of TATA BlueScope , Jindal steel works(JSW) , BlueScope (Australia), Thyseen Krupps (Germany), Dongbu Steel Co. ltd(Korea). Corus steels (U.K.), Dofasco steel (Canada), Bethelehem Steel (U.S.A) making with coating of 55% Aluminium, 43.5% Zinc and 1.5% Silicon as per IS code- 15961, 15965 type-III, 513, 16163 and all other relevant Indian codesas per specification, drawing and design of the Corporation.

P/F CP brass jet system complete as per DNIT.

P/F Gunmetal gate valve ¾” dia complete as per DNIT.

P/F½”dia GI pipe B-class including cost of special complete as per DNIT.

P/F PVC floor trap 4” heavy complete as per DNIT.

Providing and fixing peg stay 200mm as per DNIT

Providing and fixing mosquito zali shutters as per DNIT

P/F 4” dia PVC pipe complete as per DNIT.

P/F 3” dia PVC pipe complete as per DNIT.

(ii) Extra for tinted glass complete as per DNIT.

P/F ¾’ dia GI pipe B-class including cost of special as per DNIT.

Providing and fixing angle cock 15mm internal dia jaguar make as per DNIT

Providing and fixing PVC flush pipe with adopter complete as per DNIT

Providing Executive table 6'x3' as per drawing and design of corporation. as per DNIT

Providing Office table 5'x2.5'as per drawing and design of corporation. as per DNIT

Providing Executive Chair for Manager as per drawing and design of corporation. as per DNIT

Providing office chair for staff as per drawing and design of corporation complete as per DNIT

Providing visitor's chair as per drawing and design of corporation complete as per DNIT

Providing big Almirah as per drawing and design of corporation complete as per DNIT

Providing computer table 4'x2' as per drawing and design of corporation complete as per DNIT

Providing Computer operator's chair as per drawing and design of corporation complete as per DNIT

Providing three seater for class IV as per drawing and design of corporation complete as per DNIT

Providing Inverter 800W Excide battery complete as per DNIT

Supply and Fixing of Street Light 70 watt Crompton Make. (Havells/Crompton/Philips) complete as per DNIT

P/F of LED Bulb 15W complete as per DNIT (Havells and Philips, Syska)

P/F of LED tube light fitting 40 w 1X4’ with tube 40w(Havells/Philips complete as per DNIT)

S/E of ceiling fan 48” double ball bearing make (Havells, Fusion, Model/Areole new complete as per DNIT

S/E of exhaust fan 12” Fresh Air Heavy Duty (Havells, Crompton/Bajaj) complete as per DNIT

3- Pin Top-15 Amp (Anchor/SSK Make) complete as per DNIT

Bidder Name

Amount

Naresh Jain