Refurbishment and other miscellaneous civil works of newly modified accounts works building at GSO NRB BARC

Amount

Providing arranging in position and fixing L Shaped Work station consisting of Main table with side table of dimensions as mentioned below biult in 20 mm thk. Marine plywood including side unit, pencil tray, pullout tray, footrest. All drawers to be in plywood with 20 mm in front & 12 mm thk. in rear & sides , bottom in 6 mm thk. Plywood Internal surfaces to be laminate . Table tops, side table unit fronts & sides to be finished in 20 mm thick plywood as per drawings. The front modesty panel etc. shall be finished as per drawings & instructions of the EIC. All beadings, mouldings & exposed woodwork to be in teak wood or PVC Edge bending (As per requirement of EIC) Foot rest shall be made out of 20 mm plywood & shall be finished with approved shade and colour laminate. All TW molding and bottom of tables shall be finish in 3 coats of French polish. All the tables shall have keyboard drawers to accommodate key boards & mouse wherever necessary as per drawing. Rate include of all hardware, sliding door casters, drawers with multilock as per technical spcification mentioned in Tender Book fitted on drawer channels,s.s. handles,etc . All exposed woodwork to be finished with 3 coats of melamine polish all internal surfaces finished with 0.8 mm thick laminate the exposed surfaces shall be finished with 1.5 mm thick Laminate of approved shade & colour. etc. complete as per drawings ,specifications and directions of engineer in charge. Technical Specification - Metal Tray - Tray is made of 0.9 mm thick MS Sheet CRCA. (Size: 482(W) x 270(D) x 18(H) MM). Single Extension Ball Slide assembly - 350 mm (Long) x 11.8 mm (Thk) Single extension (Stroke: 230 mm) Ball-slide Made of combination of 1.2/1.5 mm thk roll-formed CRCA Steel sheet. Mouse Tray - Optional retrofit mouse tray is provided which could be fitted at right hand or left hand as per user requirement. Mouse tray (Size 210 x 210) is made of 0.9 mm thick MS CRCA Sheet. Technical Specification- L : 225-330mm (adjustment), W : 225mm, H : 330mm (MS 14BG, Powder Coated 50-60 MICRON DFT)

Workstation having main table 1500 mm x 750 mm x 750 mm (contains 3 drawer storage unit at main) and side table of 1200mm x 650 mm x 750 mm (Side table contains 2 shelves with front shutter and CPU place)

Workstation having main table 1500 mm x 450 mm x 750 mm (contains 3 drawer storage unit at main) and side table of 1100mm x 600 mm x 750 mm (Side table contains 2 shelves with front shutter and CPU place)

Providing arranging in position and fixing Low level wooden partition with aluminium framing made up of two numbers of 12mm Marine ply wood on both side & shall be finished with 1.5mm thick laminate of approved shade and colour , all beadings, mouldings & exposed woodwork to be in teak wood complete all as per

Providing and fixing in position Cup board Unit of size mentioned in sub items, with sides, top, bottom shelves and shutters made out 20 mm marine plywood & 6 mm thick teakwood leaping/PVC Edge bending (As per requirement of EIC) with edge moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with polish. Hand wares such as heavy duty hinges, brass body locks with extra-large group key of approved quality, magnetic ball catchers, handles, tower bolt etc. All exposed woodwork to be finished with 3 coats of melamine polish (If necessary) & all internal surfaces finished with 0.8 mm thick laminate the exposed surfaces shall be finished with 1.5 mm thick Laminate of approved shade & colour. etc. complete as per drawings ,specifications and directions of engineer in charge. Note-Mode of measurement -Front elevation area

Cupboard with dimension 1200mm x 500mm x 2400mm 2 vertical partition & 6 horizontal partition, each partition will have 2 leaf shutters each.

Providing and supplying on site medium back 360 degrees revolving type and tilting chairs with ergonomically contoured backrest ,upholstered with foam laminated mesh fabric of approved colour , five legged high quality nylon base and PU twin wheel casters having synchro mechanism with 4 position locking , seat slide mechanism with 3 D armrest . The Chairs shall be of High Resillence (H.R.) foam for optimum seating comfort with approved fabric colour etc. complete as per drawings , specifications in tender book and directions of engineer in charge .

Mid back

High back

Providing and fixing of good quality vanishing blind cotton fabric made curtain of approved colour and design including fixing with required accessories provision for removing etc. complete as per instruction of E.I.C.

Providing and Fixing 9mm thick PVC Planks for false ceiling & Wall Cladding of approved make, colour and patterns having proprties of Weather resistant,Chemical Resistance ,Dampness Resistance , Anti-UV, anti-impact with high density , Water-proof, termite-proof, non-toxic, non-formaldehyde, environmental friendly, high durability & Easy installation with low maintenance cost , colour and pattern all complete as directed by Engineer-in-charge. SPECIFICATIONS THICKNESS- 9mm SIZE- 1 fit X 10 fit or 1 fit X 12 fit PATTERN & COLOURS - Teak Wood, Pine Wood ,White, etc. ACCESSORIES - Connecting Beading: 10ft & Perimeter Beading: 10ft APPLICATIONS- False Ceiling & Wall Cladding

Providing and sticking of UV resistance PVC sun arrester film of approved colour over glass window including pesteing etc. complete as per instruction of E.I.C.

Providing polycarbonate sheet cladding using 6mm thick multiwall poly carbonate sheet of approved make , fixed on frame work , fabricated with powder coated M.S square tube of size 50x20x2mm for purlins including providing and fixing matching colour powder coated 50mm wide Aluminium strips in horizontal & vertical member along with PVC gasket, fixed with S.S screw at joint of sheet, including cost of all materials, labour, scaffolding for fabrication and fixing of frame work and polycarbonate sheet cladding in position of required size etc. Complete as per manufacture's specifications, drawing and as directed by Engineer In charge.

Designing, supplying and installing semi-unitized, minimum three barrier system, structural glazing framework including mullions, transoms, gutters, sills, trims, sashes for vision and spandrel panels with anodized aluminium extrusions satin finished (Min 25 Micron) in approved colour, stainless steel brackets / clamps, stainless steel bolts, nuts, washers and shims, silicon / EPDM gaskets, drainage provisions, weather seals, anodised aluminium coping, aluminium flashings and seals at all interfaces with building structure, openings and cladding system etc. on linear as well as curved surface in plan all complete as per approved shop drawings and specifications .Designing includes structural design of aluminium frame work, joints, brackets,fasteners, structural sealant etc. The rates shall include all labour, scaffolding, machinery,material, test, welding MS to MS / SS, chipping of walls beams, columns, rectification if required etc. all complete as per approved shop drawing and specifications. Note:Structural glazing framework shall be measured overall on the external faces as fixed on site (Outer to outer of frames) Double glazed fixed panel, double glazed openable panels, single glazed fixed panel, single glazed openable panels, shadow boxes and sunshade louvers shall be measured made by their respective item Structural glazing system to be fixed on RCC structure / steel structural steel etc Minimum consumption of aluminium extruded sections in main frame and subframe / sashes put together shall not be less than 6.5 kg / Sq.M

Supply & installing hermatically-sealed 6-12-6 mm double glazed fixed vision panel units of approved make comprising of an outer heat strengthened SGG cool lite ST-120 Metallic Blue glass / Sterling Silver or Green or approved equivalent shade and reflective tinted float glass coated on surface #2 and an inner toughened clear float glass, spacers, desiccants, with moisture absorbing compound (silica gel), primary and secondary seals etc. all complete as per approved shop drawings and specifications.

Providing and Fixing 3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp prrof base using rubber based adhesive of approved quality and as per technical spcification mentioned in Tender Book including levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade.

SVJ INOVABUILD PRIVATE LIMITED (BID ID -3139725)