Repair of damaged shed floor, building and other works of the compressor building situated on the Main dam

Amount

Earth work in foundation in dry soil including excavated and disposal up to 1.00 km including all labour, T&P etc for complete work all as specified and directed by Engineer in-charge.

Dismentaling cement concrete including all cost of material,labour,T&P etc. Complete of work all as specified and directed by Engineer in-charge.

Dismantling Roof of G C sheet for tin shed Complete of work all as specified and directed by Engineer in-charge.

Dismantling old and damaged RR stone masonary including stacking with cost of all labour T & P etc. for cmplition pf work all as specified and directed by Engineer in-charge.

Dismantling doors, windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Complete of work all as specified and directed by Engineer in-charge.

Providing and laying Plain Cement Concrete in 1:4:8, including all T&P and labour etc for completion of Work all as specified and directed by Engineer in-charge.

Providing and laying cement Concrete in 1:2:4, including all T&P and labour etc for completion of Work all as specified and directed by Engineer in-charge.

Providing and laying factory made 80 mm thick C.C. paver block confirming to IS code 15658(2006) and M-35 grade with approved colour design and pattern chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Providing and fixing chaukhat of size 50x50x 8 mm and 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer i/c cost of all material, labour, T&Petc. Complete of work all as specified and directed by Engineer in-charge.

Providing corrugated 1.00 mm thick with zinc coating G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

RR Stone Masonry in 1:4 cement sand Mortar with old boulder including cost of all material ,labour T & P etc. for Complition fo work.

Wiring point for light Pont/fan point /exhaust point fan point /Call bell point with with 1.5 sq.mm. FRLSH PVC insulated core copper conductor single core in surface /resessed medium class PVC conduit pipe with piano type switch phenilic laminated sheet suaitable size M.S. Box and earthing the point 1.5sq mm FRLS PVC insulated conductor single core cable etc as required Complition fo work all as specified and directed by Engineer in-charge.

Provding and fixing 50 watt LED light Havells, Crompton, Philips or equvalent make including the cost of all material , labour, T & P etc for Complition fo work all as specified and directed by Engineer in-charge.

Supply and fixing two core 2.5 Sq mm Cable with copper conductor Havells Finolux, Polycab or equvalent with PVC condidute pipe Including cost of all material, labour and T&P etc. Complete work Complition fo work all as specified and directed by Engineer in-charge.

Supply and fixing three core 6 Sq mm Cable with copper conductor Havells, Finolux, Polycab or equvalent with PVC condidute pipe Including cost of all material, labour and T&P etc. Complete work Complition fo work all as specified and directed by Engineer in-charge.

12 mm thick cement plaster of mix in 1:4 ( 1 cement: 4 coarse sand ) on brick masonry . i/c all cost of material,dismetling, labour,T&P etc. complete of work all as specified and directed by Engineer in-charge.

Material and labour for Synthetic enamel paint of approved brand (asian/nerolac/berger/jsw) in two coat on old suface with one coat of approved brand of primer including preparation of old surface complete all as specifiaed and directed by Engineer-in-Charge .

Material and labour for exterior wall painting with acrylic emulsion paint of approved brand (Asian/Nerolac/Berger/Birla) in two coat on prepared surface with one coat of approved brand of primer including preparation of old surface complete all as specified and directed by Engineer-in-charge

Material and labour for interior wall painting with acrylic emulsion paint of approved brand (Asian/Nerolac/Berger/Birla) in two coat on old surface with one coat of approved brand of wall puty (Berger/Birla/J.K) including preparation of old surface complete all as specified and directed by Engineer-in-charge

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 cement and coarse sand with cement colour slurry, joining and polished i/c all cost of material,labour,T&P etc. Complete of work all as specified and directed by Engineer in-charge.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides copmlete all as per direction of Engineer-In-Charge.

Providing and fixing 450 mm long towel rail with total length of 495 mm wide and effective height of 88 mm, weighing not less than 170 gms complete in all respect direction of Engineer-In-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps complete in all respect direction of Engineer-In-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete in all respect direction of Engineer-In-Charge.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore complete in all respect direction of Engineer-In-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 40 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete

Providing and fixing C.P. brass toilet paper holder complete in all respect direction of Engineer-In-Charge

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank complete in all respect direction of Engineer-In-Charge

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore complete in all respect direction of Engineer-In-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete in all respect direction of Engineer-In-Charge.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. complete of work all as specified and directed by Engineer in-charge.

Providing and fixing G.I pipes ( 25 )mm complete with G.I fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall etc. complete of work all as specified and directed by Engineer in-charge.

Providing and fixing 25 mm nominal bore G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required complete in all respect direction of Engineer-In-Charge.

Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete in all respect direction of Engineer-In-Charge.

Providing and fixing G.I pipes ( 15 )mm complete with G.I fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall etc. complete of work all as specified and directed by Engineer in-charge.

Providing and fixing 15 mm nominal bore G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required complete in all respect direction of Engineer-In-Charge.

Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete in all respect direction of Engineer-In-Charge.

RANA FABRICATORS (BID ID -4853529)