Special repair to Offr Md Accn Bldg No.P-279 and P-319 (08 Qtrs) in Vinay Rao Chauhan Enclave of MB Area under GE (W ) Jabalpur

Amount

Taking up or down, 20mm bore, existing steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed

Taking up or down, 25 mm bore, existing steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed

Dismantling water tanks and removing from site, capicity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed

Dismantling water tanks and removing from site, capicity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter without taking off shutter from the frame and removing from site.

Taking down chowkats and frame n.exc 1.5 Sqm each (Door/window/Ventilator) including shutters without taking off shutters from the frame and removing from site.

Taking down shutter of any description n.exc 1 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site.

Taking down shutters of any description n.exc 1.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cm in thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated) steel sheets/fibre sheet in roof covering complete all as specified

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,complete all as specified and directed

Material and labour for 15mm thick (in two layers 10mm+5mm) cemet plalster in CM 1:4 over brick wall / concrete surfaces, second layer mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. (Note-WPC will be measured and paid for separately as "Supply only".)

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC(1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and direcated (Note : WPC shall be measured & paid for separately as "Supply only".)

M&L for Complete removal of existing water proofing treatment from roof and providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 @ 0.3 Kg/Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufacturer's instructions. (v) Applying two coat of bituminous based aluminium paint @ 0.20 Kg / Sqm in two coats over bitumen layer as per Manufacturer's instruction . (Note : application including sides lap,over laps shall be provided not less than 10 cm and joint sealed with torch as per manufacturer's instructions and as per particular specifications complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (20mm graded stone aggregate)as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,Hold fast and similar works water troughs and the like including weathering, slightly rounded for chamfered angles including necessary formwork complete all as specified and as directed

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good complete all as specified & directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105 x 60 mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good complete all as specified & directed.

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match as in cupboard door shutters complete all as specified and directed.

S & F Factory made internal PVC door frame of size 50x47mm single riveted, made out of extruded 5 mm PVC foam sheet, mitred cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed .

S & F Providing and fixing 30 mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed .

M&L for anodized aluminium powder coated (minimum thickness of powder coating 50 micron) three track sliding window, frame side top and sides of size 92x31.75x1.5 mm (Section No. 20831), bottom size 92x31.75x1.5 mm (Section No. 20832) and shutter top and bottom size 40x18x1.55 mm (Section No. 20736) and sides (handle) of size 40x18x1.55 mm (Section No. 20738) and lock side shutter frame of size 40x18x1.55 mm (Section No. 20737) including rubber gasket, beading and locking arrangement including making good the disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion complete all as specified and directed. ( Note :Glazing is deemed to be included in the quoted rate of contractor . )

M&L for anodized aluminium powder coated(minimum thickness of powder coating 50 micron) ventilator louvers type, frame top and bottom of size 31x42x1.6 mm (Section No. 20558), rectangular tube of size 40x20x2 mm (Section No. 14019) and middle vertical of size 42x46.20x1.6 mm ( Section No. 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90 mm (Section No. 19360) including rubber gasket, beading and locking arrangement including making good the disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion complete all as specified and directed. ( Note : Glazing is deemed to be included in the quoted rate of contractor.

M & L for timber, 2nd class HW, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 13cm but n. exc 25sqcm.with white sunmica, Including dismantling existing, complete all as specified and directed.

S & F in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type, with white colour sunmica inner side and colour glossy sunmica outer side as in cupboards, kitchen cabinet, pelmet box and in similar works complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F Door Seal rubber door size etc, complete all as specified

S&F mild steel, 300 mm long ordinary helical door spring including roller and roller plate complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 100mm long Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 150 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed.

S&F 75mm long Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 125 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and directed.

S&F in repair 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. fixed in floor complete all as specified and directed.

M&L for Machine cut cudappa stone slab 20-25mm thick as in Shelf/cooking platforms, and like including cutting and fixing over and including 15mm thick cement screed base in CM (1:4) and jointed to support granite top complete all as specified and directed.

M&L for Granite (zed Black) Work 18 to 20 mm thick (table rubbed and polished ) as in cooking platforms, and like, laid over and including 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab complete all as specified and directed.

M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 15 mm thick screed bed of CM (1:4) , as in tread and riser of staircase,steps , jambs, pillars, window- cills, complete complete as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete as specified and as directed .

M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed.

M & L for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20 mm thick Cement mortar (1:4) screed bed, complete all as specified.

M & L for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished,exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick Cement mortar (1:4), complete all as specified.

M&L Glazed ceramic colour tiles in vertifical surface 450x300x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 10mm thick renderting/ backcoating in cement mortar 1:4 complete all as specified and directed.

S & F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified.

M&L for Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F in repair mild steel, framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc. conforming to Fe 290 Gde E-165, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing ,including dismantling, complete all as specified .

S&F in repair 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, including dismantling, all as specified and directed.

S&F in repair mild steel, framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) conforming to Fe 410 W Gde E-250 Quality A, including distance pieces, cleats etc all as specified and directed.

S&F in repair mild steel, Rolled sections as in Post and struts, conforming to Fe 290 Gde E-165, fixed with angle cleats or other connecting plates

S&F in repair Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm (AZ-150) thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection, hard standing and similar works, complete all as specified and as directed.

M & L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase, Hard standing and similar works complete all as specified and as directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per Srl item No 70 above but except brick (Note : Old serviceable bricks retrieved against dismantling shall be re-used)

Disconnecting existing tanks,Capacity exc 500 ltrs and n exc 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks capacity 500 ltrs, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position including cover complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks capacity 1000 ltrs,ISI Marked,(cylindrical vertical with closed top) hoisted and fixed in position including cover complete all as specified and directed

S&F in repair 25 mm dia Ball brass valves, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of New plastered wall surfaces and including applying 1 mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over resistant priming paint complete all as specified and as directed .

M & L for complete removal of existing treament and preparation of old plastered wall surfaces and including applying 1mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed.

M & L preparation of New plastered ceiling surfaces and including applying 1mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over resistant priming paint complete all as specified and as directed.

M & L for complete removal of existing treament and preparation of old plastered ceiling surfaces and including applying 1mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed .

M & L for preparing new or previoussly untreated ceiling and applying three coats of white wash complete all as specified.

M & L for complete removal of existing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified.

M&L for Preparation of new wall surface or complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacturer's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed .

S&F in repair vitreous china wash basin white flat back size 550x400 mm including,pillar tap, 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including all necessary fittings all as specified and directed by Engr-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including all necessary fittings complete all as specified.

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets all as specified and directed.

S&F, in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 20 mm bore of pipe complete all as specified and as directed.

S&F in repairs 15mm bore dia angular stop valves chromium plated fancy type , screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S & F in repairs CP shower rose 150 mm round with arm and flange including fixing to steel pipe fixed in repairs as directed

S & F in repair PVC connections 15mm dia with PTMT nut on both ends and washers 450mm long all as specified and directed.

S&F in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 20 mm bore of pipe complete all as specified and as directed.

S&F in repair,15 mm dia ,Pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S&F in repair towel rail 450 mm long of Brass CP fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms), complete all as specified and as directed.

S&F in repair for stainless steel kitchen plate rack SIZE (24"X36"X10") three tier, ISI marked, including all fittings complete all as specified and as directed.

S & F, in repair, 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches,floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.

S & F in repairs PVC (SWR) Pipes single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified.

S & F in repairs PVC (SWR) bends 110 mm dia bore any radius with access door all as specified and directed.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal, complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal, complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal, complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal, complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M & L for Water Proofing Treatment of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after cleaning the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturer's specifications and directions. Make : Dr Fixit/Pidilite or equivalent as approved by GE

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

Supply and fix in repairs elegent mirror PVC Cabinet of size 475x600x150mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed .

S & F of CP jet spray fitting to EWC or wall with screws and including two way CP stop cock 15mm dia complete all as specified and directed .

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair wall mixture three in one with provision of hand shower and including CP hand shower with Stainless Steel braided connection pipe and complete accessories complete all as specified and directed .

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair towel ring of CP fixed with and incl CP brass screws and wooden / plastic cleats (min wt 90 gms), complete all as specified and directed .

M&L for 60mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles conforming to IS 15658-2006, M-35 grade of concrete, size and shape as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Demolition and breaking up 150 mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Supply, laying and jointing 150 mm nominal bore DWC (HDPE double wall corrugated), socketed including concrete bed cement morter 1: 3: 6 type C-2 to drain pipe including packing under and haunching against the sides of the pipe and sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-8 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Cement concrete tiles 20 cm x 20 cm x 20 mm thick with grey cement and pigment complete all as specified and directed.

M&L for Liquid water proofing compound complete all as specified and directed .

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatmen of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Dismantling posts or struts (wood, steel or R.C.C.) any section,in concrete, brick work masonary including taking out embedded portion and making good disturbed ground.

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface in hard dense soil.

Dismantling chain link fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F,Round Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified .

INTERNAL ELECTRIFICATION

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed.

Taking down carefully Main switch and Distribution boards any make and size .

Taking down the ceiling fan/exhaust fan in situ and depositing it in MES store complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size complete all as specified and directed .

M&L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed.

One light point/Bell point controlled by one switch 5/6 Amp.

One fan point controlled by one switch 5/6 Amp.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 146 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed .

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed .

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed .

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed .

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed .

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed .

M&l for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 12 Watt made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall complete all as specified and directed.

Supply & Fixing in repair Smart bright Batten Series, LED luminaire using LED 22 Watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl).

S & F in repair of LED Decorative /mirror light fitting 10 Watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed .

S&F in repair Bulk head endura LED light fitting complete with and including 10 Watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type, with and including GI pipe 40 mm dia, medium grade with bracket with aluminium paint complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed. .

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 V 50 Hz single phase 26-30 Watt rated current 0.16 amp,pf 0.98, 370/360 rpm, air delivery 220m3 rated service value 629m3/min/watt, no of blades three, type of blade leaf 1.05 mm thick aluminium sheet two nos bearings including connecting wire complete with all as required and directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 4 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed .

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed .

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed .

Supply & Fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar triple pole and neutral vertical 415 V, 4 Ways, double door type,complete all as specified and directed. With Incoming MCCB of 100 Amps Capacity

Supply and fixing in repair Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fixing in repair Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, made of sturdy engineering plastic, complete with louver shutters including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fix in repair Geyser 25 ltr with fitting arrangements all as per required and directed . (Note:- Old Geyser to be taken down and deposited to MES yard to JE E/M)

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc complete all as directed.

Supply and lay DWCP pipe OD 50 mm , ID 38 mm complete all as required and directed by Engr-in-Charge

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. ( Note : Punned thickness shall be considered for payment purpose)

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with sub class ‘B’ fly ash bricks laid dry flat complete all as specified and directed.

Schedule of credit amount of Rs 2,26,730.00 to be deducted during AOC

M/s M S Sharma and Co. (BID ID -3382154)

M/S Modern builders (BID ID -3372530)

DOBARIA BUILDCON (BID ID -3374062)

RAM ASSOCIATES (BID ID -3381490)

Tiki Water proofing Co (BID ID -3380659)

Suchit constructions (BID ID -3373511)