8803/GWL/E8 SPECIAL REPAIR TO BLDG NO T-145 IN THE AREA OF AGE B/R-I AT MORAR CANTT UNDER GE GWALIOR

Amount

Dismantling floor, hearth or wall tiling,stone slabs,,coocking plateform slabs including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L, 25mm thick PCC 1:2:4 type BO (using 12.5 mm graded BT stone aggregate) as in leveling course complete all as specified and directed .

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

S&F for Non Skid Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for Non Skid Ceramic, joint free, coloured tiles 8mm to 10 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Taking down cement or cement lime plaster incl wall tiles, any description, on brick ,stone and concrete surface walls including chhajja of any floor and roof projection etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L, 15 mm thick rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and smooth complete all as specified and directed.

M&L, rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces including chhajja's at any floor, parapet and projection of roof, mixed with WPC, finished fair and smooth complete. (WPC shall be measured and paid separately)

M&L, rendering 10 mm thick in cement mortar 1: 3 on fair faces of or concrete surfaces as in ceiling surface finished fair and smooth complete all as specified and directed by Engineer in Charge.

M&L, applying two coats of distemper, oil emulsion white or tinted over and including a layer of wall putty @ 1.20 Kg /Sqm including preparation of newly plastered surface complete all as specified and as directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrapping or any other means, includind removing vegetable/plants root from walls/chajja's and applying two coats of distemper, oil emulsion white or tinted over and including a layer of wall putty @ 1.20 Kg / Sqm complete all as specified and as directed.

M&L, applying two coats of cement base paint including preparation of newly plastered surface of walls complete all as specified and as directed.

M&L, applying two coats of cement base paint including preparation of newly plastered surface of walls complete all as specified and as directed.

M&L, applying 2mm thick putty on walls complete all as specified and as directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

Taking down ventilators of any type not exc 1 Sqm each complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

Supply only 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS fram welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified .

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F 35mm thick factory made, IInd class hard wood, plain framed, paneled shutter with lock rail and panel of 8mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as [per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick factory made 2nd class hard wood glazed or skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for window and fixed with chowkats, complete all as specified and directed.

S & F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed

S&F 150mm long anodised aluminium handles, cast type complete all as specified and as directed.

S&F 200 mm long mild steel barrel tower bolt stove enameled black with bright bolt each complete all as specified and as directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F 250 mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 mm bolts and nuts four on bolt plate and two on stalle plate complete all as specified and as directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint including preparation of new wooden surfaces of any description over 10 cm width or girth not other wise described, complete all as specified and as directed.

M&L, applying two coats of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth not other wise described, complete all as specified and as directed.

M&L, preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L,old steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L, preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete(unreinforced)in Roofs,floors(other than ground floors),beams,stair cases,landing,chajja,s and similar suspended work complete all as specified and directed.

M&L, PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs/coping/ bed block complete all as specified and directed.

Removing existing water proofing treatment (Brick tile terracing), roughning of concrete surfaces, cleaning of concrete surfaces with water and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified.

M&L, water proofing treatment with using APP Modified pollymeric membrane as per clause 11.43 of SSR 2009 and making good the surface for roof treatment by providing 10 mm thick cement plaster in CM (1:4) with WPC finshed even smooth complete all as direcred and after that roof treatment to be carried out as follows:- (a) 1st coarse : one coat of bitumen primer @ 0.40 ltr/Sqm. (b) 2nd coarse : One coat of bonding material using blown type bituman confirming to IS - 702 of grade 85/[email protected]/Sqm. (c) 3rd Coarse : A layer of APP modified polymeric membrane using atctic propylene polymer modified prefabricated membrane (3mm thick non woven polystar matt complete all as specified and as directed. d) 4th Coarse : One coat of applying aluminium paint surface as approved by GE complete all as specified and directed

M&Lin repair, vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed .

S&F in repair pedestal pan and tap, including connection to drain and flusing pipe and seat cover closed pattern with flat bottam, anc cover and mild steel cromium plated or hinging device etc complete all as specified.

S&F, in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

S&F, in repair wash hand basin vitreous china (flat back) (550 x 400mm ) size including cutting for and pinning in ends of brackets and flush pipe complete all as specified and directed.

S&F Vitreous China urinal flat back fully stall type white ( excluding flushing cistern waste pipe, flush pipe) complete all as specified and directed

Supply only brass chromium plated waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

Supply only pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold".

S&F, in repair Swivel shower of chromium plated of size 65 to 90 mm for fixing with 15mm bore pipe complete all as specified and directed.

S&F PVC Grating Square 100 mm with hinge (openable) complete all as specified and directed .

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F,110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F,110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F,75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F,110mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, provided with access door, complete all as specified and directed.

S&F,75 mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, provided with access door,complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F,110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F, in repair 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair 20 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Taking up and down 15 mm bore steel tubing and connections including cleaning for refixing or to store complete all as specified and directed.

Taking up and down 20 mm bore steel tubing and connections including cleaning for refixing or to store complete all as specified and directed.

M&L, cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc complete all as specified and directed.

S&F, 15 mm bore tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F, 20 mm bore tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old 15 mm bore steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed.

Refixing old 20 mm bore steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed.

S&F rotation moulded polyethylene water storage tank capacity 500 ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old tank and removing to from site complete all as specified and directed.

S&F rotation moulded polyethylene water storage tank capacity 1000 ltr (cylindrical vertical with closed top ) double layer construction , ISI marked , hoisted and fixed in position including dismantling of old RCC tank and removing to from site complete all as specified and directed.

S&F, in repair 15mm dia brass bib cock, cast copper alloy with butterfly handle, screwed down screwed for iron pipe or for brass ferule complete all as specified and directed.

S&F, in repairs PVC conections 15mm dia for wash hand basin and low level flushing cistern of 450 mm length PTMT nuts at ends to connect pipe or sanitary fitting complete all as specified and directed.

S&F, in repair.15 mm bore stop valve cast copper alloy screwed down high pressure with CAPSTAN HEAD handle chromium plated concealed type screwed both ends for iron pipe or for unions and fixed

S&F, in repair 15 mm bore stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe or for unions and fixed.

S&F, in repair LDPE pipes of pressure rating 6Kgf/Cm Square fixed complete incl all fittings to wall and ceilings or in floors of 32 mm bore complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed

M & L for applying treatment on exposed roof portion incl beams , chajjas , slab etc as under :- a) Removing all loose concrete elements & applying acid wash & applying cement slurry mixed with Nitobond / tapcrete all as specified and directed. b ) Inserting drilling holes in the wall /beam by 10 mm dia bars & tuck welding with existing reinforcement @ 0.50 m c/c , nailing wire fabric 50 x 50 mm in the complete area all as spd. c ) M & L 15 MM dubbing coat in CM 1:2 mortar mixed with Nitobond /Tapcrete @ 2 % by weight all as spd

S&F Brass ,Chromium plated Tubular towel rail, 20 mm dia ,'D' type , 60 cm long between flanges , of approved make , complete all as specified.

S & F chicken wiremess with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm all as spd and directed.

S&F soap dish, vitreous china white, approximate size 160x 160 x 90 complete all as specified and directed.

S&F 2nd class HW plain, solid straight chowkat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S & F in repairs PVC waste pipe flexible type 32mm bore complete

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 150 mm dia internal bore Reinforced concrete pipes, class NP3, laid and jointed complete all as specified and as directed.

M&L for Concrete bed to drain pipes for150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-

One light point controlled by one switch.

One fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

For one light point controlled by 2- two way switch

Description all as per item No 102 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, PVC/Polycarbonate, flush button single pole one way 5 Amp complete all as specified and directed.

S&F switch piano, flush button single pole two way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, PVC/Polycarbonate, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, PVC/Polycarbonate, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket out let multipurpose PVC/Polycarbonate, flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F electronic step rotary type fan regulator PVC/Polycarbonate, of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Lamp 09/10 watt complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix BEE 5 star rating energy efficient ceiling fans 1400 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor cable 1100 volts grade from ceiling rose to PVC connector for ceiling fanelectric connection and testing complete all as specified and directed.

Supply & fix Exhaust fans 380 mm sweep with double bearing incl all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

M&L, sub main wiring withThree single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 10 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 10 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole & Including MCCB 63 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F, MCB SP 240 volts, 63 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 Core complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 80 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 50 mm dia complete all as specified and directed.

Supply and fix cast iron sluice valve PN-1.6 conforming to IS 14846/2000, ISI Mark with MS spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts including dismantling of old unserviceable sluice valve fixed at any location of size 80 mm dia all as directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 50 mm dia complete all as directed.

M&L for Construction of valve chambers with 150 mm thick PCC foundation 1:4:8 type D2 using 40 mm graded trap stone aggregate, 230 mm thick brick masonary wall with sub class 'B' bricks builts in cement mortar 1:4 10 mm thick plastering to brick masonary in cement mortar internally and externally upto 15 cm below ground level, 50 mm thick coping with PCC 1:2:4 type B1 using 20 mm graded crushed trap stone aggregate valve chamber frame cover made of mild steel angles of size 40mm x 40mm x 6mm and cover made of 2.5 mm thick mild steel sheet fixed with mild steel hinges - 02 Nos, locking arrangements with provision of locks and painting the steel surfaces with two coats of synthetic enameled paint over a coat of zinc chromate primer including neccessary earth work, excavation, all as specified and directed by Engineer-in-Charge of size 1.0 x1.0 x1.0 internal dimentions.

M/s Tirupati construction

M/S M.D. CONSTRUCTION .CO

M/S YOGANSH CONSTRUCTION CO.

M/s Himgiri construction

M/s KGN Builders

M.S. ENGINEERS

M/S ISLAM AND BROTHERS

Shree Jee Associates

M/S SANJAY AGARWAL

M/s Subhash Construction Co.

Arkay Instrumentation