Annual repair and maintenance including fendering water supply and electrical work of RCC jetty in marine area at Katchal Island

Amount

Painting two coats of superior quality S.E.paint (Black) on surface of bollard of 90 ton/30 ton & 10 ton cap. Bollard including cost of paint, brush, cost of all labour charges, materials and minor tools etc. complete.

30 Ton cap. Bollard.

10 Ton cap. Bollard.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, allcomplete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Supplying and fixing of mini/giant type fenders, making holes, cutting, bending and fixing of MS plate. GI nipples and flanges, washer, wire rope, wire grip, cardium compound and accessories in position as directed by the Engineer in charge including cost of giant type fenders, MS plate, GI nipples and flanges, washer, wire rope, wire grip, cardium compound and accessories cost of transportation charge of all materials to worksite, scaffolding charges, all lobour charges, cost of minor tools etc complete.

Lifting the giant /mini tyre at the berthing face with the help of crane/forklift for replacing nipple flange, wire rope etc. complete and including cost of all labour charges and cost of minor tools etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

G.I. pipes

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

2 mm thick flat

Extra for providing & fixing wind ties of (40x6)mm flat of Aluminium section.

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing manpower for up keeping, Cleaning and other works related to jetty maintenance including watch and ward of jetties at Katchal as per the direction of Engineer-in-charge, including cost of all labour charges etc. complete.

Unskilled Mazdoor

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

80 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

80 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

50 to 80 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

80 mm nominal bore

Providing and fixing G.I. Flange in G.I. pipe including cutting and threading the pipe, providing necessary nuts, bolts & washers, making long screws etc. complete (New work) :

80 mm nominal bore

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

80 mm diameter pipe

Supplying of Integrated LED Bulk Head Luminaire, 10w comprises of PDC Al housing and milky diffuser similar to C&S SIRIUS Series LED Bulk Head CAT No: LTB10WLED or equivalent.

Supplying and fixing of Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with mounting pole dia - 60 mm od along with 20w LED bulb similar to HAVELLS mushroom (Prismatic) LED Gate lamp and LED Bulb similar to LED Adore 20 W CDL 3 Star B22 lamp or Equivalent and wiring with 1.5 sq.mm PVC copper cable in medium class PVC conduit as required.

Supplying of 2 cored PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt of size 2.5 sqmm with ISI standards Similar to HAVELLS Multicore round or Equivalent.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and fixing of prewired pressure die cast compact Aluminium housing LED street light luminaire 25 watts with driver with IP 65 protection similar to C&S DRACO Series cat No LTESS25WLED or equivalent.

Providing and fixing pole mounting weather proof cable looping loop out box made out of SMC and of size 280 mm x 170 mm x 130 mm out side and 240 mm x 130 mm x 110 mm inside for providing with hinged door and locking arrangements i/c providing and fixing the following mounting and fixing the box in to the cement concreate collar / street light pole with suitable bolt & nuts.

Din channel 6 A SPMCB (Indoasian/Havells etc) 63 A rating modular connector 4 way (similar to connect well make-01 No.)

AG Construction

A Palswamy