Vallam/MLACDS-2/24-25/Pack3

Amount

CONSTRUCTION OF BUS SHELTER AT TINDIVANAM TO GINGEE MAIN ROAD WAY TO MODAIYUR ROAD IN VALLAM PANCHAYAT

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation. as per SS20B

Supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.

Brick work in CM 1:5 mix using ground moulded country bricks of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels,

Rainforcement Cement Concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof s

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Floor finishing with Cement based Anti-Skid tiles of all sizes of 20mm thick of approved colour laid in cement mortar 1:3 using 20 mm thick and pointing with same colour including cost and conveyance of all materials to site and all labour charges etc com

Fabricating, supplying and erection of Special type iron truss raffter made up of 150*4*25*3000 mm at the top with provission of CNC LASSER CUT design.And 168 mm dia *4 mm pipe in horizondal at the top of colum in 8.0 m

k: Providing supplying and installation of SS Bus Shelter with 304Grade Matt finish SS Pipe arrangements for SS Bus shelter. 168mm dia ss pipe to be used 3nos of columns & 40*20*2mm ss tube for chair/bench outer members, 40x40 square tube to be used chairs bottom, advertisement board outer frame and purlin members, 4mm thick ss sheet to be used for side end caps, roof rafters, purlin support, 8mm thick ss sheet to be used flange and cleats wherever required details as per the dwg, complete as per the direction of Engineer-in-Charge.

Supplying and fixing in position of special type colour Galvanised sheet of 0.50mm thick of approved quality and best veraity with necessary ridge sheet and the rate including cost of heay type bolt, nut and washers etc, and erecting the Galvanised sheet in correct allignment and position by using hydraulic crane or by using necessary scafoldings etc, complete.

Fabricating, supplying and erection of iron purline made with 40 x 40 *4 mm M.S tube and necessary holes, clit plates are provided on the M.S.Tube at an appropriate places as directed including cost of bolt, nut and washers etc, including cutting, drilling, grinding, power consumption charges etc, including the iron members are painted with one coat of anticorrosive Zinc cromite primer and two coat of best enamal paint and all other incidental charges, etc, complete.

supplying and fixing sign board by using ACP pannal 1.22*7.4 m with help of ss 40*20 tube frame and back vertical support

Supplying and fixing in position of Name board by using 35 x 35 mm M.S pipe alround the name board and intermedate vertical pipe is same as above. 18gauge M.S sheet fixing on top of M.S pipe and the Aluminium beeding is fixing alround the Name board and Vinyl sticker lettering is fixing on the Name board etc., complete. The rate shall be inclusive of cost of material, loading, unloading, transportation charges etc., complete as directed by the departmental officers.

Providing and fixing SS Hand rails of 304 grade 50.80mm dia 11.60mm thick at required location to a height of 1.0m from finished level welded to 13.50mm dia SS tube post of 1.60mm thick vertical at 1.0m centre to centre three nos of 25mm dia horizontal SS tube of 1.60mm thick in between as per the design shown. The rate shall be inclusive of fixing in position, puffing and polishing etc., complete as directed by the departmental officers.

Labour welfare fund @ 1.00%

Other unforeseen charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

S Keerthika (BID ID -1175649)