Loading…
Loading…
Tender Value
₹11.0 L
EMD Value
₹13,800
Closing Date
18 Jul 2026, 9:30 pm
Rural Development and Panchayat Raj Department
package - a) Graveyard development work in survey no.75 of Kempashettidoddi village under Bairamangala Grama panchayat, Bidadi hobli, Ramanagara taluk, b) Installation work of wooden table for Grama Panchayat Office, Bairamangala, Bidadi hobli, Ramanagara Taluk, c) Installation work of wooden shelves for Grama Panchayat Office, Bairamangala, Bidadi Hobli, Ramanagara Taluk.
RDPR/2026-27/OW/WORK_INDENT27762
RDPR/2026-27/OW/WORK_INDENT27762
Reserved
Other Works
RDPR Division Office Ramanagaar
6 documents required · 6 mandatory
₹500
₹13,800
5 Jul 2026
5 Jul 2026
17 Jul 2026
package -a-Graveyard development work in survey no.75 of Kempashettidoddi village under Bairamangala Grama panchayat, Bidadi hobli, Ramanagara taluk,Installation work of wooden table for Grama Panchayat Office, Bairamangala, Bidadi hobli, Ramanagara Taluk, Installation work of wooden shelves for Grama Panchayat Office, Bairamangala, Bidadi Hobli, Ramanagara Taluk.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT ste...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both si...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufa...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Providing, fabricating and fixing of 6 mm thick High Pressure Laminate sheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied in customized length depending on requirement). Sheets shall...
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Ty...
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/m3 ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for F...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm ---- with all lead and lift and loading and unloading charges cost and conveyanc...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 100 mm with plate 150x32 mm ---- with all lead and lift and loading and unloading charges cost and conveyan...
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length ---- with all lead and lift and loa...
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.75mm ---- with all lead and lift an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW--1-Byramangala-IIA.docx
Tender Document • 0.83 MB
Download all tender documents and submit your bid