Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹28.4 L+₹2.1 L (7.77%)Rejected-AOC PO PS BUD BUD DISTT PURBA BURDWAN PIN 713403 | BUD BUD | PURBA BURDWAN | WEST BENGAL | 713403 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹31.5 L+₹5.1 L (19.3%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹32.8 L+₹6.4 L (24.3%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to firm has changed GST from patnership to pro without any approval of enlistment authority |
Tender Value
₹38.5 L
EMD Value
₹77,100
Closing Date
17 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_619665_1
8500-023/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹77,100
Yes
6 Dec 2023
19 Sept 2023
18 Oct 2023
19 Sept 2023
17 Oct 2023
3 Oct 2023
Amount
Taking down roof trusses, coupled rafters or trussed beams of clear span upto 4m including for renewal of any defective members (timber renewed to be measured separately) and reassembling complete all as specified and directed
Taking down roof trusses, coupled rafters or trussed beams of clear span above 4m and upto 8m including for renewal of any defective members (timber renewed to be measured separately) and reassembling complete all as specified and directed
Housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc. of clear span upto 4m complete all as specified and directed
Housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc. of clear span above 4m and upto 8m complete all as specified and directed
M&L for Second class hard-wood wrought in scantlings of Timber framed and fixed in roof truesses complete all as specified and directed by Engr-In-Charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete conforming to FE 410 W( Gde-E-250) quality A all as specified and directed.
Erection and fixing only of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete conforming to FE 410 W (Gde-E-250) quality A all as specified and directed. Note : Old serviceable steel obtained from dismantling shall be reused after proper cleaning and painting complete all as specified and directed
Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings inch ridges hips valleys complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based corrugated steel sheet 0.50mm thick of anY colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F wind ties for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling or riveting etc and similar work conforming to Fe 410-O or Fe-310-O including painted with one soap coat of zinc cremate primer paint (including preparation of surfaces at contractor's workshop before fabrication) complete all as specified and directed
Dismantling wall and ceiling board of any description complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40mm x 3 mm size 60mm long complete all as specified and directed
S&F Anodised powder coated aluminium snap grid frame work for false ceiling (size of grid 605mmx605 mm) complete all as specified and directed
S&F Non asbestos fiber cement designer building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the premises complete all as specified and directed.
M&L for 25mm thick Cement concrete type B-1,1:2:4 (using 20mm graded stone aggregate) as in floors, finished even and fair complete all as specified and directed
Demolition of Brickwork masonry, laid in Cement mortar and removing rubbish off the premises complete all as specified and directed.
M&L for brick work with fly ash ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed Make: L&T/ACC/Lafarge/Shyam Steel Pvt Ltd
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas, ceiling and brick walls etc incl raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed
M&L for Rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall finished even and smooth with out using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick in CM (1:4) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished fair and even complete all as specified and directed. (Note:-WPC shall be measured and paid separately).
S&F chicken wire mesh for plaster at cracked beam column junctions with brick wall, cutting the grooves in wall, embedding 20 mm die iron nut bolts across the wall, plastering in CM (1:3) and finally to match the surface with adjacent surfaces by applying white wash/OBD or cement base paint as applicable complete all as specified and directed by Engr-in-Charge.
M&L for repairs to crack portion with jacketing technique, taking down the existing plaster up to the brick wall surface of min 200mm wide, cleaning the loose particles on surface of brick work along the length of the crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5mm aggregate up to brick surface and inserting the welded mesh of size 25mmX25mmX2mm along the crack on both sides of the wall surface fixed with, drilling holes 10mm dia on either side of the crack by means of drilling mechanism through the full width of the wall @25cm c/c and insert 8/10mm dia rod in the drilled holes, welded with horizontal rod to with-hold the welded mesh and applying grit plaster 1:1:2 using 4mm and down aggregate finished even and smooth without using extra cement. (Note: reinforcement and welded mesh will be measured and paid separately)
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including plaster, buttresses, columns, pillars, boundary pillars and posts (including cap and bases) including necessary formwork complete all as specified and directed by Engr-in-Charge.
M&L for applying two coat of oil bound distemper on decorated or un- decorated plastered or unplastered surfaces of wall over a coat of alkalic resistant primer and applying plaster of paris putty of 1 mm thick complete all as specified and directed.
M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Supply only Liquid water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed..
M&L for reinforced cement concrete (Nominal Mix) type A-0 (1 :1.5 :3) (using 12.5 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over a span of 1.5m and similar work complete all as specified & directed by Engr-in-Charge.
S&F Mild Steel TMT bars 8mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engr-in-Charge.
Use and waste form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splace between floors and beams, at flat surfaces etc. complete all as specified & directed by Engr-in-Charge.
M&L for 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.
M&L for Non- skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Non-skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge).
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 450mmx350mmx7mm thick set and jointed in neat cement slurry over backing coat of layer of 10 mm thick with CM (1:3) and pointed in white or colour cement to match the colour of tiles complete all as specified and directed. complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Taking up or down 15mm dia bore steel/UPVC tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.
S&F 16 mm outer dia of CPVC pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings in trenches/walls with all plain/brass threaded fittings complete all as specified as specified and directed.
Taking up or down 20 mm dia bore steel/UPVC tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.
S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings in trenches/walls with all plain/brass threaded fittings complete all as specified as specified and directed.
S&F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engr-in-Charge.
S&F Vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.
S&F in repairs 10 Litre capacity PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.
Supply only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern etc complete all as specified and directed
S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of for unions complete all as specified and directed.
S&F in repair PVC connection 15 mm size PTMT nuts of length 600 mm complete all as specified and directed
S&F vitreous china wash basin, white, flat back, size, 550mmX400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.
S&F in repairs Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.
S&F in repair soap dish vitreous china white size 160mmx160mmx90mm approx all as directed by Engr-in-Charge
S&F 25mm dia medium grade Harrison rails, anodised alluminium body, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repair Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.
S&F chromium plated Health faucet (minimum 1.20 mtr length) fixing in pipe etc for EWC complete all as specified and directed.
S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed
S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed
S&F CP tubular towel rail 20mm dia D type 60cm between two flanges complete all as specified and directed by Engr-in-Charge.
Taking down chowkat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame) each complete all as specified and directed
Taking down chowkat or frame with shutters exc 1.50 Sqm and n.exc 4 sqm (without taking of shutter from frame) each complete all as specified and directed
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification, drawing complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-In-Charge .
S&F Factory made single extruded WPC (Wood polymer composite ) solid door/window and others frames/chowkat of size 50x125 mm double shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750kg/cum and fixed in position with MS hold fast/lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engr-in-charge.
S&F Factory made single extruded WPC (Wood polymer composite) solid Plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete as per direction of Engr-in-charge.
S&F in repairs Chromium plated Shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
M&L for preparation of old painted of wood and wooden base materials surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item No 70.00 mentioned here in above but on steel surface struss members complete all as specified and directed
S&F butt hinges 100mm, medium weight, stainless steel all as specified and directed complete all as specified and directed
S&F butt hinges 75mm size medium weight mild steel cold rolled complete all as specified and directed
S&F mild steel ordinary rat tail rod pattern spring 300mm including roller and roller plate on wooden/steel chowkat including welding, riveting etc complete all as specified and directed by Engr-in-Charge.
S&F 150 mm aluminium handle cast type, anodised, complete all as specified and directed
S&F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-charge.
M&L for framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F in repairs, door closer aluminium body, hydraulically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge.
M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed
M&L for cement concrete type C-1,1:3:6 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed
M&L for extra for forming fair finish drain channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed
M&L for 75 mm thick PCC 1:3:6 Type C1 as in plinth protections finishing even and smooth without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
M&L for hardcore of broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 100mm thick PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for Pre-polished machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed
Fixing only Pre-polished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including dismantling of old paver blocks complete all as specified and directed
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed
M&L for preparation of new surfaces of brick, stone, concrete and asbestos cement or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
Providing precast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM (1:4) complete all as specified and directed.
E/M PORTION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators, sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 101.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.
All as per item No 101.00 above but call bell point controlled by one call bell switch 5 Amp switches complete all as specified and directed.
M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole, 5/6 Amps, one way complete complete all as specified and directed
S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts complete all as specified and directed
S&F Bell switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed By Engr-in-Charge.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed
S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed .(For Same Board only)
S&F switch socket combination 2 in 1, 6 pin, (16 Amps) flush type controlled by one switch complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed
S&F submain wiring of two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)
S&F submain wiring of two single core, 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification).)
S&F wall security light fittings 25 watts 230 Volt, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and directed
S&F LED Bulkhead aluminium energy saving made up of aluminium housing with diffuser light fitting 1x10W bulkhead luminaires connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed.
S&F Arrow LED batten PC 1x10 watt 2' A tredy wall celling mounted slim LED batten with polycarbonate housing & poly carbonate diffuser with integrated LED driver with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed
S&F Arrow LED batten PC 1x18 watt 4' A tredy wall celling mounted slim LED batten with polycarbonate housing & poly carbonate diffuser with integrated LED driver with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed
S&F lamp holder, PVC/polycarbonate type with inverter type 12 watt lamp 4 hour back up and back plate straight or angular suitable for batten fittings complete all as specified and directed
Taking down sealing fan cable end, dismantling blades and removing fan and blades to store and M&L painting of celling fans complete ,in situ with synthetic enamel paint by spraying including filling cavities with filler ,one coat after cleaning all dust etc complete all as specified and directed.
S&F exhaust ventilation fan with louvers of sweep 300mm, 230 volts, with blade and frame and louver steel body marked complete all as directed by Engr-in-Charge.
S&F sheet metal enclosure with 20 Amp MCB and two pin and earth plug and socket complete with one single pole MCB all as specified By Engr-in-Charge. Make : ABB/Legrand/Hager/Schneider
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, Double door (when MCBs to be used), tripple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed Make :Havells/ABB/Legrand.
S&F in repairs MCB SPN 32 Amps, 'C' series 10 KA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider
S&F 63 Amp MCCB 4 pole, 3 phase, 415 volt of capacity Amp, 16 KA complete with proper copper thimbles, copper reducer etc all complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
S&F 100 Amp MCCB 4 pole, 3 phase, 415 volt of capacity Amp, 16 KA complete with proper copper thimbles, copper reducer etc complete all as specified and directed Make : ABB/Legrand/Hager/Schneider
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
S&F in repair capacity of 1000 Ltr Rotational / moulded Polyehtylene water tank (Cylindrical vertical with closed top minimum three layer) hoisted &including dismantling , fixed in position complete all as specified and directed Make : Vectus/Sintex/Prayag
S&F in repair of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut complete all as directed by Engr-in-Charge. Make : Vectus/Prayag
S&F in repair 25mm bore GI tubing medium grade in trenches/Floor / pillar connetion in old or new postion including fittings all as specified & as directed including taking down old unserviceable pipe complete all as specified and directed. Make:Bansal/Jindal
All as per item No 133.00 above but 40 mm bore complete all as specified and directed.
S&F in repair 15 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F in repair 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 Ltr BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connecting pipe etc complete all as specified and directed. Make : Bajaj/Havells/CG/Usha
S&F PVC connections 15mm size with PTMT nuts of length 600 mm long all as directe by Engr-in-Charge
S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90Grm/20mm-125Grm) complete all as specified and directed. Make : Vectus/Polytuf/Prayag
M/S BHATTACHARJEE ENTERPRISE
M/S N B SEN CONSTURCTION
SAIBABA ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .