82380 REPAIRS TO COOLING APPLIANCES AT AVADI KALPAKKAM VELLACHI REPAIRS TO PUMPSET AND SERVICING OF EXTERNAL WATER SUPPLY INSTALLATIONS AND REPAIRS TO INTERNAL AND EXTERNAL ELECTRIFICATION AT AVADI AND OTHER OUTER AREA UNDER AGE I NAVY CHENNAI

Amount

Dismantling the unserviceable uncut hermitically sealed compressor, any make, from the existing window AC unit and replacing with factory re-conditioned hermitically sealed compressor for window Air conditioner of 1.5 Ton capacity and reinstalling the entire unit all as specified and directed.

All as per Sl item No 1.00 herein before but 2.0 Ton capacity.

Dismantling the unserviceable uncut rotary compressor from the existing window AC unit and replacing with new rotary compressor, 2.0 Ton capacity and reinstalling the entire unit complete all as specified and directed.

All as per Sl item No 3.00 herein before but Split type AC, 1.5 ton capacity.

All as per Sl item No 3.00 herein before but Split type AC, 2.0 ton capacity. Note for Sl item No. 1 to 5: (i)Unserviceable compressor shall be taken into credit (ii) Gas shall be measured and paid separately (iii)Test reports alongwith warranty shall be provided by the Contractor

Replacement of Unserviceable remote control with new one along with batteries suitable for 1.5/2.00 ton capacity Split type AC of any make complete all as specified and directed.

All as per Sl item No. 6.00 herein before but condensor coil and including servicing the entire unit.

All as per Sl item No 6.00 herein before but for Standard outer cover. Make: As per existing make/model

All as per Sl item No 6.00 herein before but front panel with grill

All as per Sl item No 6.00 herein before but fan blade set.

All as per Sl item No 6.00 herein before but new fan motor 1/5HP

All as per Sl item No 6.00 herein before but thermostat switch.

All as per Sl item No 6.00 herein before but air filter suitbale for AC upto 1.5 Ton capacity

All as per Sl item No 6.00 herein before but wiring kit

Material and labour for Spray painting to the whole unit of window type air conditioner 1.5/2.0 Ton by two coats of synthetic enamel paint after cleaning the unit assembly with castic soda wash complete all as specified and directed.

Dismantling the unserviceable uncut hermitically sealed compressor from the split type AC unit and replacement with factory reconditioned hermitically sealed compressor of any Make including transporting for 1.5 Ton capacity and including servicing the entire unit complete all as specified and directed.

All as per Sl item No 16.00 herein before but of 2.0 Ton capacity. Note for Sl item No. 16 &17: (i)Unserviceable compressor shall be taken into credit (ii) Gas shall be measured and paid separately (iii)Test reports alongwith warranty shall be provided by the Contractor

Replacement of Unserviceable Electronic PCB board suitable for 2.00 ton capacity Split type AC of any make complete all as specified and directed.

All as per Sl item No 18.00 herein before but fan motor 1/6HP capacity and including servicing the entire unit.

All as per Sl item No 18.00 herein before but Condenser coil and including servicing the entire unit.

All as per Sl item No 18.00 herein before but suction valve,

All as per Sl item No 18.00 herein before but discharge valve

All as per Sl item No 18.00 herein before but Indoor unit blower motor of 1.5/2.0 ton capactiy

All as per Sl item No 18.00 herein before but PVC drain pipe flexible type of suitable size

All as per Sl item No 18.00 herein before but fan blade set

Replacement of new indoor unit for existing make and model split type AC 1.5 ton capactiy and including servicing the entire unit of any make complete all as specified and directed.

Material and labour for Spray painting to the whole unit of split type air conditioner 1.5/2.0 Ton by two coats of synthetic enamel paint after cleaning the unit assembly with caustic soda wash complete all as specified and directed.

Removing existing split type Air conditioner of any capacity and refixing in different locations including supply & fixing of factory fabricated mounting brackets (one pair per AC) including making holes for insertion of copper pipe,drain pipe and 3 core cable,and connecting the same to indoor and outdoor units and servicing the entire unit and making good the distrubed surfaces of wall, all as specified and directed.

Dismantling the unserviceable uncut hermitically sealed compressor from the water cooler unit and replacing with factory re-conditioned hermitically sealed compressor for water cooler of any make, 40/ 80 liters capacity and including servicing the entire unit complete all as specified and directed. Note : (i)Unserviceable compressor shall be taken into credit (ii) Gas shall be measured and paid separately (iii)Test reports alongwith warranty shall be provided by the Contractor

Supply and fix Starting relay for 40 to 150 liters water cooler including dismantiling the old unserviceable one and servicing the entire unit complete all as specified and directed.

All as per Sl item No 30.00 herein before but for over load protector and including servicing the entire unit.

All as per Sl item No 30.00 herein before but for thermostat.

All as per Sl item No 30.00 herein before but Fan blade assembly suitable.

All as per Sl item No 30.00 herein before but wiring kit.

All as per Sl item No 30.00 herein before but push cock brass chromium plated of size 15mm.

All as per Sl item No 30.00 herein before but branded new fan motor with base 1/10HP

All as per Sl item No 30.00 herein before but top lid gasket for 80/120 Ltr capacity

All as per Sl item No 30.00 herein before but drain stainless steel tray with drain elbow and connector

All as per Sl item No 30.00 herein before but Gate valve brass screwed both ends of size 15mm bore

All as per Sl item No 30.00 herein before but Float valves brass with PVC ball complete suitable for 15mm bore, ISI marked

All as per Sl item No 30.00 herein before but PVC hose connection pipe with both ends having brass coupling threaded for 15mm GI tubing of standard length

All as per Sl item No 30.00 herein before but PVC drain hose pipe size 32mm dia

Cutting and removing the existing bottom frame of water cooler of capacity 120/150 ltr and refabrication of bottom frame of suitable size with mild steel angle iron 25x25x4mm and welded with 2mm thick MS sheet upto 30cm from bottom height including legs complete all as specified and directed.

Cutting and removing the front bottom cover of water coolers and refixing of new front bottom with 1.6mm thick MS steel sheet complete all as specified and directed.

Material and labour for painting of water cooler with two coats of pastel blue paint to the external surfaces of water cooler and Two coats of anticorrosive black paint over a coat of red oxide primer upto 15 cm height from the base all round including legs for inside of water cooler, of any capacity and including servicing the entire unit all as specified and directed.

Dismantling the unserviceable uncut hermitically sealed compressor from the Refrigerator unit and replacing with factory re-conditioned hermitically sealed compressor for refrigerator any make 200 liters to 310 ltr capacity and including servicing the entire unit all as specified and directed.

All as per Sl item No 46.00 herein before but for 165 to 200 liters refrigerator. Note for sl item No. 46 & 47 : (i)Unserviceable compressor shall be taken into credit (ii) Gas shall be measured and paid separately (iii)Test reports alongwith warranty shall be provided by the Contractor

Supply and fix of relay for 165 to 310 liters Refrigerator including dismantling the old unserviceable one complete all as specified and directed.

All as per Sl item No 48.00 herein before but over load protector 1/6 HP

All as per Sl item No 48.00 herein before but bulb pin/screw type 10/15 W capacity.

All as per Sl item No 48.00 herein before but thermostat defrosting type.

All as per Sl item No 48.00 herein before but door magnetic gasket

All as per Sl item No 48.00 herein before but light switch for refrigerator.

All as per Sl item No 48.00 herein before but cooling coil.

All as per Sl item No 48.00 herein before but condenser coil.

All as per Sl item No 48.00 herein before but freezer door.

All as per Sl item No 48.00 herein before but vegetable tray with glass.

All as per Sl item No 48.00 herein before but PVC ice tray.

All as per Sl item No 48.00 herein before but new frost freezer fan motor.

Renewal of entire portion of base plate and legs ,welding with new MS sheet of proper gauge of refrigerators capacity 165 liters to 310 liters complete all as specified and directed.

Material and labour for two coats of duco paint on exterior face of the refrigerator of any capacity by spray painting including removing the dent etc., complete all as specified and directed.

Dismantling the unserviceable uncut hermitically sealed compressor from the deep freezer unit and replacing with factory re-conditioned hermitically sealed compressor for deep freezer any make up to 425 ltr capacity complete all as specified and directed. Note : (i)Unserviceable compressor shall be taken into credit (ii) Gas shall be measured and paid separately (iii)Test reports alongwith warranty shall be provided by the Contractor

Supply and fix of relay box type deep freezer including dismantling the old unserviceable items complete all as specified and directed.

All as per Sl item No 63.00 herein before but overload protector 1/6HP.

All as per Sl item No 63.00 herein before but door magnetic gasket.

All as per Sl item No 63.00 herein before but condenser coil.

All as per Sl item No 63.00 herein before but brand new fan motor with base 1/10HP

Renewal of entire portion of base plate and legs ,welding with new MS sheet of proper gauge for deep freezer of capacity 500 liters complete all as specified and directed.

Material and labour for two coats of duco paint on exterior face of the deep freezer of any capacity by spray painting including removing the dent etc complete all as specified and directed.

Taking out the voltage stablizer of any make and of capacity 5 KVA from site and transporting to servicing centre to detect /identify the nature of defects/repairs and reassembling after repair/servicing and commissioning at site including testing the same to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.

All as per Sl item No 70.00 herein before but capactity 4 KVA.

Dismantling the burnt out transformer from the 5 KVA capacity stablizer of any make and rewinding the same with super enameled copper wire including provision of all materials and refixing into the stablizer and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.

All as per Sl item No 72.00 herein before but capactity 4 KVA.

Supply and fixing relay set of two for voltage stabilizer up to 5 KVA capacity complete all as specified and directed.

All as per Sl item No 74.00 here-in- before but PCB (printed circuit board).

All as per Sl item No 74.00 here-in -before but 3 core flexible card 2.5 Sqmm.

All as per Sl item No 74.00 here-in- before but indicating lamp.

All as per Sl item No 74.00 here-in- before but on/ off switch.

Sub main wiring with four runs of single core 6 sqmm multi stranded copper conductor PVC insulated unsheathed cable, FRLS, 1100 volts grade and one run of 6 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling complete all as specified and as directed. Note: Four runs of wire, one run of conduit and one run of earth conductor shall be measured as one unit length.

Supply and fix in repairs copper pipe 1/2" dia for all cooling appliances of any capacity including dismantling the unserviceable pipe complete all as specified and directed.

All as per Sl item No 80.00 herein before but size 3/8" dia

All as per Sl item No 80.00 herein before but size 5/16" dia

All as per Sl item No 80.00 herein before but size 1/4" dia

Supply & Fixing three core flexible cord copper wire of size 4 Sqmm, complete all as specified and directed.

Supply and fix two pin sheet metal earth plug top and metal clad socket 20 Amps capacity complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with single pole MCB 20 Amps for incoming and out going control complete all as specified and directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB SP 20/25 Amps 240 Volts 10 KA breaking capacity complete all as specified and directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Material and labour for replacement of unserviceable UPVC conduit pipe 20mm dia to drain out pipe including all accessories and taking down the existing one, with fixing arrangment on wall, ceiling etc.,complete all as specified and directed.

Supply only Refrigerant Gas R-22 all as specifed and directed.

Supply & Fix 3 pin 15 Amps plug top, 250 Volts complete all as specified an directed.

Supply only Refrigerant Gas R-410A all as specified and directed.

Supply and laying in trenches steel water tubing,medium grade, galvanized including all fittings and taking up or down existing tubing with all connections for taking into credit, complete all as specified and as directed. Make: Tata/ Jindal/Zenith/Swastik/Prakash

25mm dia

40mm dia

50mm dia

Supply and fixing steel water tubing,medium grade, galvanized including all fittings, on walls, ceilings or laid in floors, and taking up or down existing tubing with all connections for taking into credit, complete all as specified and as directed. Make: Tata/ Jindal/Zenith/Swastik/Prakash

25mm dia

40mm dia

50mm dia

Supply and fix, gun metal gate valve, with iron wheel head confirming to IS 778 class I, screwed both end for iron pipe and removing unserviceable gate valve, complete all as specified and directed. Make: Leader/Bir/Zoloto/Kirloskar

25mm dia

40mm dia

50mm dia

Taking out the old unservicable sluice valve and supply and fix CI sluice valve 100 mm dia conforming to IS 780 with flanged and drilled ends and of any pattern including necessary jointing and jointing materials complete (with rubber gasket, bolts and nuts etc., ) all as specified an as directed. Make :Kirloskar / Upadhaya /Leader/L&T/Bir

Removing unserviceable foot valve/ check valve of following dia from the suction pipe of the pump set, supply and fix New check valve, heavy duty of gun metal, both ends threaded and end leaf spring loaded vertical type, complete all as specified and directed. Make :Kirloskar / Upadhaya /Leader/Sant/AUDCO

40mm dia

50mm dia

Flushing the bore well of size 150mm dia, 60 metre deep by means of Air compressor of capacity not less than 650 CFM at 150 PSI pressure for not less than four hours till the clear vwater comes out.

Repairs to 5 HP capacity electric driven centrifugal pumpset, replacement of spares in the existing position complete all as specified and directed. Make: Kirloskar/ Ventura/ Suguna/ Tulu (Note: Rewinding and supply of Spares will be paid under seperate items here in after at Sl No. 98.01 to 98.04)

Rewinding of motor starter coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge.

Ball bearing (drive and non dirve end)

Electrodynamically balanced bronze impeller.

Gunmetal bush.

Repairs to 5 HP capacity submersible pumpset,3 Phase, 440 volts including replacement of spares complete all as specified and directed. Make: Kirloskar/ Ventura/ Suguna/ Tulu (Note: Rewinding and supply of Spares will be paid under seperate items here in after at Sl No. 99.01 to 99.07)

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge.

Stainless steel shaft

Ball bearing

Stainless steel bush

Water seal

Submersible cable 3 core, copper stranded 2.5 sqmm flat type

Lifting of pumpset from bore well 76 metres deep and lowering into borewell after repair

Supply and replacement of DOL Starter 3 phase, 440 Volts with relay range up to 10 Amps, including taking down old unservicable one, complete all as specified and directed. Make : ABB/L&T/Siemens/Crompton Greaves/GE

Supply and replacement of star delta starter, open execution type with single phase protection and relay range from 13 – 32 Amps, 3 Phase, 440 Volts including taking down old unservicable one, complete all as specified and directed. Make :ABB/L&T/Siemens/Crompton Greaves/GE

Supply and fix Ammeter size 96 mm square type, range 0 to 60 Amps and dismantling the existing unserviceable ammeter from the panel board complete all as specified and directed. Make:IMP/Automatic Electric/L & T/MECO

Supply and fix voltmeter size 96 mm square type range 0 to 500 volts and dismantling the existing unserviceable voltmeter from the panel board complete all as specified and directed. Make: IMP/Automatic Electric/L & T/MECO

Supply and fix CI fitting for spigot & socketed pipe up to 150 mm bore having bends 9 any type, radius and angle, tapers any type, Staright, bend, increasing, decreasing or double socket etc , Tee pieces, single branch , "y" Junction, double branch, cross all sockets or socket and spigot collars, caps and plugs, complete all as specified and as directed. Make :Electro steel/ Kejriwal/NECO/Kesoram

Material and labour for running lead joint for 100 mm dia CI pipe including spun yarn and other accesories, complete all as specified and as directed.

Material and labour for cast iron pipes 100mm bore, with spigot ends centrifugally cast, Class LA, in any length, laid in trenches, including taking out old unserviceable pipe, complete all as specified and as directed. Make :Electro steel/ Kejriwal/NECO/Kesoram

Material and labour for preparation of old painted surfaces of LT panels and spray painting with two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces of pipe lines and accessories like pump and motor along with panels of pump house and spray painting with two coats of synthetic enamel paint complete all as specified and directed.

Cleaning and removing of sludge/mud from the sump, 6 mtr dia and 6 mtr depth including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge.

Cleaning and removing of sludge/mud from overhead reservoir 25 feet staging, 3000 GLNS including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm obtained from excavation complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials for taking into credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down old sub main wiring with 2 runs/ 4 runs or 4/6/10 sqmm aluminium / copper cables,removing materials for taking into credit including making good to disturbed surface all as specified and directed.

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade confoRunning Metreing to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

One light point controled by one switch

One fan point controlled by one regulator/ switch

One 3 pin socket outlet 6 amps socket on independent board

One 3 pin socket outlet 6 amps socket on same board

One bell/buzzer point controlled by one push button on same board

One light point controlled by two number of two way switches

All as per item No.116 here-in-before but with 4 sqmm cable for one 3 pin socket outlet 16 Amps on independent board with 4 sqmm cable as earthing conductor

Supply and fix in repairs switch Modular 6 Amps 240 Volts one way switch, flush type, 1 module, including taking down existing, complete all as specified and directed.

Supply and fix in repairs switch Modular 16 Amps 240 Volts one way switch, flush type, 1 module, including taking down existing, complete all as specified and directed.

Supply and fix switch socket Modular 6 Amps, 2/3 pin combined, 2 module all as specified and directed.

Supply and fix switch socket Modular 6 Amps/16 Amps, 2/3 pin combined, 2 module all as specified and directed.

Supply and fix ceiling rose, 3 way PVC polycarbonate, 65 x 35 mm, isolated body, complete all as specified and directed.

Supply and fix Call bell (Ding - dong) electric suitable for working on 230 volts AC supply multi music type complete all as specified and as directed.

Supply and fix Fan Regulator electronic rotary, 0-4 steps step type 120 Watt, 240 Volt 50 Hz humming free, 2 module complete all as specified and directed.

Supply and fix switch Modular 6 Amps 240 Volts two way switch, flush type, 1 module, including taking down existing, complete all as specified and directed.

Supply and fix switch Modular 6 Amps 240 Volts one way switch, flush type, 1 module, including taking down existing, complete all as specified and directed.

Supply and fix in repair switch, piano flush type single pole one way 5 amps 240 volts complete , including taking down existing, complete all as specified and directed.

Supply and fix in repair switch socket combination, piano flush type,3 pin 5 amps 240 volts complete , including taking down existing, complete all as specified and directed.

Supply and fix in repair switch socket combination, piano flush type,5 pin 5 A/16A 240 volts complete , including taking down existing, complete all as specified and directed.

Supply and fix in repair switch socket Modular 6A-2/3 pin combined, 2 module all as specified and directed.

Supply and fix in repair switch socket Modular 6/16 Amps, 2/3 pin combined, 2 module all as specified and directed.

Supply and fix in repair ceiling rose, 3 way PVC polycarbonate, 65 x 35 mm, isolated body, complete all as specified and directed.

Supply and fix in repair Call bell (Ding - dong) electric suitable for working on 230 volts AC supply multi music type complete all as specified and as directed.

Supply and fix in repair Fan Regulator electronic rotary, 0-4 steps step type 120 Watt, 240 Volt 50 Hz humming free, 2 module complete all as specified and directed.

Supply and fix Modular white cover plate with frame 1 module and metal flush box 1/2 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 3 module and metal flush box 3 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame 1 module complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame 2 module complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame 4 module complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame 6module complete all as specified and as directed.

Supply and fix lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for batten fitting complete all as specified and directed.

Supply only LED bulb 7 watts,retrofit, complete all as specified and directed.

Supply only LED bulb 9 watts, retrofit,complete all as specified and directed.

Supply and fix LED Tube light fitting 1 x 18 W (4 feet) , 1800 lumen, trendy wall mounted batten with extruded aluminium housing and integrated LED driver etc… complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Crompton Cat Part No. LCTL-18-CDL or equivalent in Philips/ Bajaj/ Wipro/GE/HPL

Supply and fix LED light fitting 1 x 9/10 W (2 feet) ,230 V,1000 lumen, trendy wall mounted batten with extruded aluminium housing and integrated LED driver etc… complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Crompton Cat Part No. LCTL-9-CDL or equivalent in Philips/ Bajaj/ Wipro/GE/HPL

Supply and fix LED light fitting 36 W (2x2 feet) ,230 V, 6000 lumen ,trendy surface mounted batten with extruded aluminium housing and integrated LED driver etc… complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Crompton Cat Part No. LCTLRN-36-CDL or equivalent in Philips/ Bajaj/ Wipro/GE/HPL

Sub main wiring with two run single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 25mm conduit / casing capping will be measured as one unit length.

All as per item No.151 here-in-before but for 2runs of 6 sqmm cable and 01 run of 6 sqmm cable as earth continuity conductor

All as per item No.151 here-in-before but for 2runs of 10 sqmm cable and 01 run of 10 sqmm cable as earth continuity conductor

Supply and fix in repair sheet metal enclosure powder coated, for DB's, MCB TPN 8 ways, double door, 415 volts with 200 Amps standard bus bar of suitable size and common neutral link, drilling holes for incoming and out going cables, including disconnecting electric connections and dismantling old unserviceable DB from position, complete all as specified and directed. MAKE: L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix in repair sheet metal enclosure powder coated, for DB's, MCB TPN 4 ways, double door, 415 volts with 200 Amps standard bus bar of suitable size and common neutral link, drilling holes for incoming and out going cables, including disconnecting electric connections and dismantling old unserviceable DB from position, complete all as specified and directed. MAKE: L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix in repair sheet metal enclosure powder coated, for DB's, MCB SPN 4 ways, double door, 415 volts with 200 Amps standard bus bar of suitable size and common neutral link, drilling holes for incoming and out going cables, including disconnecting electric connections and dismantling old unserviceable DB from position, complete all as specified and directed. MAKE: L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix in repair sheet metal enclosure powder coated, for DB's, MCB SPN 8 ways, double door, 415 volts with 200 Amps standard bus bar of suitable size and common neutral link, drilling holes for incoming and out going cables, including disconnecting electric connections and dismantling old unserviceable DB from position, complete all as specified and directed. MAKE: Indoasian/Havells/Standard

Supply and fix in repair MCCB 63 Amps, 4 pole, 415 volts, adjustable type with breaking capacity 16KA including taking down existing all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix in repair MCCB 100 Amps, 4 pole, 415 volts, adjustable type with breaking capacity 16KA including taking down existing all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB TPN, 230 Volts, 32 to 63 amps , complete all as specified and directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Material and labour for earthing complete with copper earth plate of size 600 mm x 600 mm x 3.15mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below noRunning Metreal ground level, connected to 20mm x 3mm copper strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal dust, salt, PCC M-15 type B1 in pit with precast RCC M-15 type B1 in cover reinforced with XPM not less than 4Kg per Sqm, test point etc, all as shown in electrical plate No 3 of SSR Part - I (2009) Specifications complete with necessary earth work in any type of soil, removal to a distance n.exc 50 m, including testing on completion, complete all as specified and as directed by Engineer-in-Charge. Note : The cost of excavation, earth work, PCC pit, CI cover, funnel, watering pipe, wire mesh, charcoal dust, common salt, 20mm bore medium grade, 40mm bore light grade GI pipe as protection to earth lead strip shall be deemed to be included in the quoted rate.

Material and labour for earth continuity conductor or copper strip 20 x 3 mm buried in ground/ fixed on wall/ drawn in 15 mm dia light grade GI pipe, complete all as specified and directed.

Cutting channels, grooves or rebates not exc 15cm, including trimming the surface and making good to match the existing surface after replacement of conduits complete all as specified and directed.

Supply and fix , 20 mm external dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Material and labour for telephone sockets , special type (for telephone and data cable) complete all as specified and as directed.

Taking down after disconnection of electrical connections etc., of the existing ceiling fan 1200 mm sweep, of any make and checking for fault and hanging back after carrying out all repair works including connecting up complete all as specified and as directed. (Note : Rewinding and spares required for repairs shall be measured and paid separately under items here in after)

Rewinding of ceiling fan 1200mm sweep, stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil complete all as specified and directed.

Supply only ball bearing of ceiling fan, 1200mm sweep.

Supply only capacitor of 2.5 mfd for ceiling fan, 1200mm sweep.

Supply only condensor holder for cieling fan

Supply only new shaft to match the existing in ceiling fan

Supply new rubber shackle with bolt nut split pin for ceiling fan

Scrubing / removing the existing paints from the ceiling fan 1200 mm sweep and painting the fan with two coats of synthetic enamelled paint over a coat of metal oxide primer complete all as specified and directed.

Taking down after disconnection of electrical connections etc., of the existing exhaust fan 300 mm / 450 mm sweep of any make and checking for fault and fixing back in position after carrying out all repair works including connecting up complete all as specified and as directed. (Note : Rewinding and spares required for repairs shall be measured and paid separately under items here in after)

Rewinding of exhaust fan , 300 mm sweep stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil.

Rewinding of exhaust fan 450mm sweep stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil.

Supply only ball bearing suitable for exhaust fan any sweep

Supply only capacitor of 4 mfd for exhaust fan.

Scrubing / removing the existing paints from the exhaust fan 300/ 450mm sweep and painting the fan with two coats of synthetic enamelled paint over a coat of metal oxide primer.

Supply only new fan louvers 300 mm dia sweep exhaust fan

Supply only new fan louvers 380 to 450mm sweep exhaust fan

Supply only new fan blades set for 300 mm sweep exhaust fan

Supply only new fan Blades for exhaust fan of 380 to 450mm sweep exhaust fan

Taking down after disconnection of electrical / water connections etc of the existing water heater of any capacity and of any make and opening the bottom cover replacing replacing the defective parts , fixing the cover and refixing in original position after carry out all repair works including connecting up complete all as specified and as directed. (Note : Spares required for repairs shall be measured and paid separately under items here in after)

Supply only new water heating element of capacity 1.50 KW with rubber gasket (Make : Racold / Bajaj/Usha/Venus)

Supply only new water heating element of capacity 2.0 KW with rubber gasket (Make : Racold / Bajaj/Usha/Venus)

Supply only new thermostat suitable for storage type water heaters/geysers

Supply only Pressure release valve 15mm dia suitable for geyser.

Supply only Air release valve 15mm dia, suitable for geyser.

Supply only Aparatas Gyser Assebly suitable for 25/35/50 ltrs capacity Geysers

Supply only new cut out suitable for storage type water heater.

Supply and fix 3 core 4 sqmm copper conductor cable suitable for geysers of any size complete all as specified and as directed.

Supply and fix in repair single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 25 Amps including taking down old unserviceable old single pole and neutral with two pin and earth plug and socket complete all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix in repair 3 pin plug top and metal socket of capacity 25 Amps complete all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Preparing external surface of water heater, cleaning and painting with one coat of synthetic enamel paint of white colour of approved make with brush and writing MES No. Etc., as directed, complete all as specified and as directed.

Supply and fix 3 mm thick hylum sheet top cover on switch board including cutting to required sizes, fixing with brass screw etc., complete all as specified and as directed.

Hanging only ceiling fan any sweep, including dismantling existing down rod, provision of new down rod of GI Pipe 15mm bore of pipe medium grade of length 600mm, painted with synthetic enamel paint and connecting up with and including provision of cable from ceiling rose or connector to fan complete all specified and as directed

Supply and lay burnt bricks of old size 230mm x115mm x 75mm, sub class 'B' Designation 75 as in cable protection all as specified and as directed.

Supply and spread fine river sand in trenches, as in cable cushioning all as directed. Note :- Punned thickness will be considered for payment.

Supply and fix galvanised iron pipe, light grade of size 40mm dia for cable protection , laid in trenches or fixed to walls/poles including taking out old unserviceable damaged GI pipes, complete all as specified and as directed. Make: Tata/ Jindal/Zenith/Swastik/Prakash

Supply and laying LT UG cable XLPE insulated armoured heavy duty 1100 volts grade with multi stranded aluminium conductor of following sizes, fixed in walls/poles or in trenches, including testing and commissioning of cables and taking out old unserviceable cable all as specified and as directed by Engineer-in-Charge.

2 core 10 sqmm

4 core 10 sqmm

4 core 16 sqmm

3.5 core 25 sqmm

3.5 core 35 sqmm

3.5 core 50 sqmm

3.5 core 95 sqmm

3.5 core 120 sqmm

Supply and fix cable jointing kit for 1.1KV grade cable for straight through joint complete with jointing material (Epoxy) armoured aluminium conductor cable of following sizes all as specified and as directed by Engineer-in-Charge.

2 core 16 to 35 sqmm or 3 core 16 to 25 sqmm or 4 core 10 to 16 sqmm

3.5 core 120 sqmm

3.5/4 core 25 to 35 sqmm

3.5 core 50 sqmm

3.5 core 70 sqmm

3.5 core 95 sqmm

Removing existing old street light and supply and fixing 45 watts LED 6000 lumen, security light fitting New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source, with toughened glass cover alongwith electronic driver.. inluding necessary wiring and fixing clamp,nuts bolts etc complete all as specified and directed. Make: Crompton Cat Part No. LSTP-45-CDLor equivalent in Philips/ Bajaj/ Wipro/GE/HPL

Supply and fix pole mounting junction box (looping box) for street light for 3 phase 4 wire system with internal size 240 x 130 x 110mm comprising of PVC connector and one porcelain fuse cutout 16Amps including mounting arrangements etc and removing existing defective looping in box, complete all as specified and as directed. Make: Sintex / Hansel / Spelsbary

Supply and fix bracket made out of 40mm dia galvanised iron pipe1.20m long, bent to shape an angle of 1350 and reduce at the end to 32 mm dia match with the street light including suitable 02 set of clamps with nut, bolt and washers including taking down old corroded GI pipe bracket with accessories all as specified and as directed.

Supply and fix galvanised iron pipe, light grade of size 15mm dia for cable protection including clamps within 1.5 metre distance, laid in trenches or fixed to walls/poles including taking out old unserviceable damaged GI pipes, complete all as specified and as directed. Make: Tata/ Jindal/Zenith/Swastik/Prakash

Cutting the existing road/hard standing for laying of pipes (40 cm width and 50 cm depth) and making good the disturbed surface by using PCC (1:4:8), type D-2 using 40mm aggregates at the top for a depth of 15 cm and remaining portion to be covered with excavated soil , complete all as specified and directed. Note:Rates for excavation and soil filling shall be considered seperately under relevant items

Supply and fix MCCB 63 Amps, 4 pole, 415 volts, adjustable type with breaking capacity 25KA,,thermal magnetic release, complete all as specified and as directed. Make: L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCCB 100 Amps, 4 pole, 415 volts, adjustable type with breaking capacity 25KA,thermal magnetic release, complete all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCCB 250 Amps, 4 pole, 415 volts, adjustable type with breaking capacity 50KA,thermal magnetic release, complete all as specified and as directed. Make:L & T/ Legrand/ ABB/ Siemens/ Schneider

EVEREST ENGINEERING WORKS