Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.2 LAccepted-AOC | L1 | Accepted-AOC QUOTED REASONABLE RATE | |
| 2 | L2₹99.3 L+₹3.3 L (3.43%)Rejected-Finance 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L2 | Rejected-Finance quoted high rate | |
| 3 | L3₹99.6 L+₹3.6 L (3.76%)Rejected-Finance | L3 | Rejected-Finance quoted high rate |
Tender Value
₹88.2 L
EMD Value
₹1.6 L
Closing Date
5 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AF Jaisalmer
AIR FORCE STATION JAISALMER 345001
PROVISION OF WORK SERVICES FOR COMMISSIONING OF SDR PROJECT AND ADDITIONS AND ALTERATIONS INCLUDING IMPROVEMENTS TO BUILDING NO P4 P5 AND P7 AT GURUSHIKHAR AT AIR FORCE STATION MOUNT ABU RAJASTHAN
2023_MES_587265_2
85958/E8
Open Tender
Civil Works
Works
270 days
AGE (I) (AF) Mount ABU
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
AGE (I) AF MOUNT ABU
₹1.6 L
Yes
24 Aug 2023
30 Jun 2023
7 Aug 2023
30 Jun 2023
5 Aug 2023
24 Jul 2023
4 Jul 2023 - 11 Jul 2023
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.
Taking down down cement plaster on brick or stone wall etc incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
Dismantling boarding of any description fixed in ant position with screws complete all as specified and directed.
Taking down old APP membrane with plaster of existing water proofing treatment on roof surfaces etc. including removing debris out site of MD land complete all as specified and directed.
Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as specified and directed.
Taking down shutters of any description area exceeding 1.0Sqm but not exceesding 2.0Sqm each complete all as specified and directed.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Cutting Existing steel tubing in position without taking down, 20mm bore of pipe for alterations or additions (each cut measured ) Complete all as specified and directed.
Cleaning of roof slab/chajja with sweeping with brooms, removing all depositions /mud/vegetations etc complete all as specified and directed.
Excavating in trenches for hard dense, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.
Excavating in post holes or similar in soft/disintegrated rock each n exc 0.50 Cum getting out,returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
Removing of excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.
Returning filling in including spreading levelling watering &well ramming in layers n.exc 25cm in hard/dence soil complete all as specified and directed.
Earth filling under floors in layers n exc 25cm thick spreading & levelling including well ramming complete all as specified and directed.
M&L for hard core broken stone or builders of gauge not exceeding 63mm, deposited, spread and leveled in layer not exceeding 20 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for brick work built in cement mortar (1:6) with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, complete all as specified and directed.
M&L for brick work built in cement mortar (1:4) with sub class 'B' old size bricks straight or curved on plan to any radius as in half brick thick wall complete all as specified and directed.
Material & labour for preparing new surfaces of roof and applying two coats of Polyurethene (PU) acrylic based Water proofing liquid compound over and including a coat of diluted elastomeric self primer with reinforcing fabric sheet as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed. Note :- Quoted rate shall be deemed to be included for work in buildings/ structure of any height.
M&L for machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 complete all as directed.
M&L for machine cut Kota stone slab 18 to 20 mm thick in skirting laid over cement plaster 15 mm CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40mm grade stone aggregate as in Sub floors,Sub bases ,flooring etc complete all as specified and directed.
M&L for 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course/padding, finished even and fair on roof/ chajjas etc complete all as specified and directed.
M&L Chequered PVC Moulded cement concrete tiles dark shade 30cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry in floors with gray cement and pigment with screed bed 15 mm CM 1:6 complete all as specified and directed.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for 60mm thick PVC moluded factory made reflective type heavy duty smooth finish cement concrete inter locking paver block of M-30 grade made by block making machine with strong vibrating compaction casted in rubber/Pu mould on a vibrating table of approved size and design/shape laid in reqd colour and pattern over and including 100 mm thick PCC in 1:2:4 and 50mm thick compacted bed of coarse sand filling the joints wiyh coarse sand etc including vibrating the surface with vibrating machine complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed cement mortar in CM 1:4 complete all as specified complete all as specified and directed.
M&L for coloured printed Ceramic tiles area of each tile exceeding exc 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15 mm thick screed bed cement mortar in CM 1:4 complete all as specified and directed.
M&L for digital design glazed ceramic tiles in vertical surface of size of each tile 350 x 250x 7mm/450x300x7mm thick fixed to wall with 10 mm thik cement sand mortar in CM 1: 4 , set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed.
M&L for 10mm thick vetrified Light shade ceramic tiles (square/rectangular) polished, area of each tile not exc 0.36 sqm in floors etc set and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50micron ) aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F powder coated ( minimum thickness of powder coating 50micron ) aluminium windows and ventilators , fixed type without sash bars ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading ,screws etc complete all as specified and directed.
S&F Aluminium doors shutters air tight with natural anodized alunimium frame with on or more rebate partly glazed and partly panelled of with hollow profile PVC panelling of thickness 12mm (all aluminium member Top, bootom, vertical & middle of shutter made of size 82.55x44.45x1.80mm thick including necessary jointing cleats, glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading /glazing clip size 19.00x17.30x0.70mm, wt 0.097 Kg/RM of both side and fixing aluminium fittings i.e aluminium hinges 100mm three numbers, handles 200mm long two numbers, tower bolts 150mm two numbers and mortic lock with 06 lever fitting shoiuld be ISI marked complete in all respect as engr-in-Charge. (Rates will also include making good floor /wall jambs of doors/ windows surface with plaster and match with existing finishes)
M&L for Paint Coated Aluminium sliding window any Size in three track of size 65 x 27 x 1.8 mm thick Jindal window section (Deluxe Series) S 5066 or equivalent fixed on a frame of size 80 x 45 x 1.5 mm Jindal window section (Deluxe Series) 21376 or equivalent and Deluxe Clips Size 30 x 38 x 1.2 mm with Stainless steel wire mesh of 0.36 mm dia with aperture of 1.40mm fixed with aluminium F chanal including provision of 5.5 mm thick toughened glass fixed with Paint Coated Aluminium snap and rubber beading all complete as directed by Engr-in-Charge. Note. (a) Aluminium window domal lock Size 200mm used in 27 mm Series to be locking each Shutter. (b) Two sliding shutters of glass and one sliding shutter of SS wire mesh (c) Wire mesh and toughened glass shall be measured and paid separately.
S&F Solid PVC Double door frame of size Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm wooden colour PVC sheet on back face, supplying & fixing in frame at site as per specified and directed.
S&F 30 mm thick factory made flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thick ness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified
S&F 35 mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification and drawing complete all as specified and directed.
S&F Hollow metal fire rated doorsapproved make 120mins tested and certified design as per IS 3614 part-2 & BS 476 part-20 & 22 at NABL Approved Laboratory for its stability and integrity . Galvanized steel sheet to be used should be confirming to IS 277 . Recommended fire door design should be similar to earlier test evidence from NABL Approved Laboratory with or without vision lite for maximum fire rating of 2hrs . Doors should be finished in Powder Coating with film thickness of 60 microns approx. in desired RAL Shades. The manufacturer company shall be a member of NFPA and ISO 9001-2015 certified -ACODOR Make .Door Specification Door Size : 1200 X 2100 mm Door Shutter Thickness : 46 mm Infill : Honeycomb Core Frame : 100 X 57 mm / Single Rebated Finish : Powder Coated Door Hardware included Hinges : 4 X 3 X 3 - 2bb Butt Hinges - GEZE Door Closer : fire rated GEZE make Vision Panel : 200x 300mm - 2 hrs fire rated - karlite Panic Bar : Push Type GEZE Make External Trim : with key GEZE Make complete all as specified and directed.
S&F aluminium fancy type deco grill powder coated 4-5mm thick fixed to firmly aluminium sections, approved by Engineer - in charge .Note:- Necessry cleats/ any type channels etc can be paid and measured separately complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F 5.5mm thick Sheet glass, ordanary quality and glazing with oil putty in square n exc 0.5 sqm in each pane bracket guard and railing complete all as specified and as directed.
S&F 5.5mm thick toughtened glass, ordanary quality and glazing with oil putty in square n exc 0.5 sqm in each pane bracket guard and railing complete all as specified and as directed.
S&F 3 mm thick Figured glass,pin head type and glazing with oil putty, in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.
S&F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.
S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed.
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-1 all as specified and directed.
S&F 100 mm long butt hinges, stainless steel with galvanised mild steel hinge pin, anodised and fixed, type C-1 all as specified and directed.
S&F Continuous (piano) hinges 30 mm wide flap, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 100mm long aluminium handles cast type, anodised complete all as specified and directed.
S&F 125mm long aluminium handles cast type, anodised complete all as specified and directed.
S&F 150mm long aluminium handles cast type, anodised complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 30mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S&F 2nd class hard wood scantling clean sawn timber fixed for purlins, posts rafters etc, in any position (unframed work) complete all as specified and directed
S&F beads exc 3mm but n exc 75mm girth of soft wood
S&F ball catches with 8mm dia steel ball and brass body and striking plate incl letting in and fixed
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking, bending spirally or hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required including crancking, bending spirally or hooping for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F mild steel framed work as in door chowkats , shutters of angles or other section with gusset plates, rails, braces etc complete drilling welding for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges for steel door fittings (exclusive of steel sheeting or other covering running rails or guides) and hanging also fastening and fixing complete ((Fe-290-Gde-165) complete all as specified and directed.
S&F Framed brackets of angles or tees and MS Flats, Base plates with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles and fixed to roof with fastners, as necessary, gusset plates, rivetting, hinges including with locking arrangements etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified and directed.
S&F joist channel angle, tee sections, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-410-W Gde E-250 quality-A all as directed by Engr-in-charge
S&F Welded steel wire fabric n exc 4 kg/sqm fixed to steel members complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and roof beam; and similar work; verticle or to batter complete all as specified and directed.
S&F Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) kitchen platform complete all as specified and as directed.
S&F Formwork to edges of concrete flats, treads ,opening in concrete wall and side of RCC /PCC bands etc complete all as specified and directed.
M&L for 35mm thick (measured solid) precast cement concrete (1:2:4) type B-0 using12.5mm graded aggregate as in louveres and jallies and set in cement mortar (1:4) including all mouldings complete all as specified and directed.
M&L for RCC Nominal Mix (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for RCC Nominal Mix (1:2:4) type B-1 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and as directed.
M&L for RCC Nominal Mix (1:2:4) type B-1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC Nominal Mix (1:2:4) type B-1 using 20 mm graded stone aggregate as in Slabs supported on walls,beams and columns ,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and as directed.
M&L for 15 mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply only.
M&L for 10 mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering cement plaster in cement mortar (1:3) with water proofing compound @ 3% by weight of cement, on concrete surfaces complete all as specified and directed. Note:- Water proofing compound shall be paid seperately as supply only.
M&L for 5mm thick cement plaster in cement mortar (1:3) on ceiling finished even & smooth without using extra cement on concrete surface complete all as specified and directed.
M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.
Supply only Integral water proofing compound complete all as specified and directed.
M&L for preparing new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.
M&L for preparing new wood & wood based surfaces and applying two coats of synthetic enamel paint over and including a coat of pink primer, exc 10 cm width or girth complete as specified.
M&L for preparation of old painted surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparing of new surfaces of any description and applying two coats of oil bound distempering walls over and including a coat of alkali resistant and thin layer of wall care putty on plastered surfaces, complete all as specified and as directed.
M&L for preparing of new surfaces of any description and applying two coats of plastic emulsion exterior paint in over and including a coat of primer complete all as specified and directerd.
M&L for preparing of new surfaces of any description and applying two coats of exterior emulsion weather proof paint in camouflage pattern over and including a coat of primer complete all as specified and directed. Note - work shall be got executed through skilled representative of manufacture company and any height wihtout any extra charge
M&L for preparation of newly plastered surface and applying three coat of white washing all as specified and as directed.
M&L for preparing new plastered surfaces of ceiling of any description and applying two coats of white washing on ceiling complete all as specified and directed.
M&L for preparing old decorative surfaces of any description and applying two coats of white washing on ceiling complete all as specified and directed.
M&L for preparing of old surfaces of walls, on old decorative cement painted walls , pillasters, cornices, by washing rubbing down and stopping and distempering with two coats of oil bound distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and as directed.
M&L for preparing of old surfaces of walls, on old decorative cement painted walls , pillasters, cornices, by washing rubbing down and stopping and distempering with two coats of cement base paint over a coat of alkali resustant primer complete all as specified and as directed.
M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc. complete all as specified and directed.
M&L for removal of existing treatment from walls or similar surfaces by washing, rubbing down and stopping of distempered and painted surfaces etc and applying two coats of exterior emulsion weather proof paint in camouflage pattern over a coat of primer complete all as specified and directed. (Note - Work shall be got executed through authorised skilled representative of manufacturer/ company and any height wihtout any extra charge)
S&F in repair 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed.
S&F in repair Brass CP mixer 15 mm for mixing hot & cold water screwed down ofr iron pipe and fixed complete all as specified and directed.
S&F in repair health faucet with double lock 1 meter brass plated stainless stell flexible hose and wall hook complete all as specified and directed.
S&F in repair CP telephonic jet with all fitting and fixture for EWCs of complete all as specified and directed.
S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), white colour triple layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking down existing water storage tank complete all as specified and directed.
S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), white colour triple layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking down existing water storage tank complete all as specified and directed.
S&F in repair Vitreous China urinals, full stall type white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F in repair vitreous China wash down water closet (EWC) pedestal pattern coloured incl P or ‘S’ trap coloured , plastic water closet seat cover including aluminium hanging device & cement concrete bedding complete all as specified and directed.
S&F in repair Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair venetion blinds 1st quality with 100 mm wide flaps of approved shade vertical type having tiling and sliding arrangement by means of nylon threads made out of six fixed with aluminium channel powder coated and MS clamps or as per manufactures design / instructions complete all as specified and directed by Engineer-in-Charge.
S&F for Pre painted galvalume aluminium zinc coating GI based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L for Anodised Aluminium snap grid frame work for false celing all as spacified including dismantling existing board existing frame work complete all as specified and directed.
S&F Gypsum board of 12 mm thick for ceiling complete all as specified and directed.
S&F 15mm bore steel water tubing `medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.
S&F 20mm bore steel water tubing `medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.
Refixing old steel GI tubing 15 mm dia obtained from above item in new or old position, etc complete all as specified and directed.
Refixing old steel GI tubing 20 mm dia obtained from above item in new or old position, etc complete all as specified and directed.
S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm, white with integral foot rest and 'P' or 'S' trap, including provision of cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, excluding 32 mm dia. PVC flushing pipe complete all as specified and directed.
M&L for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
S&F Vitreous China wash basin (WHB), white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets and making good the damaged portion of wall or floor complete all as specified and directed.
Supply only PVC connection 15mm dia 600 mm long with brass fly nut at both ends complete all as specified and directed.
S&F Towel rail 600mm long of brass chromium plated tubular rail 20mm dia D type between flange fixed with including chromium plated brass screws and wooden plastic cleats complete all as specified and as directed.
S&F in repair 125mm dia brass chromium plated over head jet shower rose with arm and wall flange including fixing to steel pipe or union complete all as specified and directed.
S&F in repair pillar taps , cast copper alloy with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and directed.
S&F in repair 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair concealed stop valve chromium plated, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.
S&F Waste coupling suitable for 32mm dia bore of discharge pipe of PTMT (half or full threated) for WHB minium weight 45 gms complete all as specified and directed.
S&F Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed.
S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed.
S&F PVC 75 mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports for 110mm bore pipe complete all as specified and directed.
S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.
S&F PVC (SWR) junction single, equal or unequal 110mm dia complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.
S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 18/19 mm thick block boards interior grade 2 Quality interior grade veneered on both sides,commercial type, fixed with screws to timber frame work complete all as specified and directed.
S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination,fixed with screws to timber frame work, complete all as specified and directed.
S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
Extra over rates of 18/19 mm veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.
Extra over rates of 12mm veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.
S&F Channel patti for sliding rack (size of channel patti 40 mm wide for fixed portion and 35 mm wide for sliding portion and 1 mm thickness complete all as specified and directed.
S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed.
S&F brass dead lock of 75 mm size complete all as specified and directed.
S&F 150 mm aluminium anodised hasp and staple safety type with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 75mm aluminium anodised hasp and staple safety type with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F of 25 mm Harrison rails (Curtain rails) of anodised aluminium alloy chromium with fixing brackets stops, rollers etc complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for Concealed type Point Wiring complete including cutting chases in stone wall for conduits and sinkings for boxes and making good to walls, floors etc with 1.5 Sqmm single core multi standard copper conductor PVC (FRLSH) insulated sheathed cable (Phase and neutral) in and including PVC conduit heavy duty (Wall thickness not less than 2.0 mm) with accessories and pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with and including 1.50 Sqmm PVC (FRLSH)insulated unsheathed copper conductor for common earthwire and connecting to earth dolly for One light point/exhaust fan/ceiling controlled by one switch one way & ceiling fan with one way switch & regulator etc complete all as specified and directed.
All as per above item No. 156 here-in-before but for One socket out let 5 Amps 5 Pin on same board with other switch.
All as per above item No. 156 here-in-before but for One Switch socket Combined 5 Amps 5 pin on independent board
All as per above item No. 156 here-in-before but for One call bell point controlled by one bell push .
M&L for Concealed type Point Wiring complete including cutting chases in stone wall for conduits and sinkings for boxes and making good to walls, floors etc with 2.5 Sqmm single core multi standard copper conductor PVC (FRLSH) insulated sheathed cable (Phase and neutral) in and including PVC conduit heavy duty (Wall thickness not less than 2.0 mm) with accessories and pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with and including 2.5 Sqmm PVC (FRLSH)insulated unsheathed copper conductor for common earthwire and connecting to earth dolly for One Switch Socket combination outlet 16 Amp power point on Independent board etc complete all as specified and directed.
S&F Ceiling Rose 3 phase pvc polycarbonate isolated body complete all as specified and directed.
S&F Switch piano, flush type single pole, one way 6 amp complete all as specified and directed.
S&F Switch socket combination 2 in 1, 6A flush type complete all as specified and directed.
S&F Switch socket combination 3 pin 16 A flush type complete all as specified and directed.
S&F Modular switch 6 Amp 250 V AC one way one module complete all as specified and directed.
S&F Modular Switch Socket Combined, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S&F Modular Switch Socket 6/16A - 6 pin combined 2 module complete all as specified and directed.
S&F in repair Sub-main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wireof size 6 Sqmm including conduit /PVC casing/caping shall be measured as one length.
S&F in repairs Sheet metal enclosures distribution board double door, single pole and neutral (SPN) 12 ways, 415 Volts DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.
S&F in repairs Sheet metal enclosures distribution board double door, single pole and neutral (SPN) 8 ways, 415 Volts DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.
S&F in repairs Sheet metal enclosures distribution board double door, tripple pole and neutral (TPN) 4 ways, 415 Volts DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flashing in wall concealed complete making good and matching existing surface.
S&F Sheet metal enclosures distribution board where MCBs to be used single pole & neutral link of capacity 6-16Amps of 10Ka complete all as specified and directed.
S&F in repairs MCCB TPN,100 Amps .415 V in `C’ series having current rating 10 KA complete all as specified and directed.
S&F in repairs MCCB TPN, 63 Amps .415 V in `C’ series having current rating 10 KA complete all as specified and directed.
S&F MCB TPN,63 Amps .415 V in `C’ series breaking capacity 10 KA complete all as specified and directed.
S&F Miniature circuit breaker (MCB) SP, 6 - 32 Amps 240V in `C’ series breaking capacity 10 KA complete all as specified and directed.
S&F Miniature circuit breaker (MCB) SPN, 32 Amps in `C’ series breaking capacity 10 KA complete all as specified and directed.
S&F Miniature circuit breaker (MCB) SPN, 40 Amps in `C’ series breaking capacity 10 KA complete all as specified and directed.
S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete as specified and directed.
S&F environmental friendly sufrace mounted LED bulk head light fitting 1x9W/1X10W bulk head luminaires with high brightness IP 54 protections including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and and as directed.
S&F Surface Square LED 12W with premium diffuser to ensure glare free and even light distribution. connecting up with three core flexible copper conductor cable of suitable size complete all as specified and and as directed. Make: Havells Cat Part No. LHEAAKP7IL1W012 or equivalent of makes specified in Appendix "B"
S&F Canopy around Edges of street light for less scattering Made of aluminium with internal surfaced painted with reflective coating With all fixing accessories complete all as specified and as directed.
S&F Glass wall Light bronze and 8W complete all as specified and directed.
S&F 8W Bed Side Lamp Bronze complete all as specified and directed.
S&F 12W LED Bulb complete all as specified and directed.
S&F Lamp holder, Angle type, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F factory made Steel Tubular Swaged Poles type 410 SP-22 (8.5m long) for street light complete with CI base plate and finial including foundation and coping, Assemly to fix two street light on single pole with all Accessories complete as specified and directed.
Supply, lay, connect, joint, test and commission; LT XLPE insulated cable screened PVC bedded, galvanised steel strips or wire armoured electric power cable heavy duty with aluminium conductor of size 10 sqmm 4 core 1100 Volts grade (LT), ISI marked, laid in GI pipe/open space/fixed on poles, etc. complete all as specified and directed.
Supply, lay, connect, joint, test and commission; LT XLPE insulated cable screened PVC bedded, galvanised steel strips or wire armoured electric power cable heavy duty with aluminium conductor of size 16 sqmm 4 core 1100 Volts grade (LT), ISI marked, laid in GI pipe/open space/fixed on poles, etc. complete all as specified and directed. Note for Item nos187 & 188 : GI pipe shall be measured and paid separately under respective items of BoQ
Supply, lay and fix in replacement 40mm bore galvanised iron pipe light grade with all fittings as protection pipe for earth strips, laid in trenches, fixed on poles, walls and ceilings or laid in floors, laid in road crossing /hard standing/pole protection etc complete all as specified and as directed.
Haritwal traders
boon construction company
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .