MAINTENANCE OF INTERNAL FITTING and FIXTURE INCLUDING CONCEALED POINT WIRING WITH MODULAR SWITCH SOCKET IN OTM and OFFRS MD ACCN AT UMROI MIL STN UNDER GE UMROI

Amount

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Taking down carefully MCB DBs SP/TPby unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

Material and labour for point wiring for modular fittings for the followings with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC conduit of suitable size not less than 20mm (medium grade) concealed including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick walls.)

All as per Sr. Item No. 03 here in before but for One 3 Pin 5 Amps socket outlet point on independent board.

All as per Sr. Item No. 03 here in before but for One 3 Pin 5 Amps socket outlet point on same board alongwith other suitable switches.

All as per Sr. Item No. 03 here in before One light point controlled by two, two way switch.

All as per item No 3 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of modular switch one way 6 amps 1 module 240 Volts complete all as specifed/directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of modular switch two way 6 amps 1 module 240 Volts complete all as specifed/directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of modularBell push, flush type, 5 amp 1 module 240 Volts complete all as specifed/directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 240 volts 2 module complete all as specified/ directed. Make- Legrand / Havells / Indo Asian

Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make- Legrand / Havells / Indo Asian

Supply & Fixing of modular type ceiling fan regulator electronic step type ,2 module, 120 W complete all as specified and directed. Make- Legrand / Havells / Indo Asian

Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of bell electric, ding dong type 240 Volts, single pole complete all as specified and directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of ceiling rose 3 ph PVC/Polycarbonate complete all as specified/directed. Make- Legrand / Havells / Indo Asian

Supply and fixing of modular metal flush box 1/2 module.

Supply and fixing of modular metal flush box 3 module.

Supply and fixing of modular metal flush box 4 module.

Supply and fixing of modular metal flush box 6 module.

Supply and fixing of modular metal flush box 8 module.

Supply and fixing of modular white cover plate with frame 1/2 module

Supply and fixing of modular white cover plate with frame 3 module

Supply and fixing of modular white cover plate with frame 4 module

Supply and fixing of modular white cover plate with frame 6 module

Supply and fixing of modular white cover plate with frame 8 module

Supply and fix in repair LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.Make: Havell's Cat Part No: REGALBATTENT5UPTO1X18WDSBSWH for batten and TITANIANEO1213T8SSTL18WLED865SPC for tube light or HPL Cat part No: HPLEDT8 PC18(CW) for batten and HPLT81418PC(CW) for tube light or its equivalent in specified makes.

Supply and fixing in repair of MCB SPN DB 8 way double door, glazed type, IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. Make- Legrand / Havells / Indo Asian

Supply & fix in repair of MCB SPN 32 Amps 'B' Series 10 KA 240 volts complete all as specified/directed. Make- Legrand / Havells / Indo Asian

Supply & fix in repair of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts complete all as specified/directed. Make- Legrand / Havells / Indo Asian

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to earth lead wire 4 mm dia mm by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 540 mm x 540 mm x 50 mm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (light grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987, complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit concealed of adequate size with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through pvc conduit concealed and connected common earth dolly including taking out the old sub main wiring shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Material & labour for cutting of circular hole at any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour complete as directed and specified by engineer-in-charge.

Supply & fix plastic body exhaust fans AC single phase 230/ 240 V of size 225/250 mm sweep with louvers, complete as directed and specified by engineer-in-charge.

Supply and fixing of wall mounted LED batten with polycarbonate housing and integrated electronic driver of capacity 12 W.Make: Philips cat part No. 31403 12-Watt LED Picture Light (Gold) or equivalent to surya/havells

Supply and fixing of 9 Watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting , total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum) , CRI 80 (minimum) & taking down complete all as specified and directed. Make- Syska LED / C&S / Crompton / Phillips / Halonix

S&F Recess mounting light that mimics the pattern of sun from dawn to dusk by changing the color temperatures,recessed mounted 2x2 liminaire suitable for armstrong/Grid ceiling. Fixture size: (LxWxH) in (595x595x65)mm. Make- Havells ,Item description- PLUTONEO2X2PLR28WLED840S or euivalent make of Philips/CG/Bajaj Note: Taking down of old unserviceable fitting is included in the quoted rate.

Taking down aluminium submain wire along with damaged casing caping /PVC conduite pipe from the wall roof or floor and making good distrubed surface complet all as specified and directed by Engr-in charge

Supply & Fix PVC blanking plate, one model sutable for Modular box complete all as specified and directed Make : Legrand/Havells/ L&T

Material & labour for Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 1.5 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 1.5 Sqmm cable one run of casing capping and one run of 1.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Supply and fixing wall light Ivory Fabric, chrome finishing 4W complete all as specified and directed. Cat Part No: KWB-CHR-MB12021201A of Make: Jaquar or its equivalent in Philips/Bajaj

Supply and fixing warm white bed light/ wall lamp of 3 W capacity all as specified and directed. Make: D'Mak 3W wall lamp or its equivalent in Philips/Bajaj

Schedule of Credit

M/s Jaiswal and Co