Loading…
Loading…
Tender Value
₹18.5 L
EMD Value
₹50,000
Closing Date
27 May 2026, 9:30 pmClosed
Directorate of Municipal Administration
Riyaz Ahmed Hubballi
Sitting arrangements and electrification work at Mayor office Deputy mayor and opposite leader at ward No.13 zone-03
DMA/2025-26/OW/WORK_INDENT55327
DMA/2025-26/OW/WORK_INDENT55327
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹50,000
8 May 2026
8 May 2026
20 May 2026
Sitting arrangements and electrification work at Mayor office, Deputy mayor and opposite leader at ward No.13 zone-03
Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted with cushion padding, springs,
Providing, Supplying and Installing of Chair Type Non-Revolving and Non-Tilting chair with Armrest (Members Chairs) Chair frame type Cantilever Armrest type Moulded armrest continuously fitted with se...
Executive Chair .(SE Approved Rate)
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W),X2.75(H) ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per direction of engineer in charge...
Worshipful Mayor’s Executive Chair. Providing, Supplying and Installing Mayor's Wooden Executive Chair at Sabha Bhavana of minimum size 700x650x450mm & with a back seat height of minimum 1200mm from...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets (PWD SR 2023-24 Vol No.02 P.No.106 SI No.12.67.2))
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the sl...
Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the sl...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (E...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...
Metal modular box:
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...
Metal modular box:
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...
Metal modular box:
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...
Metal modular box:
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...
modular Switch Plate
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
modular Switch Plate
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
modular Switch Plate
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
modular Switch Plate
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1)6Amps one way.
Basic Rate - 102=00 Wtg 5% - 6=10 Total ...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 3.14.8) 6A Bell Push.
Basic Rate - 70=00 Wtg 5% - 3=50 Total - 73=50 PWD Ele SR 2023-24 Page No.9 ...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 3.6.3) 6A Three Way socket Basic Rate - 171=00 Wtg 5% - 8=55 ...
Modular 16A Switch
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 3.6.7) 16A One Way Switch Basic Rate - 180=00 Wtg 5% - 9=...
Modular 16A Socket
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 3.6.10) 6/16A Universal Socket Basic Rate - 236=00 Wtg 5%...
Stepped Fan Regulator.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.4)Stepped Fan Regulator Two Module Basic Rate - 3...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 3.14.7) 6A Batten Holder
Basic Rate - 74=00 Wtg 5% - 3=70 Total - 77=70 PWD Ele SR 2023-24 Pag...
LED Tube Fitting
Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60...
LED Fitting fixing Charges
Fixing all types and all capacities of fluorescent /false ceiling / spot
light / CFL / LED fittings indoor on the wall/ ceiling / rafters /
girders using 23/0.0076"" twin tw...
Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with doub...
Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with ne...
Wall Mounting Fan
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 6.5.1) 300 mm Sweep
Basic Rate - 2492=00 Wtg 5 - 124=60 Total - 2616=60 PWD Ele SR 2023-24 Page No.5...
Supplying exhaust fan of 1440 RPM of 300 mm (12"") size with bracket blades complete for light duty suitable to operate on 230V
50Hz, AC Supply.
Basic Rate - 1492=00 Wtg 5% - 74=60 Tota...
Exhaust Fan Fixing Charges Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts a...
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit...
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit...
MCB distribution boards
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacit...
Air conditioners
Supplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with
hermetically sealed inverter compressor with air cooled conde...
Air conditioners Installation charges Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0...
Earthing 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete
Minimum Weight of GI Pipe: 7.3 Kg
Basic Rate - 743=00 ASL 5% - 37=15 T...
Burnt charcoal 51.02)Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each Basic Rate - 676=00 ASL 5% - 33=80 Total - 780=80 Hescom SR 2023-24 Item c...
Salt 1.6.1)Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Basic Rate - 310=00 ASL 5% - 15=50 Total - 325=50 Hescom SR 2023-24 Item code 51.03 (Material Cost)
Digging of Pit 1.6)Digging of Pit for providing GI Pipe type Earthing 1.6.1) Ordinary Soil Basic Rate - 759=00 ASL 5 - 37=95 Total - 796=95 Hescom SR 2023-24 Item code 1.6.1 (Labour Cost)
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. with Remote.
Supply and fixing polished wood board made of not less than
15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs scre...
Indoor LED Fittings
Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDswith C...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
55327 kw-2 doc.doc
Tender Document • 4.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .