SPECIAL REPAIRS TO BLDG NO T-161 AT ZAKHAMA MILITARY STATION

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position,complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering.complete all as specified and as directed.

Dismantling boarding,any description, fixed in any position with nails.complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and segregating serviceable materials and keeping for reuse at site and removing unserviceable materials from site of work complete all as specified and directed

Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each, complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each.complete all as specified and as directed.

M& L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar (1:4) and even and smooth without using extra cement including mixing of water proofing compound wherever required .complete all as specified and directed. Note :WPC shall be measured & paid seprately.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar (1 :6) and finishing even and smooth without using extra cement. complete all as specified and directed.

Supply only water proofing compound ISI Marked, complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using(12.5mm graded stone aggregate) as in flooring for level course, complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:4) for laying under floor finishes,complete all as specified and directed.

M&L for joint free Non skid ceramic tiles 7 to 8 mm thick (square/rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles.complete all as specified and directed.

All as per Item No 14 above hereinbefore but in skirting including necessary cutting of tiles.

M&L for second class hardwood as in scantlings clean sawn timber framed and fixed. complete all as specified and directed.

M&L for 4mm thick plywood, grade BWR,type BB, fixed with nails to timber frame work, complete all as specified and directed.

All as per item No 17 above but except plywood.

S&F 0.63 mm thick Galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type /J-typer or cranked hook bolts and washers, in roofs, etc with zinc coating 275 grade ,complete all as specified and directed.

Labour only for refixing 0.63 mm thick Galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type , J-typer or cranked hook bolts and washers, in roofs, etc ,complete all as specified and directed. Note :New L-type/J-typer or cranked hook bolts and washers required shall deemed to be includede in quoted rates

S&F 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zince coating 275 complete all as specified and directed.

S&F 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nail complete all as specified and directed.

Labour only for refixing 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete with grade of zince coating 275. fixed with nail complete all as specified and directed.Note :Nails (length and girth as fixed) required shall deemed to be includede in quoted rates

M&L for 4mm thick non asbestos fiber cement board fixed to GI frame work complete all as specified and as directed

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified and directed.

M&L for preparation of new undecorated surfaces of wood/ceiling by brooming down and scraping where ever necessary and applying two oil emulsion distemper white or tinted complete all as specified and directed

M&L for 20mm to 25mm thick IInd class HW weathering boarding, wrought both sides and edges shot and chamfered ( on exposed edges) , rebated on thick edge to give 20mm laps. complete all as specified and directed

S&F mild steel wind tie bar for roof including securing nuts bolts and washers conforming to Fe.290 Gde- E-165.complete all as specified and directed

S&F 35mm thick II nd class hardwood panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face veneers.complete all as specified and directed

All as above as in windows shutters 30mm thick divided into squares, with plain, chamfered or rounded , mitred or rebated sash bars with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) . complete all as specified and directed

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed.

S&F in repairs plain fillets exc 3cm and n exc 6 sqcm sectional area in IInd class hardwood, square, rectangular or triangular in section, wrought, secured with nails, Complete all as specified and directed.

Hacking out old broken glass ( any thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. Complete all as specified and directed.

M&L for 3mm sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane. Complete all as specified and directed.

M&L for 100 mm long Butt hinges med weight cold rolled mild steel and fixed.Complete all as specified and directed.

M&L 75mm long Butt hinges med weight cold rolled mild steel and fixed, Complete all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed. Complete all as specified and directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed. Complete all as specified and directed.

S& F 150mm long extruded aluminium alloy handles, fabricated type, anodised and fixed. Complete all as specified and directed.

S & F 100 mm long extruded aluminium alloy handles, fabricated type, anodised and fixed, Complete all as specified and directed.

S& F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. Complete all as specified and directed.

S&F in repairs 300mm long mild steel, ordinary rat tail rod pattern springs including roller and roller plate, Complete all as specified and directed.

S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor, Complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all neacessary' labours ; articles nexc 200 cu.cm each.Complete all as specified and directed.

S & F 50mm long Butt hinges med weight cold rolled mild steel and fixed, Complete all as specified and directed.

M&L in repairs. for Prelaminated Particle Board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with nails for pelmet boxes, complete all as specified and directed.

S & F in repairs 20mm dia mild steel chromium plated curtain rods with and including fixing socket complete all as specified and as directed.

M&L for preparation of old wooden surfaces and wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and directed

M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paiint complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint complete all as specified and directed.

M & L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates as in plinth protection finished fair and even.complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer or mortar for laying floor finishes in Cement Mortar (1:6), complete all as specified and directed.

M&L for chequered cement concrete tile 25CM x 25CM x 19 to 20 mm thick with grey cement and no pigment set, jointed and pointed in neat cement slurry. complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed multistranded copper conductor FRLS cable of size 1.5 Sqmm nominal area 1100 volt grade drawn through and including PVC casing-capping/conduit of suitable size with all fittings and accessories including PVC board with cover of suitable size for housing/mounting the switches/socket etc including 1.5 Sqmm PVC insulated unsheathed single core copper conductor as earth continuty wire connected to common earth dolly for one light/exhaust fan point control by one switch.one way compleate all as specified and directed.

All as per item No 59 here- in- above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No 59 above but for 3 pin, 5 Amp Socket on the same board.

All as per item No 59 above but for 3 pin,5 Amp Socket on independent board

S&F switch piano flush button single pole one way 5 Amp.complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin 05 Amp flush type universal. complete all as specified and as directed.

S&F switch socket combination 5 Pin, 16 Amp flush type.complete all as specified and as directed.

S&F LED bulk head luminaires 10 W 6000k Endura Rugby Neo N -IP-65 environmental friendly ultra modern energy saving, surface mounted, decorative oval bulk head edge-lit comprising of high brightness LEDs complete all as specified and as directed. Make-Havells Cat No RUGBYNEONFT10WLED860SSYMTOP or eqvt make of Bajajaj/Philips

S&F ceiling rose surface back light 65 x 25mm, two to three terminal.complete all as specified and as directed.

M&L Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Lumino LED lamps 10W E27WW Ball lamp lumen output 1020 Im 3000K color temp current 0.055 amps complete all as specified and as directed. Make - Havells ordering code LHLDERHEMD8X010 or eqvt make of philips, bajaj

Taking down old unserviceable light fitting of any type any rating and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

S&F MAXOLED batten with Maxo LED type 20WLED 6000K T8 LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient, 230V. 50Hz complete all as specified and directed. Make-Havells Tube cat part -LHLDEFXD5L8R020 & batten cat No LHFXCEP1TNNW020 or eqvt make of philips, Bajaj.

Taking down old unserviceable DB/Main switchs incl MCBs wooden block of any size and type and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

S&F PVC rectangular block of size 250x200x50mm depth, complete all as specified and as directed.

S&F PVC rectangular block of size 100x100x50mm depth complete all as specified and as directed.

S&F sheet metal enclosure for DB when MCB to be used 8 way 200 amp rated bus bar, SPN 240V, double door complete all as specified and directed..

S&F sheet metal enclosure for DB when MCB to be used 2 way 200 amp rated bus bar, SPN 240V, single door complete all as specified and directed..

S&F 32 amps, 240 V Isoltar DP complete all as specified and directed.

S&F MCB Single pole and neutral 240 Volts, 20 t0 32. Amps,c-series,complete all as specified and directed.. Make -havells, cat No.DHMGCSNF006-032

S&F MCB Single pole 240 Volts 5 to 32 Amps,c-series,complete all as specified and directed.. Make -havells, cat No DHMGCSPF006-032

Taking down the existing unserviceable sub main wiring/Under ground cable of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes .complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor surved with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or rouind or 16 sq mm cable.

M & L for Sub main wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid 20 mm PVC rigid , ISI marked and its accessories duly PVC conduit concealed in wall/ roof / floor including cutting chases and finishing properly matching with surroundungs one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/ main board complete all as specified and as directed.

Dismantling house service brackets, any type and decription as existing at site including making good the disturbed surfaces to match with the existing finishes .complete all as specified and as directed.

S&F House service bracket (Hook type) complete with 3.0 meter long GI pipe 40 mm dia Med grade, two Nos 90 degree bends, MS hooks and stay or guy..complete all as specified and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron or steel and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmx30cmx10cm with one handle for lifting made out of 8mm dia MS bar, watering pipe 20mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I including taking down the existing,complete all as specified and directed.

m/s chakraborty enterprises

M/s MATRI ENTERPRISES