Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.3 LAccepted-AOC 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹29.9 L+₹1.1 L (3.77%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹32.0 L+₹3.2 L (11.1%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹32.2 L+₹3.4 L (12.0%)Rejected-Finance | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹32.7 L+₹3.9 L (13.7%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹47.4 L
EMD Value
₹94,740
Closing Date
6 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
SPL REPAIR TO 05XLADIES AND GENTS TOILET (OFFRS) AT BLDG NO P 103 (EDUCATION BLOCK) AND 01XLADIES AND GENTS TOILET (OFFRS) NEAR DRILL GROUND OF OTC, AMC C AND C AND 05XTOILET BLOCKS OF BLDG. NO P 157 (CHOPRA COY) OF NO 1 TT WG UNDER GE (EAST) LUCKNOW
2023_MES_589810_1
GE/E/LKO/T-05 of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹94,740
Yes
16 Jun 2023
17 Apr 2023
8 May 2023
17 Apr 2023
6 May 2023
1 May 2023
Amount
Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed
Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.
Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area not exc 1.5 sqm each complete with hold fasts etc complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area exc 1.5 sqm but not exc 4.0 sqm each complete with hold fasts etc complete all as specified and directed.
Taking down shutters of any description exc 1.0 sqm and not exc 2.00 sqm each shutter complete all as specified and directed.
Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.
M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar in CM (1:4) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (Note:- WPC shall be measured and paid separately 'Only')
M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floors etc complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exc 0.11 Sqm but not exc 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
S&F pressed steel frames of size 105 x 60mm for doors with one or more rabtes including necessary fixing lugs, hinges, lock strike plate, etc ocmplete all as specified and directed.
M&L for 30mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, both faces are covered with decorative face veneer lamination with lipping / frame as approved to match complete all as specified and directed.
S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
S&F solid PVC frame (Single Rebated ) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
S&F factory made solid PVC profiled panel door shutter 28mm thick with intergal skin as frame & 3mm thick high pressure compact laminate on both side of approved colours as infill , with C- type GI or 40 x20 x19 of MS pipe as stifffiner & supplying & fixing in frame at site as sper specifications & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour) PVC sheet on the front face & 2mm prelam (Nut Brown colur) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.
S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane including hacking out old broken glass complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.
S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed.
S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.
M&L cutting holes in brick walls (not exc half brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed.
M&L for mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed.
Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
S&F 15mm GI water tubing (concealed type), medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 20mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D" type 60cm long between flanges complete all as specified and directed.
S&F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.
S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, float valve, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
S&F in repairs 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
Taking out old U/S water closet and S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed
S&F in repair vitreous china Pedestal Pan EWC (Couple closet Bowl) of size 370 x640 x760 mm including UF seat cover, hinges, S trap -220mm, accessoreis set etc and vitreous china ware flushing cistern complete all as specified and directed.
S&F in repair vitrous china, table top, wash hand basin of size 600mm x 435mm x 180mm, fancy type including 32mm dia waste coupling ans waste pipe complete all as specified and directed.
Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.
Taking down 100mm / 75mm dia AC rain water pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Note:- AC rain water pipe shall be measured over all as fixed along the centre line over the fittings and accessories)
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) 50mm thick as in plinth protection finished fair & even laid in alternative bays not exc 2 meter in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.
S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for three coats of white wash on walls including preparation of newly/ old plastered surfaces complete all as specified and directed.
M&L for three coats of white wash on ceiling including preparation of newly/ old plastered surfaces complete all as specified and directed.
M&L for preparation of old plastered surface on ceiling surfaces and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old plastered of wall surfaces and applying one coat of white wash complete all as specified and directed.
M&L for preparation of newly/ old plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed.
S&F in repair 15 mm stop valves, cast copper alloy, chromimum plated, with long shank and cup concealed type complete all as specified and directed.
S&F in repair 15mm bore pillars taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F in repair 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed
S&F in repair CP soap dish fancy type with chromium plated brass screws completed all as specified and directed
S&F in repair health faucet (ABS body ) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 150 Mtrs but not exc 250 Mtrs away complete all as specified and directed.
M&L for mass concrete filling using PCC (1:5:10) type E-2 in sunken floor complete all as specified and directed.
M&L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic base polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg /Sqm mixed with composit compound @ 0.253 Kg /Sqm, & the second layer slurry @ 0.242 Kg /Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyflim with adhesive complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, ans steel peg stay complete with glazing bars, dovetailed and welded,complete all as specified and directed.
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.
M&L for 16 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms, wash basin platform and urinal partitions and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed.
Dismantling / taking down existing unserviceable RCC/PVC water tank and S&F 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.
Dismantling / taking down existing unserviceable RCC/PVC S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed
S&F in repair Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed
M&L for preparation of old painted steel and iron surfaces of any description over 10CM width or girth and applying one coats of synthetic enamel paint over a coat or red oxide primer complete all as specified and directed.
S&F in repair 20mm bore Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.
S&F in repair wash hand basins vitreous china, coloured in oval shape of size 450 x300x 150 fixed in granite stone complete all as specified and directed..
S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F in repair CP brass toilet paper holder all as specified and directed.
S&F auto concealed hinges SS size 103mm x 64mm x 28 mm suitable and ward rope complete all as specified and directed.
S&F PVC cupboard with frame and shutter in required sizes at site made out of 18mm thick one side decorative lamination sheet / mica & other side balancing lamination consisting of carcass 18mm thick PVC sheet & all required brackets ss screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered wih 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirement as per make and specification mentioned as per drawing complete all as specified and directed
S&F stainless steel handles, 150mm size with finish matching the requirment of revelant code complete all as specified and directed
S&F in repair towel ring 200mm dia and made out of 8-10mm dia hollow tubes superior quality complete all as specified and directed.
S&F in repair glass corner shelves fancy type 6mm thick 225 x 225 mm size complete all as specified.
S&F in repair glass shelves fancy type 8 to 10mm thick glasss 550mm long complete all as specified and directed.
S&F in repair aluminum ventilator (louvers) with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings including 3.8mm thick glass and stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed.
S&F in repair aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc complete including aluminium and rubber beading complete all as specified and directed.
M&L 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub-floors, sub-bases, etc complete all as specified
M&L for chequered cement concrete tiles reflective type of size 20cm x 20cm x 25cm thick, set, jointed and pointed with grey cement and pigments over 15mm screed bed in cement mortar 1:6 complete all as specified and directed.
S&F steel ventilators fixed type with glazing bars complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per item No 106 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per item No 106 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Item No 106 here-in-before but point wiring with 2.5 sqmm single core FRLS cables and earth continuity wire of 1.5 sqmm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
S&F in repair switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
S&F in repair socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
S&F in repair switch socket combenation 2 in 1 outlet 3 pin, 5 A flush type complete all as specified and directed
S&F in repair switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,Philips cat no TMC 501P1XT-LED22W P 3241
S&F in replacement LED tube light fittings 10 Watt, 6500K of two feet long energy effcient etc including connecting up complete all as specified and directed.Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips as approved by GE
S&F in repair ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
S&F exhaust fan PVC Body 300 mm sweep, 230Volt , single phase silent proof, complete all as specified & directed.
Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
S&F in replacement SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified and directed
S&F in replacement MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.
S&F in replacement MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed
S&F LED building security light 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed.
S&F LED tube light fittings 600 mm, 10W, 240V, 50Hz, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.
Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
S&F in replacement TPN MCB DB 4 ways ,Double door with 415 Amps, Double door type complete all as specified and directed .
S&F in replacement MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breking capacity-16 kA complete all as specified and directed .
M&L for Earthing including earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 (Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner).
m/s durgesh traders & constractions
m/s raghubar dayal
KUMAR ENTERPRISES
M/S Reliance Construction
QUALITY CONSTRUCTIONS CO
M/S S S A ASSOCIATES
M/s Rathore Traders
M/S SHIVA CONSTRUCTION
Abode Artisan Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .