REPAIR TO SECURITY FENCING, PATH AND HARD STANDING AND RETAINING WALL AND ALLIED WORKS AT PEDONG, ALGARAH, AP ALGARAH, TEESTA TCP AND DALAPCHAND UNDER GE 867 EWS

Amount

Dismantling of brick work or stone/boulder/block mansonry all quoins, arches, pillars, etc built in cement mortar complete all as specified and as directed.

Demolition of concrete block walling built in Cement mortar including all quoins, arches, pillers etc complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm in and setting in CM 1:6 complete all as specified and as directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm except block and setting in CM (1:6) complete all as specified and as directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc.10cm except block and setting in CM (1:6) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L PCC Type D2 (1:4:8) (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 100 mm thick cement concrete type B-2, (1:2:4) (using 40mm graded crushed stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

M & L providing cement concreteType C1 (1: 3 : 6) (using 20 mm graded stone aggregate) in coping ,steps,sesmic and simillar bands, plinth course, string course, parapets and railings, bed plates, including weathering slightly rounded or chamfered angles and throating as directed all as specified and as directed.

M & L precast cement concrete Type B0 1:2:4 (12.5 mm graded aggregate ) set in cement mortar 1:4 louvres and jallies, 25 mm thick (measured soild), including all moundlings & frame complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed fixed in as weep hole complete all as specified and as directed.

M & L for flush pointing to concrete block walling in cement mortar (1:4) all as specified and as directed.

M & L 10mm thick rendering on fair faces of brick work or concrete surface in CM (1:6) complete all as specified and as directed.

M & L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1 (1:2:4) (20mm graded aggregate) as in band of retaining wall complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spcified and directed.

All as per item No.16 but 6mm to 8mm dia complete all as spcified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, lintels, cantilivers , shelves including suports, overhangs etc . Also splays between floor and beams etc complete all as specified and directed.

Dismantling of Post or Struts (Wood,Steel or RCC) fencing posts or struts any section, including taking out embedded portion and making good disturbed ground, Post emeded in Concrete, brick work, masonry, etc. complete all as per specified and directed.

Dismantling wire mesh fencing complete any type all as per specified and directed..

M & L excavating in post holes (or similar holes) each n exc 0.5 cum , getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 m and making good surfaces in hard/dense soil complete all as specified and directed.

M & L PCC Type C2 (1:3:6) (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

S & F galavanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire.

Supply only chain link MS galvanised fencing any size or type.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and directed.

S & F Hot-Rolled steel unequal angles embedded in concrete and screwing etc, securing bolts, post and struts in fencing including cutting tops to shape as directed, drilled holes , notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or riveting , etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, length n exc 6 cm and dia of neck 11 to 15 mm complete all as specified and as directed.

M&L mild steel gd.I. IS-432 (Part I) round Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and as directed.

M & L for new or prevously untreated surface of any description not exc 10 cm in width or girth when unconnected with other painting or painted in different tint applying two coat of synthetic enamel paint over priming with Red oxide zinc complete all as specified and directed.

M&L for new surface of steel and iron surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer including prepration of surface complete all as per specifed.

M & L for preparing new steel surfaces of any description exc 10cm width or grith and applying two coats of black Japan paint complete all as specified and directed.

Demolition of stone slabs or tiles of any description or thickness in floors, aaprons stc laid and bedded in cement mortar complete all as specified.

M & L 75 mm thick type C-2 (1:3:6) cement concrete ( 40 mm graded agggregate) complete all as specified and directed.

M & L chequred cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigmnet any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade with colour rubber finishes on top over sand dust cushions. Note - Sand for cushioning will be measured and paid seperatly

M & L for sand filling ( as cushioning under interlocking paver block) including watering and consolidation complete all as specified .

M&L for cement concrete Type B-1, (1:2:4) (using 20mm graded stone aggregate) as in kerbs for interlocking tiles etc complete all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

ANTHONY PRADHAN

MS BRAHMA CONSTRUCTION

RAMESH GURUNG

PRASAD PRADHAN AND SON

DEEP CHANDRA JOSHI

HEM RAJ GURUNG

G K SUTHAR