Providing handrail for OHT of Tower blocks and other allied works in Anupuram Township.

Amount

Providing and fixing in position Aluminium partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows north light glazing, sliding shutter 'E' Channel, trellis, etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of "JINDAL" or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge. NOTE:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc., 2. Glazing, particle boards, Aluminium grills, mesh etc., will be paid separately under relevant items. 3. All fittings except under Note-1 will be paid separately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost. 5. The aluminium section shall be anodized with "MATT FINISH" (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge.

Providing and laying brick masonry in Cement Mortar 1:6 with well burnt chamber bricks / FALG Bricks of approved quality in all shapes and sizes including scaffolding, curing, raking out joints, etc., all complete as per specifications and as directed by Engineer-in-charge.

Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete surfaces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]

Providing Painting over all exposed surfaces at all heights over plain plaster with Two Coats of premium exterior emulsion paint of make Asian (APEX - Dust proof exterior emulsion) / Berger (Anti dustt weather coat) or other approved equivalent make of approved shade over a coat of exterior wall primer of make Asian / Berger or other approved equivalent make including preparation of surfaces, curing, scaffolding etc., all complete as per specifications.

Supplying, fabricating and fixing Steel work welded in built up sections and framed work at all lifts comprising Chequered plates, MS angles, other structural steel sections, etc., of TATA or SAIL or approved equivalent make including cutting, welding, bending to shape, painting exposed faces 2 coats of metal coat PU finish paint of make MRF or other approved make over one coat of epoxy zinc phosphate primer with thinner 1110 Ep for epoxy primer and thinner for finish for metal coat paint as per manufacturer instructions embedding with Cement concrete, if necessary, etc., all complete as per specifications and drawings. [Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedment's for fixing the steel works.]

In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works

Supplying, fabricating and fixing Structural Steel work in built up sections for gate, handrailing, trusses and framed work at all lifts comprising square / rectangular / Tubular hollow sections conforming to relevant IS standard of TATA or SAIL or approved equivalent make including cutting, welding, bending to required shape for curved profile, hoisting, fixing in position at all lifts, embedding with cement concrete, painting the exposed faces with 2 coats of metal coat PU finish paint of make MRF or other approved make over one coat of epoxy zinc phosphate primer with thinner 1110 Ep for epoxy primer and thinner for finish for metal coat paint as per manufacturer instructions, etc., all complete as per specifications and drawings. [Note: The rate shall be inclusive of lifting arrangements if any required to hoist, concrete embedment's and foundation bolts for fixing the steel works.]

Providing and fixing M10 expansion anchor fasteners of make Hilti or other approved make in RCC/ brick masonry at all lifts including drilling hole using hammer drilling or diamond core drilling, cleaning the hole using hand pump for blowing out dust, setting the anchor in position, checking the anchor setting, fixing the steel members with approved thickness of washer and nut, checking the installation, etc., complete all as per manufacturer specifications and as directed by the Engineer-in-charge.

M10 x 153 stud anchor with effective anchorage depth of 80mm of make Hilti [HSA-R-(SS316)] or other approved make for RCC members.

Dismantling Plain cement concrete/Brick bat coba at all lifts including clearing and depositing the same within a lead of 2km etc., all as directed by Engineer-in-charge.

Dismantling Reinforced cement concrete at all lifts including clearing and depositing the same within a lead of 2km etc., as directed by Engineer-in-charge.

Dismantling Brick work in cement mortar at all lifts including clearing and depositing the debris within a lead of 2km etc., all as directed by Engineer-in-charge.

E. Sivaraman (BID ID -3124117)

RR ENTERPRISES (BID ID -3124275)

Bidder Name

RR ENTERPRISES

SRI MARUTHI CONSTRUCTIONS

E. Sivaraman