Periodical services to MD Accn under AGE B/R-I under GE (N) Bikaner at Mil Stn Bikaner

Amount

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4, 2nd layer mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, including taking down cement plaster or cement lime plaster, brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed. Note : - Supply only integral liquid water proofing compound shall be measured and paid for separately.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, including taking down cement plaster or cement lime plaster, brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick rough cast plaster in cement and sand mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12mm depending on the texture required) mixed with 6 to 12mm mm depending on the ratio 1:1:1 including taking down cement plaster or cement lime plaster, brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed. Note : The rate quoted shall be deemed to included for necessary use and waste of form work if required and nothing extra shall be paid on this account.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra including taking down cement plaster or cement lime plaster, concrete surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.

M&L for preparation of newly plastered / unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer by using roller / spray machine over new surfaces etc complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer by using roller / spray machine over new surfaces etc complete all as specified & as directed.

M&L for preparation of old surfaces plastered or unplastered of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulsion distemper (OBD) of approved shade/tint including comices by using roller/spray machine and filling depressions / cracks by using wall care putty as desired smoothening of surfaces complete all as specified & as directed.

M&L for preparation of old surfaces plastered or unplastered of ceiling including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified & as directed.

M&L for complete removal of existing treatment on walls by scraping, sand paparing or by using mechanical sander / grinder etc of walls and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of alkali resistant priming paint on walls all as specified and as directed.

M&L for complete removal of existing treatment on walls by scraping, sand paparing or by using mechanical sander / grinder etc of walls and applying two coats of weather proof acrylic emulsion paint (exterior grade) of approved shade/tint over a coat of primer by using roller / spray machine complete all as specified & as directed.

M&L for preparation of new plastered/unplastered surfaces of walls and applying two coats of weather proof acrylic emulsion paint (exterior grade) of approved shade/tint over a coat of primer by using roller / spray machine over new surfaces etc complete all as specified & as directed. Note:- The warranty for the same will be provided by the contractor as prescribed by manufacturer and for the same contractor will be repaired if any defects raise for the warranty life. No claim will be made by the contractor in this regard.

M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paints of approved tint on walls by using roller/spray machine complete all as specified & as directed.

M&L for applying water proof wall care putty on new or old surfaces of wall/RCC surfaces/ soffits of chajjas/roof projections/ cantilevers/ balcony etc (average thickness 1-1.5mm as required for desired smoothness and levelling of surfaces in two or more layers) including sand papering after filling the putty to make surface smooth and ready for receiving primer painting complete all as specified and as directed.

M&L for applying acrylic wall care putty average 2mm thickness on new or old surfaces of wall/RCC surfaces/ soffits of chajjas/roof projections/ cantilevers/ balcony etc by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving primer painting complete all as specified and as directed.

M&L for applying smartcare damp proof/ damp sheath coating of approved brand at damped area as manufacturer's instructions before applying putty/ primer/paint complete all specified and as directed by GE.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary obsecrured or frosted quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for writing letters or figures (Block, Roman, Italic.or Indian) not exceeding 30cm high complete all as specified and directed.

M&L for removing up roots of vegetation growth on building roof top/ sides of walls of any height n exc 30cm girth and applying suitable acid for burning of the roots in the RCC/ brick wall surfaces including stacking of serviceable materials and disposal of unserviceable materials to a distance n exc 50m and cleaning of site and making good of the disturbed surfaces in brick work in CM 1:4 and rendering 10mm thick plaster in CM 1:4 or pointing in the same mortar surface area n exc 1 sqm in each place complete all as specified and as directed.

J AND K CONSTRUCTION CO (BID ID -3206756)

M/S BUDHRAM BISHNOI (BID ID -3204711)

M/S SIDHU CONSTRUCTION COMPANY (BID ID -3207144)