IMPROVEMENT TO ARMOURY, MINI ARMOURY, DWSA AND GUARD POST AT 7BRD AND PROVN OF PVC DOOR AND RACKS FOR INBUILT ALMIRAHS AND ASSOCIATES WORKS IN CIVILIAN QTRS AT 7BRD UNDER GE (AF) TUGHLAKABAD

Amount

S&F of 18mm solid pvc ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screw, solvent cement/adhesive including beading, frame and necessary fittings complete all as specified and directed by Engr-in-charge.

S&F of continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-charge.

S&F of 12mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by Engr-in-charge.

S&F of aluminium two/three way sliding track frames/channels fixed with screws complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in patches not exceeding 3 Sqm in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparation of old/new decorated plastered surfaces of walls by brooming down or steel sire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required complete all as specified and directed by Engr-in-charge.

S&F of brass 4 lever locks, cupboard, grade-I, size 50mm complete all as specified and directed by Engr-in-charge.

S&F of extruded brass handles, 75mm fabricated type polished for cupboard complete all as specified and directed by Engr-in-charge.

S&F of catch magnets for cupboard complete all as specified and directed by Engr-in-charge.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge

M&L for Rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for Rendering 15mm thick in cement mortar in (1:4) in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note WPC shall be measured and paid separately.

M&L for Rendering 5mm thick in cement mortar in (1:3) on ceiling even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparing new surfaces of walls and applying two coat of Oil bound distemper over a coat of primer on new surface complete all as specified and directed by Engr-in-Charge

All as per item No 14 but three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge

All as per item No 14 but two coats of cement base paint on wall complete all as specified and directed by Engr-in-Charge

Roughening the concrete surfaces by wire brushes and washing down to remove dust foreign materials etc. flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge.

M&L for 25m thick plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone aggregate as in roof for maint, the uniform slope etc any thickness at any height and in any position complete all as specified and directed by Engr-in-Charge at site.

M&L for 15mm thick cement plaster in CM (1:4) with a mixture of water proofing compound @ 3 % by weight of cement on dried concrete surface finished fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- Water Proofing Compound shall be measured separately

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge

M&L for roof surface thoroughly wire brushed washed, dried up and cleaned of all foreign matter and dust to receive primer (b) On the dried roof surface one coat of approved bitumen primer @ 0.25 to 0.30 ltrs per Sqm shall be applied, On this primed surface the polymerized modified bituminous water proofing membrane with non woven polyester APP membrane having weight @ 3 Kg/Sqm & minimum thickness 3mm shall be laid by torch application method. The overlap while torching shall be 100mm on length side & 100mm on width side of membrane as per manufacture instructions, finishing of top surfaces by two coats of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.20 Kg/Sqm complete all as specified and directed by Engr-in-Charge and as per manufacture instructions.

M&L for cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand in 1:1CM (by weight) complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate to weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge

All as per item No 24 but exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge

S&F for anodised powder coated aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-Charge

S&F anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron) Sliding, window, ventilator shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each shutter, including all fittings anodised aluminium snap beading screws etc complete all as specified and directed by Engr-in-Charge

S&F anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, including all fittings hinges, anodised aluminium snap beading screws etc complete all as specified and directed by Engr-in-Charge

S&F 5.5 mm thick sheet glass doors ordinary quality and glazing with rubber beading in square exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge

S&F 4mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading in square exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F aluminium extruded section body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F for solid PVC door frame of Size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced complete all as specified and directed by Engr-in-Charge

S&F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail, bottom, lock rails on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed by Engr-in-Charge

S&F for stainless steel butt hinges with stainless steel pins 100mm size complete all as specified and directed by Engr-in-Charge

S&F for aluminium anodised barrel tower bolts of extruded section of size 150mm length complete all as specified and directed by Engr-in-Charge

S&F for 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

M&L for false ceiling with anodised aluminium grid snap of size 605mmx605mm frame hanging from slab with adjustable 3mm dia GI wire suspension with MS cleat and dash fasteners system including 12mm thick perforated particle board medium density BWR grade of size ,60cmx60cm in size fixed wth staples on snap complete all as specified and directed by Engr-in-Charge

Dismantling stone slab and tiles of any description in any thickness floor of aprons etc. complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 20mm screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge

All as per item No 40 but on vertical surfaces over 10 mm thick plastering in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge

M&L for Marble work 18 to 20mm coloured (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge

M&L for PCC (1:2:4) type B-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L for Glazed ceramic coloured tiles in vertical surface 300 x200x 7 mm thick set including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge

M&L for Non skid ceramic colour tile 7.00 to 8.00 mm thick (square/ rectangular) area exc. 0.11 Sqm and n'exc 0.18 Sqm in floor including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Laid on Floor, over and including 15mm thick screed bed in cement mortar (1:4) Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and directed by Engr-in-Charge.

All as per item no 39 but in skirting including 10mm thick back coat in CM (1:3) complete all as specified and directed by Engr-in-Charge

S&F in repair of 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

S&F in repair 15mm bore stop valve cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as specified and directed by Engr-in-Charge

S&F in repair WHB vitreous china (580x450mm) flat back including connector, waste pipe brackets complete all as specified and directed by Engr-in-Charge

S&F in repairs of 15mm dia bib taps, cast copper alloy, with capstan heads, chromium plated complete all as specified and directed by Engr-in-Charge

S&F in repairs of 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge

S&F in repairs of PVC (SWR) bends (TEE, Elbow & socket) any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs of 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge

S&F in repairs of PVC (SWR) bends (TEE, Elbow & socket) any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs of 32 mm bore waste coupling of PTMT (half or full threaded) (minimum weight 45 gms) complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections 15mm bore pipe complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections 20mm bore pipe complete all as specified and directed by Engr-in-Charge

S&F GI water tubing medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

S&F GI water tubing medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

S&F in repair 100 mm dia cast iron floor trap with grating including jointing to waste pipe in run lead fixed in concrete (1:2:4) type B1 complete all as specified and directed by Engr-in-Charge

Demolition of brick / stone work built in cement mortar including all quoins, arches, pillars etc. excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge

S&F in repair wash down water closet EWC with soft close seat cover and twine flush fitting 710x370x745mm complete fix in repair complete all as specified and directed by Engr-in-Charge. Make: Cera, Cat Part No: s10131145 trap 100 mm or equivalent

S&F in repairs of Vitreous china squtting pan, Orissa pattren of size 580x440mm whit withe integral foot rest (excluding flushing cistern and flush pipe) fixed in repairs, complete all as specified and directed by Engr-in-Charge. Make :- Cera/Parryware

S&F CI "P" or "S" trap 100mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC valveless, syphonic action type, flushing cistern,10 litre capacity, low level white, with inlet, ball valve, float and handle including brackets with all fitting complete all as specified and directed by Engr-in-Charge

S&F in repair Flush pipe of polyethylene of low or high density or PVC.32 mm dia for low level flushing cistern complete all as specified and directed by Engr-in-Charge

S&F in repair PVC connections 15 mm size with PTMT nuts if length 600mm complete all as specified and directed by Engr-in-Charge. Make :- Prayag/Symat

Dismantling of water tank exc 250 but not exc 500 and removing to store complete all as specified and directed by Engr-in-Charge

Dismantling of water tank exc 500 but not exc 1000 and removing to store complete all as specified and directed by Engr-in-Charge

S&F of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), three layered, hoisted and fixed with position of 500 ltrs capacity including tank nipples complete all as specified and as directed by Engr-in-Charge.

S&F of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), three layered, hoisted and fixed with position of 1000 ltrs capacity including tank nipples all fittings complete all as specified and as directed by Engr-in-Charge.

S&F in repairs of framed work such as grills gratings, etc with ends of bars shouldered and or riveted or forged into spikes: framed guard bars barred iron doors ladders framed balusters walk way railing framework of Fe-410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members n,exc, 4kg per Sqm complete all as specified and directed by Engr-in-Charge

M&L for preparing of new steel surfaces of applying two coats of synthetic enemul paint over one coat of red oxide any description, over 10cm in width or girth not otherwise described complete all as specified and directed by Engr-in-Charge

Dismantling asbestos cement corrugated/sami corrugated sheets in roof covering complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by Engr-in-Charge

S&F for MS framed work to angle or other section with gusset plates, rails, braces, etc., complete, and including either hooks and hinges fastening and fixing complete all as specified and directed. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engr-in-Charge.

S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barb at spacing 75mm and staining and fixing to any type of post including securing crossing and staple complete all as specified and directed by Engr-in-Charge

S&F Galvanished steel concertina coil of 600mm spiral dia wire with 2.5mm (coil not less than 8kg and stretched 5 to 6 m) complete all as specified and directed by Engr-in-Charge

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc. 1.5 mtr wide & n. exc. 1.5 mtr deep in soft/loose soil & getting out complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete (1:4:8) type B-2 using 40 mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed by Engr-in-charge

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts for jetting complete all as specified and directed by Engr-in-Charge

M&L for RCC M-20 (Nominal mix) (1:1½:3) using 20mm graded stone aggregate as slabs supported on walls, beam and column and shelves etc complete all as specified and directed by Engr-in-Charge

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per item 91 but dia 6 to 8 mm as in stirrups, spacers & binders for jetting complete all as specified and directed by Engr-in-Charge.

M&L formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge

All as per item No 84 but to sides of rectangular pillars, posts, columns etc. complete all as specified and directed by Engr-in-Charge

M&L for form work to soffits of suspended slab such as roof slabs etc complete all as specified and directed by Engr-in-Charge

Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25CM thick in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated mtrl n.exc.50 Mtr and depositing where directed at a level n.exc.1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for point wiring concealed stranded copper conductor 2.5 Sqmm HRFR cable single core 1100 volts grade in and including ERW rigid steel stove enameled conduit 19/20 mm dia along with all flame proof and weather proof accessories such as multiple junction boxes, covers, elbow, bends, tees etc including 1.5 sqmm HRFR copper conductor (fire guard) for earth continuity and connecting up complete for one switch complete all as specified and directed by Engr-in-charge.

S&F Flame proof weather proof LED 45 watt well glass fittings with IP 66 Degree of protection complete all as site requirement, specified and directed by Engr-in-charge. Make- Shyam Switchgear Pvt Ltd or equivalent as approved by GE

S&F FLP-WP rotary switch with cable termination box in LM6 complete all as specified and directed by Engr-in-charge. Make:- Sudhir

M&L in replacement of sub main wiring with multistanded copper conductor cable FR-PVC sheated in and including concealed in steel conduit and all fitting medium grade with two run of 2.5 Sqmm and one run of 2.5 Sqmm flexible copper wire as earth wire and connected to earth dolly all including chases cutting and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. Make - Plaza

M&L in replacement of sub main wiring with multistanded copper conductor cable FR-PVC sheathed in and including concealed in steel conduit and all fitting medium grade with two run of 4 Sqmm and one run of 4 Sqmm flexible copper wire as earth wire and connected to earth dolly all including chases cutting and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. Make - Plaza

S&F in replacement of sheet metal enclosure for SPN distribuition board 4 way, having IP 43 protection single door flush mounted having 200 Amps bus bar for each phase assembly as per IS 8623 complete all as specified and directed by Engr-in-charge. Make- Indoasian/Havells/Legrand

S&F in repairs of MCB SP, 40 Amp 240 volts complete all as specified and directed by Engr-in-charge.

S&F in repairs of MCB SPN, 40 to 60 Amp 240 volts complete all as specified and directed by Engr-in-charge.

M&L for Cutting chases, pinning in making good to facings where requires and pointing in cement mortar 1;3 to ends or edges of landings, steps cils, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth

S&F metallic flexible pipe 32 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks including connecting accessories

S&F in repairs of wall mounted fan 400mm sweep 230 Volt single phase with suitable fastening elements complete all as specified and directed by Engr-in-charge. Make:- Cat no. 400 mm stylus wall signal white of Orient/ Equivalent in Havells/ Bajaj.

S&F in repairs of point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC casing capping medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/ regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and directed by Engr-in-charge. Make of Wire : Polycab/Havells/ Plaza

One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way

S&F in replacement of Modular switch piano type 10 Amps 0ne way single pole 240 volts A.C complete all as specified and directed by Engr-in-charge. Make-Crabtree/Legrand/Havells

S&F in repairs of ceiling rose, 3 phase / PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-charge. Make: Havells/ Legrand/ Philips.

S&F in repairs of 32x6 mm Copper strip in short pieces on surface or in recess for all interconnecting with ceramic separator/ spacer using suitable nut bolt complete all as specified and directed by Engr-in-charge.

FUTURE ENGINEERING

M/S S.K.Electricals

M/S Delhi Engineering Co.