RENOVATION OF BASKET BALL COURT AND CHILDREN PARK AND PROVISION OF HARD STANDING COVERED SHED AND DADO TILES IN CGKG AT CGRA PARADIP

Amount

S&F to Basket ball court of PP multifuction tiles (Model SF-GRIP-01) ,weight 335 gm/piece,size 304mmx304 mmx, 16 mm thick ,anti slippery ,Anti chlorine agent, tensile strength at break (as per ISO: 527) 20.4 MPa,elongation at break 640%,thermal resistance (at 80 degree centigrade /30 min )no effect,drop impact test (with 1.2kg/1m height )no failure, thermal shock test (at 80 to 0 degree centigrade) No effect, load bearing test (as per ASTMD 695) 22795 kg/tile and game line marking on PP tiles completely court and fixing as per manufacture instruction (incl hacking/ preparation of existing surface / cement repair work to receive the new one) complete all as specified and directed. ( MAKE : SUNDEK)

M&Lfor Basket ball back board of size 1.80x1.50 of fiber glass board with 12mm thick rubber cushion fixed with angle iron frame 50x50x6 mm thick, supported on 40mm wooden plank of 2nd class hard wood bolt to angle iron frame with 12mm dia ring bolted to 6mm thick gusset plate atteched with net/ basket and painting as required complete all as specified and directed.

M&L for preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of floor tiling of any discription and size including cement mortar bedding (but not backing), removing serviceable tiles to store and remaining rubbish off the premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L sand cushion under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for preparation of interlocking tiles by washing, rubbing down dirty surface completely and applying one coat of weather proof antifungal floor tiles paint, exterior grade of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Surface excavation in soft and loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M& L for PCC Type-D2 (1:4:8)using 40 mm graded aggregate as in mass concrete as in foundation complete all as specified and directed.

M&L for PCC Type C1 (1:3:6) 20 mm aggregate as in plinth protection complete all as specified and directed.

M & L for nominal mix of Type B1(1:2:4) using 20 mm aggregate, for foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for nominal mix of Type B1(1:2:4) using 20 mm graded stone aggregates as in columns,posts,piers,struts complete all as specified and directed.

Use and waste of Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate etc as in foundation all as specified and directed.

M&L for 40 mm thick sub base PCC type B1 1:2:4, 20 mm graded aggregate as in sub floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Non -Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Removing excavated material exc.250m and n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, soft and loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

S&F for Steel work in tubular trusses,vertical posts,rafter,purlin including special shaped washer,nuts,bolts for fixing ,tapping,screwing etc. complete using ERW or induction butt welded tubes conforming to IS complete all as specified and directed.

S&F for mild steel screw bolts(machine cut) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not ewxceeding 5 cm long and diameter of neck 5 to 10 mm complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparing new surface of steel and iron work and of any description over 10 CM width or girth ,not other wise describe and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L fly ash modular bricks for masonry wall straight or curved on plan exc 6m mean radius, built in cement morter (1:6 ) complete all as specified and directed.

M&L 15mm thick, rendering in Cement mortar (1:4) on wall of brick surfaces & finished even & smooth w/o using extra cement complete all as specified and directed.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over a coat of 3mm white putty over a coat of primer on walls complete all as specified and directed.

M&L for preparation of old decorated ceiling surfaces by brooming down,steel wire brushing, scraping down moulds,efflorescent salts and trading oil greasy spots and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty surfaces complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surfece 300X200X7mm/450x300x7 mm thick in dados,skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in CM 1:4 as skirting incl hacking for key,scrubbing down with water etc complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified and directed. (Note- Glass shall be measured and paid separately).

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. (Thickness or powder coating not less than 50 micron) complete all as specified and directed. (Note- Glass shall be measured and paid separately).

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

S&F Door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for preparartion of existing surface of wall and applying mural painting over a coat of weather coat paint over a coat of primer at certain places completely all as specified /required as per mural painting site requirement complete all as specified and directed.

Removing of existing paint of any description on concrete surfaces complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete type B0, 1: 11/2:3 (using 12.5 mm graded stone aggregate) as in cills, steps, copings, floor etc and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 10 mm rendering in cement mortar (1:3) on concrete surfaces of floor, finished even and smooth without using extra cement, including water proofing compound @2% by weight of cement complete all as specified and directed.

M&L for preparation of new concrete surfaces and applying two coats of apex floor guard water based, anti skid paint over a coat of priming paint plaster coat complete all as specified and directed.

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit/ not less than 20 mm dia , including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

(a) One light point controlled by one way switch.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals complete all as specified and directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and directed.

S&F Modular Metal Flush Box 6 module complete all as specified and directed.

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. (Make Philips Cat Part No BN021LED40S-6500PSU GR (4 ft)/ Crompton/Wipro or equivalent of makes as mentioned in PS)

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 4 way, with 200 Amp Bus Bar complete all as specified and directed. (Cat No 607711 make -Legrand or Equivallent Make of Siemens/Schneider/L&T.)

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed.

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and fixing LED flood light Tango Mini luminaire with single die ceramic base high power LED of 110Watt, PDC housing and unique flood optics (NB) to ensure uniform distribution, maintenance free system, ideal for area lighting billboard lighting and mini mast lighting complete all as specified and directed. (Make: Philips cat Part no BVP192 LED110 CW HO NB FG GR PSU/Crompton/Wipro or equivalent of makes as mentioned in PS)

Supply and fixing LED post top 40 watt made in die-cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection. complete all as specified and directed. (Make: Bajaj Cat Part No BGCL 40W LED WH/ Philips/ Crompton/Surya)

Material and Labour for Galvanized Iron water tubing " Medium Grade" with all fittings fixed complete to wall/ceiling or laid under floor etc for sizes 40 mm dia Complete all as specified and directed.

M & L for cement concrete in foundation & coping type B1 1:2:4 using 20 mm graded stone aggregate complete all as specified and directed.

Supply & Fixing cable junction box made of thermoplastic, halogen free, weather proof with metric Knock outs for cable entry including four/five pole terminals and cable entry glands for incomming, out going and connection cable with protection grade IP-66/67 of size 205x255x112 mm and suitable for LT under ground cable any size/capacity including bracing clamp,bolts,nuts & washers complete all as specified and directed. (Make Hensel/ model No-KF2525B or Sintex / equivalent as approved)

Supply & Fixing , in replacement, PVC copper cable 3-in core of size 1.5sq mm for junction box to street light fitting connection complete all as specified and directed.

Taking Down old Unserviseable Flood light complete all as specified and directed.

Taking Down old Unserviseable post top lantern complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 4.0 core complete all as specified and directed.

Taking down Old unserviseable cable of any size.complete all as specified and directed.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness complete all as specified and directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply and Fix MCCB 415 Volt 16 KA 4 Pole, 63 Amps in existing panel as outgoing complete all as specified and directed.

M & L for cutting the existing concrete/bituminious road surface width n.exe 30 cm and making good the surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone sggregate over consolidated/rammed earth surface complete all as specified and directed.

M&L GI pipe light grade with all fitting laid in trenches and under road/floor/culverts along with pole etc 50mm bore complete all as specified and directed.

HARI HARA NAYAK