Janpad Ayodhya me Ayodhya Railway Station se Ram Path tak Smart Road (Ksheer Sagar Path) ka Nirman karya

Amount

Dismantling of existing structures like Plain Concrete/Reinforced concrete/ Prestressed concrete structures including cleaning, straightening & cutting of bars including sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) By Mechanical Means. Cement Concrete Pavement.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (Compaction only)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Providing and laying Granular Sub-base (drainage layer) By Mix in Place Method (Construction of granular sub-base by providing close raded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401). Grading–I

Wet Mix Macadam laying Using Mechanical Paver (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)(fresh material)

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road urface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Tack Coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.)

Dense Graded Bituminous Macadam-II (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.)

Bituminous Concrete Grading -II (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects)

Earth work in excavation in trench for foundation in ordinary soil i/c lift upto 1.50 mtr. & lead upto 50.00 mtr and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed bu the E/I within a distance of 50 m. (as per SI No. 251)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

R.C.C. 1:2:4 with cement coarse sand and 20 mm stone grit as per S.I.No 283

M.S. or Iron plain work such as RCC or RB work (when not included in over all rates) wrought to required shape as neccessary including bending for proper completion of the work. S.N.No 504

Mild steel or iron work of small sizes and sections such as holding down bolts, holds fast, tie rods, grating etc. (when not included in over all rates) wrought to required form, including supply of steel bolts, nuts and wastage etc, and their fixing required for proper completion of work.Angle Iron 60x60x6 for stay of cable.

Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & 2 coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103-1950 (SI.No 641&642)

Providing and laying 40MM thick red stone as per specification

Providing and laying of hot applied thermoplastic compound 2.50 mm thick in 100mm widh including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 4 mm thick supported on a mild steel angle iron post 35 mm x 35 mm x 3 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Supply & erection of built up overhead structure 12.00M Span comprising of two vertical posts of 6.00 M high made up of 350 m N.B. Class M.S. Pipe as vertical member welded with 12mm thick M.S. Plate 900x900mm at bottom & 10 mm thick 750x750mm at top for bearing of horizontal frame comprising of 50mm N.B. made class main pipe as of 32mm Class medium N.B. Pipe bearing as per approved designed paint complete the works i/c construction of RCC foundation of size 900x900mm & 1.5M deep for built up overhead structure i/c earth work in excavation 100mm thick lean concrete in 1:4:8 cement coarse sand and 20mm stone grit, i/c supply & grouting of 32mm dia foundation bolts (600mm long) of Engineer in charge.

Supply fixing & erection of built up cantilever structure 6.00M Span comprising of one vertical posts of 6.00 M high made up of 300 mm N.B. havi Class M.S. Pipe as vertical member welded with 10mm thick M.S. Plate at top & 12mm plate at bottom. the horizontal truss shall comprise of 50mm dia havy class M.S. pipe and 40mm dia heavy M.S. pipe as bracing & 10 mm M.S. plate bottom for fixing to vertical post as per structure desing & drawing with one of sttel primer and two coats of synthetic enamel plant. the work i/c construction of RCC foundation of size 90Mx90M of required depth as per site condition for built up structure i/c earth work in excavation 100 mm thick lean concrete in 1:4:8 cement sand and 40mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20mm stone grit i/c supply and fixing of 25mm dia foundation bolts 600 mm long as per provision of structure design i/c cost of renforcement & shuttering. as per direction of Engineer in charge.

Supply and fixing rectro reflective sign board made up with 4mm thick aluminium composite panel (ACP) face full coverd with high intesity prismatic retro reflective sheeting of approved specification as per M.O.R.T & H having approved message fully processed on by pressure sensitve equipment banc of ACP with frame of 35x35x4mm angle iron all round and cross with proper clamping arrangement to be fixed in structure. the back of the ACP sheet shall be enamel coated. as per direction of Engineer in charge.

HAZARD MARKER Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 4 mm thick supported on a mild steel angle iron post 35 mm x 35 mm x 3 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

VILLAGE/HOSPITAL/SCHOOL SIGN BOARD Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 4 mm thick supported on a mild steel angle iron post 35 mm x 35 mm x 3 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

REPEATED BAR Providing and laying of hot applied thermoplastic compound 5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Supply and fixing of reflective raise the pavement marker with its body surface made of tough a S a acrylic styrene Acrylonitrile) or HIPS ( Hi- impact Polystyrene)or acrylonitrile butadiene styrene (ABS). The marker shall support a load of thousand three 35 KG tested in accordance with a STMD4280 and its reflective panels shall consist of number of lenses containing single or dual is a Matic cubes of providing total internal reflection of the light entering the lens face retro reflecting surface LB 35 plus or -5° to base and area of each retro reflecting surface shall not be less than 13 cm² Road states shall be legible with name trade mark or other means of identification of the manufacturer dimensions of road studs so it should not be less than 100mm x 100mm x 10mm-RPM with shank as per ASTM.