Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.4 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹81.7 L+₹66,704 (0.82%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹95.0 L+₹14.0 L (17.2%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹1.0 Cr+₹22.0 L (27.2%)Rejected-Finance F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹1.1 Cr+₹27.7 L (34.1%)Rejected-Finance | L5 | Rejected-Finance other than lowest |
| Sl No | Description | Qty | Unit | RAJENDRA CONSTRUCTION L7 | Advait Enterprises L4 | MADHU ENTERPRIZES L1 | SHRI SAI ENTERPRISES L2 | Nexus Infratech L5 | Nilesh Construction L3 | jalandhara construction L8 | SHREE JAGDISH FURNITURE CO. L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in repairs steel rolling shutters, without ball bearing, as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type 1 mm thickness of laths and applying two coat of syntetic enamel paint over a coat of redoxide primer complete all as specified and directed by Engineer-in-Charge. | 100 | Sqm | 4,400 ₹4,40,000 | 2,500 ₹2,50,000 | 1,700 ₹1,70,000 Lowest | 1,800 ₹1,80,000 | 2,400 ₹2,40,000 | 3,500 ₹3,50,000 | 5,500 ₹5,50,000 | 3,700 ₹3,70,000 |
| 2.00 | -Ditto as per item no -1 but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge. | 150 | Sqm | 7,000 ₹10,50,000 | 2,450 ₹3,67,500 | 1,900 ₹2,85,000 Lowest | 2,000 ₹3,00,000 | 3,550 ₹5,32,500 | 3,800 ₹5,70,000 | 7,000 ₹10,50,000 | 4,700 ₹7,05,000 |
| 3.00 | S& F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge. | 90 | Each | 1,600 ₹1,44,000 | 745 ₹67,050 | 1,000 ₹90,000 | 850 ₹76,500 | 300 ₹27,000 | 500 ₹45,000 | 250 ₹22,500 Lowest | 647 ₹58,230 |
| 4.00 | S & F in repairs ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge. | 60 | Each | 380 ₹22,800 | 395 ₹23,700 | 1,800 ₹1,08,000 | 850 ₹51,000 | 300 ₹18,000 | 400 ₹24,000 | 250 ₹15,000 Lowest | 417 ₹25,020 |
| 5.00 | Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing of mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed by Engineer-in-Charge. Note : For taking down and refixing above rolling shutters
(i) new parts shall be measured and paid separately.
(ii) Necessary scaffolding shall be included in the rate. | 45 | Each | 3,200 ₹1,44,000 | 1,000 ₹45,000 | 800 ₹36,000 | 900 ₹40,500 | 2,000 ₹90,000 | 1,600 ₹72,000 | 2,000 ₹90,000 | 647 ₹29,115 Lowest |
| 6.00 | -Ditto- as per Item No.5 above but area of shutters exc 10 sqm and n.exc 20 sqm each complete all as specified and directed by Engineer-in-Charge. Note : For taking down and refixing above rolling shutters
(i) new parts shall be measured and paid separately.
(ii) Necessary scaffolding shall be included in the rate. | 40 | Each | 5,250 ₹2,10,000 | 2,000 ₹80,000 | 1,250 ₹50,000 | 1,400 ₹56,000 | 3,300 ₹1,32,000 | 2,000 ₹80,000 | 3,000 ₹1,20,000 | 888 ₹35,520 Lowest |
| 7.00 | -Ditto- all as per srl item No.5 but area of shutter exc 20sqm each complete all as specified and directed by Engineer-in-Charge.
Note : For taking down and refixing above rolling shutters
(i) new parts shall be measured and paid separately.
(ii) Necessary scaffolding shall be included in the rate. | 28 | Each | 11,000 ₹3,08,000 | 2,500 ₹70,000 | 1,600 ₹44,800 | 1,700 ₹47,600 | 4,300 ₹1,20,400 | 2,200 ₹61,600 | 4,000 ₹1,12,000 | 1,047 ₹29,316 Lowest |
| 8.00 | S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing spring complete all as specified and directed by Engineer-in-Charge. | 105 | Each | 900 ₹94,500 | 900 ₹94,500 | 700 ₹73,500 | 750 ₹78,750 | 300 ₹31,500 Lowest | 400 ₹42,000 | 300 ₹31,500 Lowest | 2,700 ₹2,83,500 |
| 9.00 | S&F factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing spring complete all as specified and directed by Engineer-in-Charge. | 90 | Each | 1,050 ₹94,500 | 1,000 ₹90,000 | 800 ₹72,000 | 950 ₹85,500 | 455 ₹40,950 | 450 ₹40,500 | 350 ₹31,500 Lowest | 3,700 ₹3,33,000 |
| 10.00 | S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing spring complete all as specified and directed. | 90 | Each | 1,400 ₹1,26,000 | 1,200 ₹1,08,000 | 1,000 ₹90,000 | 1,350 ₹1,21,500 | 555 ₹49,950 | 480 ₹43,200 | 400 ₹36,000 Lowest | 4,700 ₹4,23,000 |
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
1 Sept 2025, 6:00 pmClosed
CWE (NW) Mumbai
CWE (NW) Mumbai
REPAIR TO ROLLING SHUTTERS,STEEL GATES, ROOF ETC FROM L-5 AREA TO LION GATE TO ASD BUILDINGS REPAIRS TO ROLLING SHUTTER,FLOOR TILES, TOILETS, CEILINGS,STEEL GATES,ROOF AND ALL CONNECTED WORKS AT ZONE 4 5 OF ASD BLDGS UNDER AGE B/R-II OF GE(NW) KUN
2025_MES_723075_1
8472/CWE(NW)Mumbai/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Kunjali
Class B
Category a (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹2.0 L
Yes
2 Jan 2026
29 Jul 2025
3 Sept 2025
29 Jul 2025
1 Sept 2025
19 Aug 2025
29 Jul 2025 - 18 Aug 2025
Amount
S & F in repairs steel rolling shutters, without ball bearing, as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type 1 mm thickness of laths and applying two coat of syntetic enamel paint over a coat of redoxide primer complete all as specified and directed by Engineer-in-Charge.
-Ditto as per item no -1 but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge.
S& F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge.
S & F in repairs ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge.
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing of mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed by Engineer-in-Charge. Note : For taking down and refixing above rolling shutters (i) new parts shall be measured and paid separately. (ii) Necessary scaffolding shall be included in the rate.
-Ditto- as per Item No.5 above but area of shutters exc 10 sqm and n.exc 20 sqm each complete all as specified and directed by Engineer-in-Charge. Note : For taking down and refixing above rolling shutters (i) new parts shall be measured and paid separately. (ii) Necessary scaffolding shall be included in the rate.
-Ditto- all as per srl item No.5 but area of shutter exc 20sqm each complete all as specified and directed by Engineer-in-Charge. Note : For taking down and refixing above rolling shutters (i) new parts shall be measured and paid separately. (ii) Necessary scaffolding shall be included in the rate.
S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing spring complete all as specified and directed by Engineer-in-Charge.
S&F factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing spring complete all as specified and directed by Engineer-in-Charge.
S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing spring complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing spring complete all as specified and directed.
S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified amd directed.
S&F in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters complete all as specified and as directed.
S&F in repair mild steel pressed beval handles 150mm long, oval type, stove enamelled black all as specified and as directed.
S&F for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and easy operation of shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME greasing and easing in position shall be considered.
S&F for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for greasing and easing in position of mild steel rolling shutters of area exc 20sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for preparing new or previously untreated surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.
M&L for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing to store from terrace all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
Material & Labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in mass concrete to floors finished fair and smooth without using extra cement complete all as specified and directed.
M & L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate ) as in mass concrete to floors finished fair and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) mixed with integral water proofing compound and finished even and fair complete all as specified and directed by Engr-in-Charge. Note- Water proofing compound will be measured and paid for separately.
Material & Labour for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as a levelling course on roof surfaces complete all as specified and as directed by Engr-in-Charge
Material & labour for preparing roof surfaces and applying water proofing treatment as per manufacturers instructions and comprises of the following activities:- (a) Apply one coat of bituminous primer @ 0.2 Kg per Sqm. (b) Apply evenly a coat of bitumen 85/25 confirmimg to IS:702 heated to working temperature of 180 C at the rate of 1.2 kg per sqm (c) Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.00 Kg/Sqm reinforced with non woven polyster matt,weighing more than 160g/sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap.The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. (d) Apply solar reflective bituminous aluminium paint @ 100 gm/Sqm (e) Ponding test including supply of water for 72 hours after completion of water proofing work. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick across the intermediate with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips channel at 457 mm centre to centre complete all as specified and as directed by Engr-in-Charge.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-Charge.
M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel complete all as specified and as directed by Engr-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
S&F mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
M & L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.
Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.
S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.
S&F pre-painted hot- dip aluminium-zinc alloy metallic coated plain steel sheet, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.
Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and as directed by Engineer-in-charge.
M&L for non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc. 0.11 Sqm but n. exc. 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for 350mm x 250mm or 450mm x300mm x 7-8 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick backing coat in cm 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..
M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smoth without using extra cement on walls complete all as specified and as directed.
M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.
M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including all as specified and directed. (Water proofing compound to be measured and paid for separately).
Supply only integral water proofing compound complete all as specified.
M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.
M &L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and as directed by Engr in-Charge
M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed by Engr in-Charge
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified including all necessary scaffolding etc.complete all as specified and directed by Engr in-Charge
Material & labour for prepration of old plastered / decorated surfaces of walls and applying one coat of weather acrylic base paint complete all as specified and directed by Engr in-Charge
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper complete all as specified and directed by Engr in-Charge.
M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engr in-Charge.
M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.
S&F plain aluminium sheeting, alloy 31000H4, 1.25mm thick as in covering to door shutters et, cut to size, edge beads punched including rivets with plain 40mm ap joints including bending turning up, mitered angles, stopped ends, outlets etc, as required as in repairs complete all as specified and as directed
Dismantling structural steel works in doors, gates etc but excluding framed truss etc complete all as specified and directed by Engr in-Charge.
S&F rolling shutter with ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear box,etc gear operated type with chain wheel and hand chain and one shop coat of primer erected in position complete all as specified and directed by Engr in-Charge.
S&F rolling shutter without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, push pull or manual type and one shop coat of primer erected in position as directed.
Supply & Fixing wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured)
S&F collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and as directed.
M&L for old surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scafolding complete all as specified and directed
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed
M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.
M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and as directed.
Providing and applying double layer with crack sealer of approved Make given in Appx 'B' to PS for repairing the cracks of the external wall areas complete all as specified and as directed.
M&L preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Raincoat over a coat of primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge.
M&L for plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed .
M&L for preparation of old painted wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scafolding complete all as specified and as directed
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and as directed
SHRI SAI ENTERPRISES (BID ID -3404214)
Nilesh Construction (BID ID -3411921)
Advait Enterprises (BID ID -3399582)
Nexus Infratech (BID ID -3405634)
SHREE JAGDISH FURNITURE CO. (BID ID -3405039)
RAJENDRA CONSTRUCTION (BID ID -3404629)
jalandhara construction (BID ID -3400839)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .