GE(P)AF/GUR-33/2020-21

Amount

Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion of TABLE BEDSIDE STEEL ,FD/E6/MAP/15(R) Complete all as specified and as applicable as drawings NOTE : Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaon including BSO's Furniture Yard as directed by Engineer-in-Charge:-

18/19mm thick prelaminated particle board for sides, top and front of table bed side of size 450mmx500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg with screws.

Legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg.

One coat of synthetic black paint on all steel portion of table bed side steel, complete.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD-255/383

Top of 18/19 mm thick prelaminated particle board of size 900mmx450mm placed in position at top with 4mm thick teak wood edging alround the edges of the top and fitted with screws as shown in drg.

25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Rubber shoes 18mm square of high quality placed in position as shown in drg.

One coat of synthetic white paint on all steel portion of teapoy verandah complete.

All as per item No 1.00 here-in -before but CHAIR SCHOOL WITH HAND BOARD,FD/E6/MAP/05

Scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel grey colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge,

One piece PVC seat and back and fixing the same by providing four screws as described in drg.

18mm thick prelaminated particle board top open able/hand board with 4mm thick teak wood edging including polish and fixing the same by providing hinges/screws as described in drg

Hard rubber shoes as per drg

All as per item No 1.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03 or similar

Top of table

Key board tray of table with telescopic chanel

Drawer of table with telescopic chanel

Shelves of table

Vertical side shelf

All as per item No 1.00 here-in -before but BOOK CASE STEEL- FD-1028

Applying one coat of synthetic enamel paint olive green including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete.

Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete.

Handle steel chromium plated size- 100mm long including removing of unserviceable handle steel from Book case steel shown on drg (FD-1028) complete.

Glass pane 3mm thick including removing of unserviceable/broken glass pane from Book case steel shown on drg (FD-1028) complete.

All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD/E6/MAP/17

Top of 18/19 mm thick prelaminated particle board of size 750mmx450mm placed in position at top with 4mm thick teak wood edging alround the edges of the top and fitted with screws as shown in drg.

18mm sq MS pipe for legs of teapoy of 522 mm length welded to adjacent part as shown in drg.

5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg

Rubber shoes 18mm square of high quality placed in position as shown in drg.

One coat of synthetic black paint on all steel portion of teapoy verandah complete all as specified and directed

All as per item No 1.00 here-in -before but RACK STEEL Adjustable open type ,FD-1038

Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 1.00 here-in -before but SIDE RACK WITH TRAY STEEL, FD-1023 or similar .

Back to rack three tiers steel made of 1mm thick MS sheet of size 840mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack three tiers steel made of 1mm thick MS sheet of size 355mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 840mmx355mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

CHARPOY FOLDING IP WITH HARD TOP, FD-388 (R )

Taking out existing unserviceable /broken plywoodfrom the charpoy folding IP with hard top by unscrewing nut,bolt ,washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench .Supply and fixing new 8/9mm thick plywood commercial ISI marked of suitable for charpoy IP folding with hard top fixed over the 25 mm conduit pipe with new GI carriage bolt , nut and washers complete all as specified and directed by Engr-In Charge.

Supply and fixing new rubber shoes 25mm dia of high quality placed in position as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of charpoy folding complete.

All as per item No 1.00 here-in -before but BED HARD STEEL (FD/E6/MAP/08(R )

12mm commercial ply placed in position as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

Head Rest as per drg

Foot Rest as per Drg

All as per item No 1.00 here-in -before but RACK STEEL 9'x4'x2'

Back to rack six tiers steel made of 1mm thick MS sheet of size 2700 mmx1200mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack six tiers steel made of 1mm thick MS sheet of size 600mmx2700mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 1200mmx600mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 1.00 here-in -before but ALMIRAH LARGE STEEL 1/2 h x 1/2 shelves FD-114, 1033,FD/E6/MAP/18

Lock 6 lever suitable for Almirah large steel as per shown drg.

Handle 125 mm suitable for almirah large steel as per shown on drg

Leg as per drg

Shelves as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Painting to almirah large internally and externally with synthetic enamel paint of existing color after preparation of surfaces.

All as per item No 1.00 here-in -before but ALMIRAH MED STEEL 1/2 h x 1/2 shelves FD-114, 1034

Lock 6 lever suitable for Almirah large steel as per shown drg.

Handle 125 mm suitable for almirah large steel as per shown on drg

Leg as per drg

Shelves as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Painting to almirah medium internally and externally with synthetic enamel paint of existing color after preparation of surfaces.

All as per item No 1.00 here-in -before but CHAIR COMPUTER, FD/E6/MAP/01

Removing unserviceable damaged Seat & back of Chair computer, supply and fixing of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed by Engr -in charge.

All as per item No 1.00 here-in -before but CHAIR VISITOR ,TP Make: Geekan/ESC/Godrej/ETC

Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with leatherite upholstery and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge

All as per item No 1.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01

12mm commercial ply placed in position as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

All as per item No 1.00 here-in -before but CHAIR REVOLVING HIGH BACK)TP Make: Geekan/ESC/Godrej/ETC

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

All asper Item No 1.00 here -in- before but SOFA single seater/ two seater /three seater chrome plated arms and legs (TP) Make: Geekan/ESC/Godrej/ETC

Continuous Gas welding as required .

Taking out old pressed /torn old cushions fron sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa two seater of size 1870 mm (L)x 800 (D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa three seater of size 2110(L)x 965(D) x 825(H) and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H) and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa two seater 1870 mm (L)x 800 (D) x 815 mm (H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa three seater 2110(L)x 965(D) x 825(H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

All as per item No 1.00 here-in -before but CHARPOY GI PIPE,FD-220:-

Taking out existing unserviceable plywood/MDF from the frame of charpoy GI pipe. Tightening each part of the entire frame of charpoy by using pipe wrench ,Supply and fixing of 02 Nos flat Iron of size 32mm x 5 mm duly painted in black colour of length equal to width of plywood/GI charpoy.Drilling holes 02 Nos each in long rails,02 nos each in short rails & 01 nos on both flat iron at centre .Supply and fixing 12mm thick plywood commercial ISI marked of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply ,flat iron and rail )with GI carriage bolt , nut and washers 6mm dia 62 to 65mm long complete all as specified and directed by Engr-in-charge.

Removing the broken ends long rail of charpoy from the frame : cutting the broken end , rethreading up to required length and fitted to the charpoy frames all as per drg or as directed.

Taking out broken Unserviceable long rail from Charpoy and supply and fixing new long rail made out of galvanized steel tubing 32mm bore Med grade(ISI Marked) both ends threaded complete all as specified and as shown on drg.

Taking out old broken end short rail from three way elbow by unscrewing and replacing with of GI pipe made out of long rail retrieved vide serial item 10.04 here-in-before duly threaded both ends to require size fitted to the frame. Complete all as specified and as shown on drg.

Taking out old broken end leg from three way elbow by unscrewing and replacing with legs of GI pipe made out of short trail retrieved vide serial itemNo. 10.05 here-in-before; duly threaded both ends to required size fitted to the frame complete all as shown on drg.

Assembling the whole charpoy by tightening loose parts i-e long rail, short rail, legs and elbow, so as to complete the frame after carrying out the threading of each rail and leg , if necessary.

Three way elbow by unscrewing and replacing with new three way elbow GI 32mm bore/dia ISI marked. complete all as specified as shown on drg and as directed.

Taking out old unserviceable GI check nut from the frame by unscrewing and replacing with new check nut GI 32mm bore/dia as per sample kept in BSOs office and as directed.

All as per item No 1.00 here-in -before but Filing Cabints 04 drawers , TP/FD-127

Lock 6 lever suitable for Almirah large steel as per shown drg.

Handle 125 mm suitable for almirah large steel as per shown on drg

Leg as per drg

Shelves as per drg

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Painting to almirah medium internally and externally with synthetic enamel paint of existing color after preparation of surfaces.

Removal of following existing unserviceable cane/old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair writing as applicable as per drg No.D-261/280/250 . Note : -Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaon including BSO's Furniture Yard as directed by Engineer-in-Charge.

Back rest

Leg Stiffener

Front Leg

Rear Leg

Scratching the entire wooden pallets of chair, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the chair shall be polished with French polish after properly cleaned and smoothened the surface. Complete all as specified and as directed by Engr-in-Charge.

Removing the existing unserviceable cane plastic from the chair and Recanning the following Chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE complete all as specified and as shown on drgs:-

All asper Item No 21.00 here -in- before but TABLE DINING FOR 8 PERSONS:-FD-273 / 239:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

L-shape corner of flat iron 38x3mm 4" x 4" to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE WRITING:-FD- 249/275:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Sides of the box.

Shutter

Long rail

Long stiffener.

Short rail

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE DRESSING GENTS FD- 230:-

Plywood commercial 12 mm thick to the back of the table.

Prelaminated particle board 18 mm thick to the side of the table .

MDF board 18 mm thick veneered at the bottom of the table.

Ply wood commercial 6 mm thick to bottom of drawer .

Prelaminated particle board 18 mm thick to the top of table.

Looking glass 5 mm thick of the table as per drg with plywood commercial 6mm thick on the back.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE DRESSING LADIES FD- 251, Fd/E6/MAP-II/07

Plywood commercial 12 mm thick to the back of the table.

Prelaminated particle board 18 mm thick to the side of the table

MDF board 18 mm thick veneered at the bottom of the table.

Ply wood commercial 6 mm thick to bottom of drawer.

Prelaminated particle board 18 mm thick to the top of table.

Looking glass 5 mm thick of the table with plywood commercial 6mm thick on the back all as specified.

Openable shutter 12mm thick BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with best quality leatherite tapestry as approved by BSO/GE.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD-281 Make: Geekan/ESC/Godrej/ETC

Wooden batten

Teak wood bearer

Taking out old pressed /torn old cushions and Supply 32 density thick foam cushion of size 21”x22”x4” duly covered with good quality tapestry all over(Not less than Rs 250 per metre)cloth of approved color and shade by GE.

Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality tapestry cloth ( Not less than Rs.250 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.

Scratching the entire wooden pallets of sofa 3 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

Scratching the entire wooden pallets of sofa single seater, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE DINING (1200X900) 4' X 3' WOODEN :- FD/MAP-II/03:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

L-shape corner of hard wood 4" x 4" to the Table between legs and rail .

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface

All asper Item No 21.00 here -in- before but HAT STAND WITH MIRROR,FD-233:-

Wooden frame of 50mmx20mm

3/4mm back ply

Steel /aluminium pegs.

4mm thick mirror of size 440mmx300mm .

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE 3' X 2' /900x600 mm WITHOUT DRAWER;- FD-231 & 284:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak colour, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

Leg stiffener

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TV TROLLEY,FD/E6/MAP/04(R )

Top of trolley made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood all as specified

Sides

Base/Shelves

5.5mm thick plain glass with magnetic catchers.

50mm dia swivel type castors

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface

All asper Item No 21.00 here -in- before but TABLE 3' X 2' WITH DRAWER;- FD-224 & 283 or similar

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak colour, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

Leg stiffener

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TEAPOY WOODEN,FD- 232/278:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

Stiffener

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE CENTRE ,FD-235/375 / 274 or similar :-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

Stiffener

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but BED PLY TOP:FD-246:-

Long Rail

Head Rest

Foot rest

Plywood 12 mm thick commercial ISI marked

Scratching the entire wooden pallets of bed, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface

All asper Item No 21.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD-239 / 273:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

L-shape corner of flat iron 4" x 4" to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but SIDE BOARD :FD-241:-

Foot rest

Back ply

Door shutter

Drawer

Scratching the entire wooden pallets/exposed ply of side board, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE BED SIDE ,FD-265/276/248:-

Sides.

Shelves

Back ply

Scratching the entire back ply of table , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface.

All asper Item No 21.00 here -in- before but TABLE PEG ,FD-236/277/384:-

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Rails

Stiffener

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface

All as per item No 21.00 here-in -before but Servicing Table 10'x4'x2'.6', (TP)

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

L-shape corner of flat iron 38x3mm 4" x 4" to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All as per item No 21.00 here-in -before but Servicing Table 8'x4'x2'.6', (TP)

Top of table made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick edging of teak wood complete all as specified.

Long rail

Short rail

L-shape corner of flat iron 38x3mm and 200mm long to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion of artical Complete all as specified and as applicable as drawings, TABLE 900X600X760MM WITH/ with out drawer,Dining FD-1008& 1007 or similar. NOTE : Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaon including BSO's Furniture Yard as directed by Engineer-in-Charge:-

Table top of size 900mmx600mm made of 18mm thick prelaminated particle board including 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Continuous Gas welding as required.

Stiffeners as per drg.

Shoes all as per drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed.

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces.

All as per item No 41.00 here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029

Continuous Gas welding as required .

Aluminum hasp and staples as specified in drg and approved by the Engineer-in-Charge including removal of old UNSV hasp and staples.

CP steel conduit pipe 16mm dia 22 G including removal of old existing UNSV hanging conduit pipe.

Handle as per sample kept with BSO.

Foot rest made out of 1mm thick PBI sheet as specified in Drg including removal of Unserviceable foot rest. Complete all as specified and as shown on drg.

Repairs, denting and painting of lockers throughout inside/out side with one coat of paint synthetic enamel OG Paint as approved by Engineer-in-Charge.

All as per item No 41.00 here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1004.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.

Lock of drawer with 6 liver suitable for table clerk steel as per shown on drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed.

Stiffeners as per drg.

Shoes all as per drg.

Table top of size 1200mmx600mm made of 18mm thick prelaminated particle board including 4mm thick teak wood edging all as per drg

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces

All as per item No 41.00 here-in -before but TABLE OFFICE OFFICER STEEL: FD-84/ 1003.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg

Lock of drawer with 6 liver suitable for table office officer steel as per shown on drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown, complete.

Stiffeners as per drg

Shoes all as per drg

Table top of size 1370mmx760mm made of 18mm thick prelaminated particle board including 4mm thick teak wood edging all as per drg

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces

All as per item No 41.00 here-in -before but CHAIR VERANDAH:-, FD-,256,359,259

Spot gas welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 3.5mm to 4mm wide, white colour, (MAT Pattern),quality as approved by GE/Engr-in-Charge.

Removing the existing unserviceable cane plastic / newar from the chair verandah and supply and fixing PVC seat 4mm thick in lieu of cane after providing two additional stiffener at centre of seat & back with 25x5 mm flat Iron welded with centre of the frame duly white painted for support of PVC seat. .Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO and GE before supply.

Best quality new PVC shoes to the legs of chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality.

All as per item No 41.00 here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M)

Scratching the entire frame of chair and applying one coat of synthetic enamel olive green paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge

02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge.

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers

Second class Hard wood Arm rest as per drg

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

All as per item No 41.00 here-in -before but CHAIR REVOLVING EXECUTIVE MED BACK)TP Make: Geeken/ESC/Godrel/ETC

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removal of following existing unserviceable cane/old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Dining as applicable as per drg No.FD-279/262/228/FD/MAP-II/05. Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaon including BSO's Furniture Yard as directed by Engineer-in-Charge.

Back rest

Leg stiffener

Front leg

Rear Leg

Scratching the entire wooden pallets of chair dining, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the chair shall be tighten, properly cleaned and smoothened before polish.. Complete all as specified and as directed by Engr-in-Charge.

Removing the existing unserviceable cane plastic from the chair dining and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE complete all as specified and as shown on drgs.

Removing the existing unserviceable cane plastic from the chair and supply and fixing PVC seat 4mm thick in lieu of cane after providing corner support and one additional stiffener at centre for support of PVC seat. The PVC seat shall be fixed with proper screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tidy. The PVC seat shall get approved from BSO and GE before supply. MAKE OF PVC SEAT –AMKO/COMFO or equivalent as approved by GE.

All asper Item No 48.00 here -in- before but CHAIR EASY,FD-229/358:-

Rear leg

Front Leg

Rail seat

Stiffener

Back rest

Scratching the entire wooden pallets of chair, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the chair shall be polished with French polish after properly cleaned and smoothened the surface. Complete all as specified and as directed by Engr-in-Charge.

Removing the existing unserviceable cane plastic from the chair and Recanning the following Chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE complete all as specified and as shown on drgs:-

All asper Item No 48.00 here -in- before but CHAIR DINING LONG BACK/ OFFICERS ,FD/E6/MAP/10, FD-357:-

Back rest

Teak wood vertical stiffener

Front Leg

Rear leg

Stiffener

Seat made of 12mm thick BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by BSO/GE.

Scratching the entire wooden pallets of chair, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the loosen chair if any shall be tighten, properly cleaned and smoothened before polish Complete all as specified and as directed by Engr-in-Charge.

Note:- The amount of Rs 62733/- against Schedule of Credit on Page No 125 to 129 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/s Kapil Furniture

M/S Parshant Associates

SOHAN SINGH AND SONS

M/S R.M. Builders

SMS Enterprises